Buck Rail Suppressor
$35.00 – $40.00
Genuine Buck-Rail Product
- Designed to be compatible with 1/2-20 UNF male threads
- Stocked in 177/22 caliber
- 3d printed in Polycarbonate plastic in the US by a veteran-owned business
- Utilizes high quality EZ Lok steel inserts for extra durable threads
- 7 cone-shaped interior baffle design with large muzzle exit expansion chamber
- Dramatically reduces the report without diminishing accuracy or muzzle velocity
Additional information
Weight | 5 oz |
---|---|
Dimensions | 6.25 × 1.5 × 1.5 in |
SHAPE | FLAT, TAPERED |
You must be logged in to post a review.
You may also like…
-
Sale!
Built on the Umarex Notos
Haji-Notos Builder
725 to 1200Select optionsHaji-Notos Umarex Notos Custom Builder
The Notos is side lever repeater and one of the most affordable, accurate compact shooters on the market.
We transform an already awesome Notos that flys JSB Hades 15.89 gr @ 744 ft/s for 24 shots up to an amazing 850 ft/s with over 130 shots shooting the same Hades 15.89 gr lead pellets!
We consistently hit targets at 70-100 yards with a red dot!
Our Custom Builder Interface starts out with a brand new Umarex Notos .22 with the following modifications standard:
- Buck Rail Grip Adapter.
- Buffer Tube with Castle Nut.
- Stock suppressor removed and a 1/2 x 20 threaded adapter installed.
- Barrel transfer port increase and polish.
- Internal Valving and Port Modifications for Greater Power Production.
- Hammer spring upgrade.
- Trigger sear face polished and lubricated.
- Bottle to Barrel Support Band for Notos Rigidity.
- Power Plenum.
- Drop Block Regulator with dual gauges.
- Externally adjustable regulator.
- 4500 psi Carbon fiber bottle.
Options addons include:
- Suppressor
- Tactical Grip Choice
- Butt Stock Choice
- Folding Stock Adapter
- Expanded Magazine
- Red Dot Sights
- Fiber Optic Sights
- Bipod
You select the build options and we build it for you, all you need to do is shoot and enjoy! Be sure to scroll below your optional selections for more details
Related products
-
HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
Rated 5.00 out of 5$28.00Select optionsPart fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
-
Origin .22/.25
HP Strip Stak Pak for Origin
Rated 4.33 out of 5$47.00Select optionsNEW ENHANCED DESIGN
UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.
Strip Stak Pak for the Umarex Origin
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.Replacement Air Stripper 0-ring is 14mm x 1.5mm
-
Hatsan Bullmaster/Galatian with 1/2 x 20 UNF and thread adapter #A35
$40.00Select optionsPlease note that when you add a suppressor to this gun, it does not properly index the magazine. If you plan to single load and use a suppressor that’ll be fine. I would also recommend using a suppressor one caliber size up to reduce the chance of pellet clipping.
Reviews
There are no reviews yet.