$139.99
Introducing a Buck Rail and Hajimoto Collaboration! A super strong tactical conversion kit for the Umarex Gauntlet!
If you would rather use the Gauntlet Tactical Builder Interface, click HERE
Accessory options include a Grip, Buffertube, and Collapsable Butt Stock
This tactical conversion kit is available for all versions of the Umarex Gauntlet PCP. Just select which variant you have and you're good to go. This kit comes with all the fasteners to attach the chassis and forearm to your Umarex Gauntlet.
Add a pistol grip, buffer tube, and buttstock and you are AR style rocking it!
| Weight | 9 oz |
|---|---|
| Dimensions | 9 × 4 × 4 in |
| GAUNTLET VERSION | G1 (177/22/25), G2 (22/25), G30, G2 SL22, G2 SL25, GSL30 |
You must be logged in to post a review.
AR Pistol Grip
A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.
Material: Dupont Zytel 30% glass filled nylon
Made in the USA
Tube and Nut
Made in the USA Mil Spec buffer tube and castle nut that attaches to the tactical chassis and supports an adjustable Butt Stock
AR Stock Folder
A basic affordable stock folding adapter that allows your PCP to take up 30% less space in your bag or back pak. This basic folder is an excellent choice for anyone looking to improve the versatility and portability of their tactical style PCP.
FEATURES
(* The hinge does have a certain amount of play when locked in either position.)
Fits the G1, G2 or G30
Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
Please see the installation video below for more details.
Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.
A2 Pistol Grip
A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.
Material: Dupont Zytel 30% glass filled nylon
Made in the USA
Adjustable Butt Stock
Buttstock Assembly, 6 Position, Mil Spec, Carbine, Black
Part fits either the original Gauntlet or the Gauntlet 2
THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.
for .177, .22 and .25 NOT .30
Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.
This part is designed and manufactured by DonnyFL
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Introducing a Hajimoto Productions Exclusive offer!
22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI
Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSI
If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE
Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.
A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
.
jim100mt (verified owner) –
Well Made and sturdy. My Gauntlet G2 .22 feels less clunky and I can now mount a bi-pod without worrying about POI change. Put a Magpul Beaver Tail Grip on the stock along with a Luth-AR MBA-1 Buttstock folding hinge. Now looking at getting another kit for my .25 Gauntlet 2 but first need to create a knob for my hammer spring adjustment screw that will fit between chassis and hammer spring cap (shouldn’t be difficult).
tommydaddio (verified owner) –
I just put on my new gauntlet conversion kit looks amazing. Great job Haji.