Notos Bottle Converted – Barrel Band (Stock Barrel)

With and Without Rail 300cc or 360cc bottle
Sale!
Notos Bottle Converted - Barrel Band (Stock Barrel)
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 2
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 3
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 4
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 5
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 6
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 7
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 8
Notos Bottle Converted - Barrel Band (Stock Barrel) - Image 9

With and Without Rail 300cc or 360cc bottle

$25.00 – $30.00

 ** THIS BARREL BAND IS FOR THE STOCK BARREL THAT HAS THE MOLDED SUPPRESSOR IN PLACE  – CLICK HERE IF YOU HAVE THE HAJIMOTO MODIFIED BARREL**
Available in two sizes and with or without Picatinny rail:
  • 300cc/0.3L version
  • 360cc/036L version
  • Adds the necessary support and rigidity of the long bottle conversion assembly.

The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attaching of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

This Barrel band is specifically designed for a Umarex Notos with our HubenPower Dream TK  installed with our 300cc or 360cc carbon fiber bottle with stock barrel suppressor installed.

Clear
SKU: HPNTSBBSTK Categories: , , , , , , Tags: , , , , , , ,

Description

  • Part is made from ABS/Carbon Fiber.
  • Designed for the Umarex Notos with the HubenPower Dream TK installed but the barrel has the fixed suppressor still installed.
  • Available for our 300cc or 360cc carbon fiber bottles.
  • Comes in two flavors, with a Picatinny rail or without a rail
  • Overall Dimensions: 3″ x 3″ x 5″
  • Weight: 3oz
NOTE: If you are experiencing excessive barrel lifting or pulling, check that the tank and barrel are parallel along their length. Sometimes if the rifle is degassed and stood pointing up, the assembly relaxes and allows the band to be installed and then the riffle is filled without causing any elevation changes.

Installation Instructions are provided with each barrel band.

Additional information

Weight 3 oz
Dimensions 5 × 3 × 1.4 in
Band Configuration

No Rail, With Rail
Bottle Size

300cc, 360cc

Reviews

There are no reviews yet.

Be the first to review “Notos Bottle Converted – Barrel Band (Stock Barrel)”

Related products

  • HP Baffle Stack For Umarex Gauntlet
    $20.00
    HP Baffle Stack For Umarex Gauntlet
    $20.00

    Part fits either the original Gauntlet or the Gauntlet 2

    THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

    Select options
  • Tatsu 1.6 x 4.25 inchesTatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • HP Strip Stak Pak for AvengerHP Strip Stak Pak for Avenger
    $47.00

    Air Stripper, Tension Spring and Baffle Stack

    HP Strip Stak Pak for Avenger
    $47.00

    UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

    Strip Stak Pak for the Avenger

    A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
    Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2025

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.