$154.95 – $155.00
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.
This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.
You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP Metric regulator output pressures in increments of 100PSI. This is a M18 threaded regulator made for M18 threaded bottles. This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance. If you need a low output build with a fixed out of of something between 300 psi and 1100 psi, the CUSTOM pessure option and provide the output desired in the notes. If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30 You will want the 5/8"-18 Version that is found HERE
Ninja M18*1.5 Threaded High Pressure Regulator
Made for 4500PSI Metric M18*1.5 threaded bottles.
American made Ninja Regulator.
Custom output pressure for your
needs.
We build the regulator to any custom
output pressure in 100 PSI increments.
| Weight | 9 oz |
|---|---|
| Dimensions | 5 × 2.5 × 2.5 in |
| Regulator Output | 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100, CUSTOM |
You must be logged in to post a review.
As the name implies, this is the Ultimate Gauntlet 2 build.
The Gold, Platinum and Ultimate Packages are the only builds where data trends are supplied with your build. You received detailed data sheets with a matrix to show exactly how your rifle performed and what adjustment limits you can perform in easy to follow terms. Different ammo weights are charts as well as actual shot results of your rifle as it was tuned to achieve maximum accuracy.
You get optic, 22.5ci 4500PSI carbon fiber tank, externally adjustable regulator, hammer preload adjustment, Two stage trigger, DonnyFL Sumo suppressor, bipod, 300BAR portable compressor for air independence and so much more!
Important note: Our Sidelever cocking system requires the shooter to hold the Sidelever rearward during magazine changes
We supply you with a Umarex Gauntlet 2 completely tuned and every option available to go out and blasticate!
See way down below for a detailed description and breakdown of what is included.
Ordering procedures:
You will add any and all items to your cart including this Turnkey Gauntlet. Please use the notes section to communicate any special requests like trigger preferences or if you’re buying a scope and want a specific zero distance.
Lastly, if an item you want is out of stock and therefore your unable to add it to the cart, you can use the notes section to request the item as part of your build and we will settle up before the airgun ships.
When I receive this order, I will build it based on the information provided, and before the airgun ships, any credits or additional charges need to be settled.
Commonly asked questions once the Tuned Gauntlet is received:
Question: How do I change the power?
Answer: Here is a video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition.
HOW TO ADJUST POWER WITH STK
Question: How do I tune using the STK?
Answer: For written instructions on how to adjust the Super Tune Kit, click the below link.
WRITTEN STK ADJUSTMENT INSTRUCTIONS
Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.
Evanix Air Speed Air Stripper and Baffle Stack _
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. Air stripper come with o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Replacement Air Stripper 0-ring is 14mm x 1.5mm
Regulator Service or Pressure Change
This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.
Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.
Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.
When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.
This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.
Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.
Reviews
There are no reviews yet.