$155.00
Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight. A complete regulator rebuild kit is included!
This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown. Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25 Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator
All aluminum construction that holds 3000PSI. The 13ci air capacity is equal
to the stock Umarex Gauntlet generation 1 tank.
Can be ordered in any custom regulator output pressure in 100 PSI increments.
NOTE: The regulator output will be +/- 50 PSI of the requested output.
| Weight | 18 oz |
|---|---|
| Dimensions | 9 × 2 × 2 in |
| Select Presure | 1100 PSI, 1200 PSI, 1300 PSI, 1400 PSI, 1500 PSI, 1600 PSI, 1700 PSI, 1800 PSI, 1900 PSI, 2000 PSI, 2100 PSI, 2200 PSI, 2300 PSI, 2400 PSI |
You must be logged in to post a review.
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Introducing a Hajimoto Productions Exclusive offer!
22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI
Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSI
If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE
Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.
A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
Part fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
Installation Video for 1.5″ Picatinny rail on the Umarex Gauntlet forearm.
Reviews
There are no reviews yet.