Gauntlet O-ring service

$95.00

This service tears the entire air rifle down, cleans and inspects for part wear, and replaces all the o-rings in your Gauntlet. Whether the o-rings are leaking from age or wear, whether the rifle is actually leaking or not, all o-rings are replaced. The rifle undergoes an incoming inspection which captures the functional and physical condition of the air rifle. This information is presented in a report which must be reviewed and approved prior to any work can begin.
The o- rings that are replaced are:

    • (2) Regulator to gun o-rings.
    • (1) Stock end cap o-ring.
    • (1) Stock air stripper o-ring.
    • (1) Barrel to shroud support collar at breach block o-ring.
    • (2) Bottle block to pressure tube o-rings.
    • (1) Valve body o-ring.
    • (2) Pellet probe o-rings.
    • (3) Barrel to breach block o-rings.

The action is verified and lubricated prior to returning the rifle. The rifle undergoes a pressure test for 24 hours to guarantee there are no pressure losses.

 

SKU: HPSRVSTK-1-1 Categories: , , Tags: , , ,

Description

This service takes your Umarex Gauntlet apart and replaces every single o-ring in the air rifle. Shipping is based on the typical Umarex Gauntlet box of 14lbs.  Anything received that is larger or heavier than the standard, will need to have the shipping cost adjusted prior to return shipping. 

Please note that because the rifle is completely torn apart the user will need to resight/rezero the air rifle.

When you place the order for the above-described service, you will receive an order received notification. Shortly after that, you will receive a second notification with details associated with packaging and shipping them in for service.

Additional information

Weight 208 oz
Dimensions 49 × 10 × 8 in
SERVICE OPTION

Install STK in Gauntlet, No trigger work, Install STK, Trigger Spring and Trigger adjustment

Reviews

There are no reviews yet.

Be the first to review “Gauntlet O-ring service”

You may also like…

  • Sale!
    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $93.00

    Gauntlet STK

    Super Tune Kit (STK) for Gauntlet 1 and 2
    $75.00 – $93.00

    THIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
    IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCK

    The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment which opens all the possibilities of lower or higher foot-pounds (FPE) of energy for whatever the user desires. Do you need only 5FPE no problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!

    Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required in order to know what the rate of travel is of the projectile and there is no better chronograph than the FX Pocket Radar V2. (Power examples given are the .22 caliber version Gauntlet 1) 

    For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation as there is a difference and improperly selected kits are not returnable.
    BE SURE TO SELECT THE CORRECT GENERATION GAUNTLET

    CONTENTS:

    • Adjuster Plug Assembly.
    • Smaller, Lighter Composite Poppet.
    • Hajimoto Hammer Spring (Black Long)
    • Lighter Trigger Spring (Bright Small).
    • 5/64″ Allen Wrench For Adjusting Power.

    The single largest performance increase modification item is available for the Gauntlet 1 and Gauntlet 2.
    Consider adding the o-ring kit so you have all that you need should one of the factory o-rings get damaged during the kit installation, see option below.

    Be sure to follow my written instructions in the document below.
    Use the video to install but follow these written instructions to adjust and tune the STK:

    Written Detailed Tuning Instructions for the STK

    More details below.
    Always read the content below because any revised instructions, video, photos, or other links will be there.

    Select options

Related products

  • Sold out!
    Real 2 Stage Trigger for the Gauntlet
    $110.00

    Fits the G1, G2 or G30

    Real 2 Stage Trigger for the Gauntlet
    $110.00

    Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.

    • The Trigger Is Stainless Steel 17-4 Through Hardened
    • The Trigger Shoe Is Aluminum 6061-T6

    Please see the installation video below for more details.

    Super Tune Kit Users
    You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.

    Read more
  • Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    5/8″-18UNF Threaded Unit

    Flex Reg Hajimoto Configurations
    $149.00 – $159.00

    Newly redesigned unit
    Now has a high pressure and low pressure burst discs!

    Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
    Say goodbye to only one fixed output pressure!
    The user has an 800PSI adjustment swing!
    Requires minor forestock modification.
    The regulator thread is 5/8-18UNF

    The Ninja Flex regulator is available in any 900PSI spread to a maximum of 3100PSI output but for the Gauntlet select from the proper configuration.
    If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

    How to read the below configurations
    Example: Flex Reg .22 | 4500/1600 to 2400 psi
    Flex Reg .22 = Regulator Type for .22 caliber
    4500/ = The bottle’s maximum fill pressure
    1600 to 2400 psi = The output range of the Flex Reg

    Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
    Stock .177/.22 | 3000/1100PSI Regulator
    Flex Reg .177/.22 |3000/700 to 1500PSI

    Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
    Stock .25 | 3000/1900PSI Regulator
    Flex Reg .25 | 3000/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
    Stock .22 | 4500/1900PSI Regulator
    Flex Reg .22 | 4500/1600 to 2400PSI

    Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
    Stock .25 | 4500/2100PSI Regulator
    Flex Reg .25 | 4500/1600 to 2400PSI

    Flex Reg Configuration For G30 Cal
    Stock .30 | 4500/2800PSI Regulator
    Flex Reg .30 | 4500/2100 to 3100PSI

    Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

    Select options
  • $65.00
    Gauntlet Regulator Tester
    $65.00

    Assembled and tested by Hajimoto using quality US Parts! Don’t guess what the output of your Gauntlets regulator is, KNOW what it is especially if you are adding shims and need to hit a specific PSI output.

    Designed to be used with any Paintball style Regulator that uses the industry-standard G1/2-14 Threads like these shown

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.