G Barrel Transfer Port Work

For all G barrels in all calibers

For all G barrels in all calibers

$50.00

Service to improve the barrels transfer port by enlarging and polishing the inlet. All calibers benefit from this service when trying to achieve maximum power and efficiency from your build.

SKU: HPSRVBRLCMBR-1 Categories: , , , , Tags: , , ,

Description

The service executes the following:

  • The barrel transfer port is increased and polished. This modification allows for superior air flow and power generation.
  • This can be added to a custom build order or can be a send in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

Once the order is received, a follow-up email will be provided and depending on the service request will contain detailed shipping instructions which will include shipping addresses and label information information.
This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need calculated and communicated to you prior to the order shipping back.

This balance will need to be paid before the shipping of the order.

Reviews

There are no reviews yet.

Be the first to review “G Barrel Transfer Port Work”

You may also like…

  • G30 Barrel Shorten and Recrown
    $110.00

    For G30 and G30SL

    G30 Barrel Shorten and Recrown
    $110.00

    Service to reduce barrel length removing the barrel choke making the barrel better for slugs. Service

    The service executes the following:

    • Reduce barrel length by 2.5″ to remove the choke.
    • Recrown barrel.
    • We provide a new shorter replacement barrel shroud.

    This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

    Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
    This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.

    The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.

    Any outstanding balance must be paid before we ship out the service order.

    Select options
  • $110.00
    Gauntlet Barrel Tune
    $110.00

    This service is for all Umarex Gauntlets regardless of generation or caliber. Including all .177, .22, .25 and .30 caliber versions.

    Service to increase the airflow of the air rifle to allow for better power, performance, and efficiency. Barrel transfer port increased, Barrel leade is properly set & polished, Bore is lapped and polished, and the crown is machined and polished.

    Select options

Related products

  • Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    For Gauntlet .177, .22, .25 and .30 Calibers

    Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

    Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design or the new magnetic lidded version.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
    • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
    • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
    • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • $60.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Short Shroud with 1/2 x 20 Adapter
    $60.00

    Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.

    This part is designed and manufactured by DonnyFL

    Select options
  • Umarex Gauntlet Regulator Shim Pak
    $18.50
    Umarex Gauntlet Regulator Shim Pak
    $18.50

    Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

    I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

    The shim kit contains:

    • 2 – #5 Shims.
    • 1 – #3 Shim.
    • 2 – #2 Shims.
      (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)

    To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
    To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
    The included two #2 shims are for minor adjustments if you have a finicky regulator.

    DETAILED LESSON/EXAMPLE:
    Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

    Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

    You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

    If you rapid fill, there is a good chance you will pop your burst disc.

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.