Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter

for .177, .22 and .25 NOT .30
(2 customer reviews)

for .177, .22 and .25 NOT .30

$60.00

Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

This part is designed and manufactured by DonnyFL

8 in stock

SKU: HPGSSDF Categories: , , , , , ,

Description

This shroud is 3 inches shorter than OEM. I basically removed the plastic baffle that came with the gun and added a 1/2 x 20 adapter. This allows you to put a bigger suppressor in the front and make this gun super quiet. If you install a Sumo, all you will hear is the hammer spring. The overall length is 23 inches.

Remember, You must use the OEM spring with the short Shroud.

The HP Air Stripper 2.0 is now compatible with the short shroud, you can use either the OEM stripper, HP Air Stripper 2.0 or the DonnyFL aluminum air stripper.

Features:

  • 23 inches overall
  • CNC
  • Matte black anodize

Additional information

Weight 8 oz
Dimensions 23 × 1 × 1 in

2 reviews for Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter

  1. lance.miller (verified owner) –

    Well made and the shorter shroud keeps the barrel length within reason while using a moderator.. Just not sure if the relief holes should be drilled again like Hajimoto recommends in this original video.. There are other add-ons I’m considering I’m just not sure the gun warrants anymore investment.. This is a must install though if you want to keep your gun quiet & maneuverable while in the woods.

  2. Steve Horch –

    Great shroud to shorten length.. Quality replacement. Very pleased

Add a review

You may also like…

  • Tatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • $150.00
    Sumo 1.6 x 6.25 inches
    $150.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Gauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options

Related products

  • Sold out!
    $35.00
    Evanix Rainstorm II Baffle Stack
    $35.00

    Evanix Rainstorm II Baffle Stack

    Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
    The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
    The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

    Baffles should be pointing towards the breech

    <= Towards the breech —— Towards the Muzzle of shroud =>

    [░░] <░] <░░] <░░] <░] <░] <░░] <░░] CAP
    SO    SC     NC     NC    SC   SC    NC     NC

    SO = STAND OFF
    NC = NORMAL CONE
    SC = SHORT CONE

    Select options
  • Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Hajimoto Flex Reg on 22ci Aluminum 3K for the G1

    Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Introducing a Hajimoto Productions Exclusive offer!

    22ci/360cc/.36L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1500 to 2300PSI

    If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

    Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

    A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options
  • Umarex Gauntlet Tune O-ring Kit
    $17.00

    Gauntlet 1 and Gauntlet 2

    Umarex Gauntlet Tune O-ring Kit
    $17.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.