Umarex Gauntlet Strip Stak Pak (Bundle)

for .177, .22 and .25 NOT .30

for .177, .22 and .25 NOT .30

$45.00

Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.

BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.

Air Stripper comes with o-ring and silicone grease for installation.

 

 

Clear
SKU: HPGSTP Categories: , , , , , , , Tags: , , ,

Description

Simple installation instructions:

Always make sure the airgun is unloaded and uncocked before working on the shroud or the barrel. Remove the magazine or shot tray, cock, and shoot in a safe direction to be sure the airgun is unloaded and safe. Engage the trigger safety before working on the shroud or barrel to install the Strip Stak Pak.

  1. Remove the barrel shroud end cap.
  2. Remove the baffle and spring from inside the barrel shroud.
  3. Unscrew and remove the barrel shroud.
  4. Remove the stock air stripper.
  5. Install HP Air Stripper on the barrel and apply supplied silicone grease to the HP Air Stripper O-ring.
  6. Carefully and straight install the barrel shroud and screw on.
  7. Reinstall baffle spring.
  8. Install baffles in the order shown on the packaging.
  9. Reinstall shroud cap.

Additional information

Weight 1 oz
Dimensions 1 × 1.5 × 1.5 in
Caliber

, ,

1 review for Umarex Gauntlet Strip Stak Pak (Bundle)

  1. Ronald Rodimon –

    So this is a complete kit? The air stripper, plus the baffles for the Gauntlet .22, using the stock shroud? I am going to use on my .22 with stock shroud. I have got the Shogun 8″ silencer already and want these to make even quieter. Will the 3 items work together to make it very, very quiet?

    • Hajimoto –

      Yes, this is a stripper and baffle combo. They can be used in conjunction with a full-sized suppressor to mitigate sound even more as long as the stock length barrel shroud is used.

Add a review

Related products

  • Sold out!
    $35.00
    Evanix Rainstorm II Baffle Stack
    $35.00

    Evanix Rainstorm II Baffle Stack

    Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
    The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
    The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

    Baffles should be pointing towards the breech

    <= Towards the breech —— Towards the Muzzle of shroud =>

    [░░] <░] <░░] <░░] <░] <░] <░░] <░░] CAP
    SO    SC     NC     NC    SC   SC    NC     NC

    SO = STAND OFF
    NC = NORMAL CONE
    SC = SHORT CONE

    Select options
  • Tatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • $150.00
    Sumo 1.6 x 6.25 inches
    $150.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.