Trigger work

$55.00

The service can be added to an existing tune/build or a stand-alone ship in service. If you are shipping me your trigger group, you simply decock and degas the Gauntlet, remove it from the stock, and remove the two fasteners that hold the group to the bottom of the pressure tube.

If you elect the stand-alone ship service, shipping instructions will follow which detail the packaging and address to ship to.

Clear

Description

This service is for polishing and adjusting the stock single-stage trigger group for a more smooth and predictable pull and break.

The service includes:

  • Polishing of the sear face
  • Polishing of the trigger tongue face
  • Assess third washer binding
  • Replace stiff trigger weight spring
  • Adjusting final trigger weight
  • Adjusting break travel
  • Adjusting over travel distance

If you are looking to send in your trigger group for custom work, you place the order. As normal will receive an order received notification. Shortly after that, you will receive a second notification with details associated with packaging and shipping them in for service.

Additional information

Weight 224 oz
Dimensions 49 × 10 × 8 in
Service Option

Part of a build/tune, Stand alone service

Reviews

There are no reviews yet.

Be the first to review “Trigger work”

You may also like…

  • Sale!
    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00$93.00

    Gauntlet STK

    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00$93.00

    THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
    IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

    The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

    Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile and there is no better chronograph than the FX Pocket Radar V2. (Power examples given are the .22 caliber version Gauntlet 1) 

    For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
    BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

    CONTENTS:

    • Adjuster Plug Assembly.
    • Smaller, Lighter Composite Poppet.
    • Hajimoto Hammer Spring (Black Long)
    • Lighter Trigger Spring (Bright Small).
    • 5/64″ Allen Wrench For Adjusting Power.

    The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
    Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

    Be sure to follow my written instructions in the document below.
    Use the video to install but follow these written instructions to adjust and tune the STK:

    Written Detailed Tuning Instructions for the STK

    More details below.
    Always read the content below because any revised instructions, video, photos, or other links will be there.

    Select options