Shogun 1.6 x 8 inches

$185.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

Clear
SKU: HPDFLSHO Categories: , , , Tags: , , , ,

Description

  • If you thought Sumo was quiet wait until you hear Shogun. Shogun is just like Sumo but 1.5 inches longer. We added an additional 1 inch chamber as well as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective.
    • Available in .22/.30 calibers with 1/2 x 20 UNF threaded end cap
    • Mono-core design to increase accuracy and limit the chances of pellet clipping
    • No moving parts or epoxy that may become loose after 1000’s of rounds
    • Precision CNC’d by professional machinist
    • Sand blasted and anodized for maximum durability
    • Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
    • Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
    • Comes pre-wrapped in felt
    • Machined grooves on the outside for easy handling.
    • Weight 7.2 oz

Additional information

Weight 6 oz
Dimensions 8 × 1.6 × 1.6 in
Caliber

,

Reviews

There are no reviews yet.

Be the first to review “Shogun 1.6 x 8 inches”

Related products

  • Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Hajimoto Flex Reg on 22ci Aluminum 3K for the G1

    Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
    $195.00

    Introducing a Hajimoto Productions Exclusive offer!

    22ci/360cc/.36L Aluminum Tank 3000PSI
    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex 22 .177/.22 |3000/700 to 1500PSI

    Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex 22 .25 | 3000/1500 to 2300PSI

    If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

    Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

    A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

    Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

    The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

    When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

    Select options
  • Gauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options
  • High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.