Accessories

$110.00
For G30 and G30SL
G30 Barrel Shorten and Recrown
$110.00
Service to reduce barrel length removing the barrel choke making the barrel better for slugs. Service

The service executes the following:
- Reduce barrel length by 2.5″ to remove the choke.
- Recrown barrel.
- We provide a new shorter replacement barrel shroud.
This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.

The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.

Any outstanding balance must be paid before we ship out the service order.
Select options
Price range: $110.00 through $175.00
PCP Air Compressor Filter 4500psi Oil Water Separator
Price range: $110.00 through $175.00

A quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.

Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.

Made from high-quality aircraft aluminum and is rated for safe use.

Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.

Available with a 47″ high-quality stainless steel fitting hose to allow for convenient filling of your PCP.

Select options This product has multiple variants. The options may be chosen on the product page
$110.00
MDSR1 Micro Dot Sight with Riser
Axeon Optics
$110.00
Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

Features:
- 1X Magnification
- 20mm Objective
- Red Dot LED Reticle
- .50 MOA Adjustment Size
- Adjustable Windage and Elevation
Select options
$112.00
EagleVision 1/1.8″ 12MM LENS GoPro 2, 3 AND 4
GOPRO 2, 3 and 4 lens 4K 1/1.8” 12MM, M12 X 0.50
$112.00
Lens fits the GoPro 2, 3 and 4.

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/2.3″ version but this 1/1.8″ version (this one) is better because the lens allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.
Select options
From $125.00
This Builder Starts With the Tactical Adapter
TacVenger DIY KIT CUSTOM
From $125.00

This is where you can build your own TacVenger Kit to install on your existing Avenger.

Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.

The Kit Starts with the Buck Rail Tactical Grip Adapter.

then you simply add the items you want in your kit and you are all set!

The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.

Select options
Sale!
Price range: $125.00 through $130.00
300CC 4.5K PSI M18 Threaded CF Tank (Long)
0.30L M18 Thread Carbon Fiber Tank (Long)
Price range: $125.00 through $130.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 300cc/0.30L capacity Long Tank
- Available in Gloss Or Matte
- 251mm x 55mm
- M18 Threaded
Shown Below On the HajiNotos
Select options This product has multiple variants. The options may be chosen on the product page
Price range: $130.00 through $215.00
for .177, .22 and .25 NOT .30
Gauntlet Short Shroud Combo
Price range: $130.00 through $215.00
Part fits Gauntlet 1 or Gauntlet 2 .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

Stock baffle spring must be used!
Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

If Your Gauntlet is:
- .177 Get a .177/.22 Supressor
- .22 Get a .22/.25 Supressor
- .25 Get a .25/.30 Supressor
Select options This product has multiple variants. The options may be chosen on the product page
Sold out!
$130.00
EV Custom 1/1.8″ 12MM LENS
GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
$130.00
Lens fits the GoPro 5, 6 and 7.

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using GoPro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens, and because it is 12mm, you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Custom GoPro fitting Lens
We stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC

Just click HERE to be redirected to this product on his website.
Be sure to tell Bob that Hajimoto sent ya ?
Read more
Sale!
Original price was: $150.00.Current price is: $130.00.
User adjustable M18 regulator
Huben Power Black Hawk Pro
Original price was: $150.00.Current price is: $130.00.
The Huben Power Black Hawk Pro is a very stable, high-flow M18 threaded adjustable regulator that allows the user to adjust the output pressure to what is required for the application. The quality of materials and craftsmanship is top-tier. We tested these regulators here at Hajimoto Productions and the standard deviation was so low it was incredible.

Works with but is not limited to the following:
Umarex Gauntlets, Skout Evo 30, Skout Evo 25, and Skout Epoch 22

FEATURES
- Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
- Streamline and slim structural design
- Thread: Bottle = M18*1.5 and PCP = G1/2-14
- Max up to 4500psi high-pressure gauge input.
- Regulating output pressure range 500psi~3000psi
- Comes with a standard 8mm quick disconnect male foster fitting for filling.
- Dust caps may be green or black at random.
- The regulator has a high airflow rate, is lightweight, easy to operate, rebuildable, and designed for use with HPA/CO2.
- Please note: When storing high-pressure for a long period of time, creep phenomenon (an increase in output pressure) may occur. After the creep phenomenon occurs, the original output pressure will be restored after one shot.
SKOUT USERS*
This regulator does not have a pin on the top of the regulator. This means EPOCH owners are ok, but EVO cannot use this regulator.
Select options
Sold out!
$134.00
SC-40 ONLY not a full kit
Eaglevision Side-Cam SPLITTER ONLY
$134.00

Please note:

This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)

Select options This product has multiple variants. The options may be chosen on the product page
$135.00
300CC 4.5K PSI M18 Threaded CF Tank Short
0.30L M18 Thread Carbon Fiber Tank Short
$135.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 300cc/0.30L capacity Short Tank
- Matte Finish
- 196mm x 62mm
- M18 Threaded
Select options
138 to 338
Build your own Tactical Gauntlet Kit
Gauntlet Tactical Combo Builder
138 to 338

Gauntlet Tactical Builder!

If you just want the Tactical Grip Adapter Product Page, Click HERE

You select the parts you wish to add to your existing Gauntlet 1, Gauntlet 2, or Gauntlet 30 to convert it to a lightweight Tactical tack driver.

The builder starts with the Grip Adapter, fore grip, and included pistol grip.

Installation video is listed below

The Video Starts with the rear trigger group screw removed. To install the M5x20 fastener shown in the video, the fastener must be removed.

Select options