$360.00 – $419.00
Awesome configurations if you don’t care if the Gauntlet bottle shroud stays off. The 700cc on the G30 is beast mode!!!
Ninja Paintball High Pressure Regulator mounted on a quality 0.37L (370 cc), 0.5L (500cc) or 0.7L (700cc) a 4500PSI rated Carbon Fiber Cylinder.
Please be advised that if you use the 370 cc bottle and want to continue to use your stuck bottle shroud, be sure to remove any MSLOT accessories off the tank shroud before sliding it over your new carbon fiber tank as it will scratch it.
Watch my video below that goes over how to modify the brass inserts so they don’t scratch the tank also.
We build the regulator to any custom output pressure in 100 PSI increments from 1100PSI to 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.
While the video below is for the the Power Flex install, the tank shroud brass insert modifications are the same. It is strongly recommended that you watch the video to understand what needs to be altered so you don’t scratch or gouge your carbon fiber tank.
| Weight | 32 oz |
|---|---|
| Dimensions | 19 × 3 × 3 in |
| Regulator Output | 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100 |
| Tank Size | 0.37L (370cc), 0.5L (500cc), 0.7L (700cc) |
You must be logged in to post a review.
As the name implies, this is the Ultimate Gauntlet 2 build.
The Gold, Platinum and Ultimate Packages are the only builds where data trends are supplied with your build. You received detailed data sheets with a matrix to show exactly how your rifle performed and what adjustment limits you can perform in easy to follow terms. Different ammo weights are charts as well as actual shot results of your rifle as it was tuned to achieve maximum accuracy.
You get optic, 22.5ci 4500PSI carbon fiber tank, externally adjustable regulator, hammer preload adjustment, Two stage trigger, DonnyFL Sumo suppressor, bipod, 300BAR portable compressor for air independence and so much more!
Important note: Our Sidelever cocking system requires the shooter to hold the Sidelever rearward during magazine changes
We supply you with a Umarex Gauntlet 2 completely tuned and every option available to go out and blasticate!
See way down below for a detailed description and breakdown of what is included.
Ordering procedures:
You will add any and all items to your cart including this Turnkey Gauntlet. Please use the notes section to communicate any special requests like trigger preferences or if you’re buying a scope and want a specific zero distance.
Lastly, if an item you want is out of stock and therefore your unable to add it to the cart, you can use the notes section to request the item as part of your build and we will settle up before the airgun ships.
When I receive this order, I will build it based on the information provided, and before the airgun ships, any credits or additional charges need to be settled.
Commonly asked questions once the Tuned Gauntlet is received:
Question: How do I change the power?
Answer: Here is a video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition.
HOW TO ADJUST POWER WITH STK
Question: How do I tune using the STK?
Answer: For written instructions on how to adjust the Super Tune Kit, click the below link.
WRITTEN STK ADJUSTMENT INSTRUCTIONS
Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.
Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown
Regulator Service or Pressure Change
This is a service to repair, test, leak test, adjust or increase the output pressure of a Umarex Gauntlet 1 or 2, regulator to a customer’s requested output. The regulator will be tested and calibrated to within +/- 75 PSI. Parts such as Gauges, Burst discs, Bonnets, Pistons, Caps, or Regulator bodies are not included. If parts are determined to be required to repair the regulator, pricing will be determined, quoted, and will need to be paid prior to the return of the regulator.
Please note that if you have a Taiwan-produced regulator, which is the regulator that is located at the top of the photo, there are very limited corrections that can be made to these units and you may end up needing a new regulator. Please use the notes area to provide the Generation and caliber of the rifle. Also, give as much detail as possible of the issue or the requested pressure output and so forth.
Once the order is physically reviewed, you will receive a second notification with details associated with packaging and shipping the items in for service.
When you place the order for the above-described service, you will receive an order processing notification. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your regulator or regulator and tank assembly.
This service is not a hydro test of the tank/bottle and is focused only on the regulator’s functionality and visual inspection assemblies.
Please note that this service is not associated with any manufacturer’s warranty, so please be sure to exhaust all warranty options prior to sending us your regulator for service as our working on the part voids any manufacturer-provided warranties.
Part fits either the original Gauntlet or the Gauntlet 2
THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.
Reviews
There are no reviews yet.