$139.99
Introducing a Buck Rail and Hajimoto Collaboration! A super strong tactical conversion kit for the Umarex Gauntlet!
Accessory options include a Grip, Buffertube, and Collapsable Butt Stock
This tactical conversion kit is available for all versions of the Umarex Gauntlet PCP. Just select which variant you have and you're good to go. This kit comes with all the fasteners to attach the chassis and forearm to your Umarex Gauntlet.
Add a pistol grip, buffer tube, and buttstock and you are AR style rocking it!
| Weight | 9 oz |
|---|---|
| Dimensions | 9 × 4 × 4 in |
| GAUNTLET VERSION | G1 (177/22/25), G2 (22/25), G30, G2 SL22, G2 SL25, GSL30 |
You must be logged in to post a review.
Fits the G1, G2 or G30
Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
Please see the installation video below for more details.
Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.
AR Pistol Grip
A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.
Material: Dupont Zytel 30% glass filled nylon
Made in the USA
Adjustable Butt Stock
Buttstock Assembly, 6 Position, Mil Spec, Carbine, Black
AR Stock Folder
A basic affordable stock folding adapter that allows your PCP to take up 30% less space in your bag or back pak. This basic folder is an excellent choice for anyone looking to improve the versatility and portability of their tactical style PCP.
FEATURES
(* The hinge does have a certain amount of play when locked in either position.)
Tube and Nut
Mil Spec buffer tube and castle nut that attaches to the tactical chassis and supports an adjustable Butt Stock
A2 Pistol Grip
A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.
Material: Dupont Zytel 30% glass filled nylon
Made in the USA
Air Stripper, Tension Spring and Baffle Stack
UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.
Strip Stak Pak for the Avenger
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.
Replacement Air Stripper 0-ring is 14mm x 1.5mm
Fits Gauntlet 1, 2 even the .30 Cal
Available in the classic Picatinny rail version or the 15mm thick rail less version.
Fits both the original Gauntlet as well as the Gauntlet 2 including the G30 or G30SL!
Gauntlet 1 and Gauntlet 2
Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2
Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.
I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.
Some of the NO-Ring seals have the leading edge precision ground.
These tapered / precision ground types need to be installed as shown below
(Images are of the .30 caliber NO RING)
You get:
.
jim100mt (verified owner) –
Well Made and sturdy. My Gauntlet G2 .22 feels less clunky and I can now mount a bi-pod without worrying about POI change. Put a Magpul Beaver Tail Grip on the stock along with a Luth-AR MBA-1 Buttstock folding hinge. Now looking at getting another kit for my .25 Gauntlet 2 but first need to create a knob for my hammer spring adjustment screw that will fit between chassis and hammer spring cap (shouldn’t be difficult).
tommydaddio (verified owner) –
I just put on my new gauntlet conversion kit looks amazing. Great job Haji.