Shogun 1.6 x 8 inches

$185.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

Clear
SKU: HPDFLSHO Categories: , , , Tags: , , , ,

Description

  • If you thought Sumo was quiet wait until you hear Shogun. Shogun is just like Sumo but 1.5 inches longer. We added an additional 1 inch chamber as well as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective.
    • Available in .22/.30 calibers with 1/2 x 20 UNF threaded end cap
    • Mono-core design to increase accuracy and limit the chances of pellet clipping
    • No moving parts or epoxy that may become loose after 1000’s of rounds
    • Precision CNC’d by professional machinist
    • Sand blasted and anodized for maximum durability
    • Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
    • Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
    • Comes pre-wrapped in felt
    • Machined grooves on the outside for easy handling.
    • Weight 7.2 oz

Additional information

Weight 6 oz
Dimensions 8 × 1.6 × 1.6 in
Caliber

,

Reviews

There are no reviews yet.

Be the first to review “Shogun 1.6 x 8 inches”

Related products

  • High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options
  • Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    5/8″-18UNF Threaded Unit

    Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
    Say goodbye to only one fixed output pressure!
    The user has an 800PSI adjustment swing!
    Requires minor forestock modification.
    The regulator thread is 5/8-18UNF

    The Ninja Flex regulator is available in any 900PSI spread to a maximum of 3100PSI output but for the Gauntlet select from the proper configuration.
    If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

    How to read the below configurations
    Example: Flex Reg .22 | 4500/1600 to 2400 psi
    Flex Reg .22 = Regulator Type for .22 caliber
    4500/ = The bottle’s maximum fill pressure
    1600 to 2400 psi = The output range of the Flex Reg

    Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex Reg .177/.22 |3000/700 to 1500PSI

    Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex Reg .25 | 3000/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
    Stock .22 | 4500/1900PSI Regulator
    Flex Reg .22 | 4500/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
    Stock .25 | 4500/2100PSI Regulator
    Flex Reg .25 | 4500/1600 to 2400PSI

    Flex Reg Configuration For G30 Cal
    Stock .30 | 4500/2800PSI Regulator
    Flex Reg .30 | 4500/2100 to 3100PSI

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Select options
  • Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Hajimoto Flex Reg on 22ci Aluminum 3K for the G1

    Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Introducing a Hajimoto Productions Exclusive offer!

    22ci/360cc/.36L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1500 to 2300PSI

    If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

    Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

    A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.