$365.00
ALL NEW!
Direct replacement with no modifications required for the Umarex Gauntlet 2 and Gauntlet 30 Cal!
22.5ci/370cc/.37L CE Certified CF Tank
Shaves off 1/2 a pound of weight compared to the 4500psi stock aluminum tank.
Includes the UX/Ninja X-Regulator.
The CF Tank is CE Certified, made to ISO 11119-3 standard. The cylinder has a seamless aluminum alloy 6061 liner wound with high-strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This 4500 PSI carbon fiber bottle is 22.5ci and is gorgeous on the Gauntlet series of PCP.
The Gauntlet 1 will need the inside diameter of the tank shroud increased slightly to allow the foregrip/tank cover to slide over this carbon fiber tank, or simply remove the tank shroud.
Operating Pressure Recommendations
Gauntlet 1:
 .177/.22 Stock operating pressure 1100PSI Max Recommended pressure is 1400PSI.
.25 Caliber Stock operating pressure 1900PSI Max Recommended pressure is 2300PSI.
Gauntlet 2:
 .22 Stock operating pressure 1900PSI Max Recommended pressure is 2150PSI.
.25 Caliber Stock operating pressure 2100PSI Max Recommended pressure is 2400PSI.
NINJA REGULATORS ARE MADE IN THE USA!
Direct replacement for the aluminum tank and regulator that comes on the Gauntlet 2 or Gauntlet 30.
The custom unit can be ordered in any custom regulator output pressure in 100 PSI increments.
NOTE: The regulator output will be +/- 50 PSI of the requested output.
| Weight | 25 oz |
|---|---|
| Dimensions | 14.5 × 2.25 × 2.25 in |
| Regulator Output | 1100 PSI, 1200 PSI, 1300 PSI, 1400 PSI, 1500 PSI, 1600 PSI, 1700 PSI, 1800 PSI, 1900 PSI, 2000 PSI, 2100 PSI, 2200 PSI, 2300 PSI, 2400 PSI, 2500 PSI, 2600 PSI, 2700 PSI, 2800 PSI, 2900 PSI, 3000 PSI, 3100 PSI |
You must be logged in to post a review.
Includes G1, G2, G30, G2SL, & G30SL variants
Available in the classic Picatinny rail version or the 15mm thick rail less version.
Versions for Gauntlet 1, Gauntlet 2, Gauntlet 30 as well as the SL Versions!
Part fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
Specifically for the AV Avenger
Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.
This part is designed and manufactured by DonnyFL
Reviews
There are no reviews yet.