Saber Tactical Tank Valve adapter

Related products

• Sold out!

  

  $154.95 – $155.00

  Ninja High Pressure Metric M18 Custom Output

  $154.95 – $155.00

  

  Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.

  

  We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

  You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

  The ball and spring are provided but removed from the regulator.

  Take advantage of a quality regulator for your high pressure application.
  
  MADE IN THE USA!
  Ninja HP Metric regulator output pressures in increments of 100PSI.
  This is a M18 threaded regulator made for M18 threaded bottles.
  This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
  Simply select your desired output pressure from 1100PSI TO 3100PSI
  All custom built pressure units will have a +/- 75 psi tolerance.
  
  If you need a low output build with a fixed out of of something between 
  300 psi and 1100 psi, the CUSTOM pessure option and provide the output
  desired in the notes.
  
  If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
  You will want the 5/8"-18 Version that is found HERE

  Select options
  Quick view

• 

  $22.00

  30mm Long Quick Connecter

  Extended Fill Coupler

  $22.00

  •  Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
  •  This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
  •  If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
  •  Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
  •  A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.

  Select options
  Quick view

• 

  $18.50

  Umarex Gauntlet Regulator Shim Pak

  $18.50

  Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

  I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

  The shim kit contains:

  • 2 – #5 Shims.
  • 1 – #3 Shim.
  • 2 – #2 Shims.
    (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)

  To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
  To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
  The included two #2 shims are for minor adjustments if you have a finicky regulator.

  DETAILED LESSON/EXAMPLE:
  Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

  Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

  You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

  If you rapid fill, there is a good chance you will pop your burst disc.

  

   

  Select options
  Quick view