Flex Reg RTI Version & Tank

500cc CF Tank with Adjustable Reg

500cc CF Tank with Adjustable Reg

$310.00 – $350.00

Flex Reg designed and configured specifically for RTI PCP’S such as Prophet, Priest, & Priest 2
This Flex Reg comes paired with a brand-new Carbon fiber 4500PSI tank. The regulator is externally adjustable and has an effective adjustable range of 900PSI (62bar). 

Using the slider you select what the maximum output will be and because the regulator has the ability to adjust, you can reduce that maximum output pressure down as much as 900PSI (62bar). You can of course set the pressure anywhere along that 900PSI (62bar) range to suit your tuning requirements. The regulator will not have a pin or ball seal in the bonnet. The tank cannot be removed while under pressure and must be degassed.

Because of practical limitations, regulator max output will be +/- 50PSI (3.5bar) within the requested maximum output.

Comes with a spanner wrench for adjusting the output on the fly.

** This regulator is 5/8″-18UNF threaded and will not fit M18 threaded bottles. This configured Reg is not sold separately.

 

Clear
SKU: HPFLXREG-RTI-CMBO Categories: , , , , , Tags: , , , , ,

Description

 This Flex Regulator is specifically configured for use with the RTI Arms line of PCP's. The high side can handle 4500PSI (310BAR) and the output maximum can be 3100PSI (214BAR).
On the fly pressure adjustment wrench is included.

Use the slider to select the maximum output pressure and the minimum will be 900PSI (62BAR) lower than your selected maximum.

These units are custom adjusted and the output is built to your requirements.

While we try to hit the exact requested PSI as the max these units will always have a tolerance of +/- 50PSI (3.5BAR)

The below video shows the regulator in action. Thanks to OriOn – The Iguana Hunter
Please visit him at http://www.orioniguanahunter.com

Flex Reg is a Ninja Paintball Product and is not affiliated with RTI Arms.

 

 

Additional information

Weight 24 oz
Dimensions 14 × 2.25 × 2.25 in
Output pressure

1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100

Reviews

There are no reviews yet.

Be the first to review “Flex Reg RTI Version & Tank”

Related products

  • Gauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options
  • Sold out!
    $35.00
    Evanix Rainstorm II Baffle Stack
    $35.00

    Evanix Rainstorm II Baffle Stack

    Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
    The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
    The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

    Baffles should be pointing towards the breech

    <= Towards the breech —— Towards the Muzzle of shroud =>

    [░░] <░] <░░] <░░] <░] <░] <░░] <░░] CAP
    SO    SC     NC     NC    SC   SC    NC     NC

    SO = STAND OFF
    NC = NORMAL CONE
    SC = SHORT CONE

    Select options
  • HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00
    HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00

    Part fits either the original Gauntlet or the Gauntlet 2

    You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

    Air Stripper comes with o-ring and silicone grease for installation.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.