-
$35.00Replacement end caps
Emperor/Ronin End Caps
$35.00Select optionsTHIS IS AN AIRGUN ONLY PART
Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.
-
$60.00V3 6.26 inch Extension
Emperor/Ronin Extender
$60.00Select optionsTHIS IS AN AIRGUN ONLY PART
Is the 10.5 inch Emperor v3 still too loud for you? If so add this 6.25 inch expansion chamber to the rear of the Emperor to make it even quieter. This increases the air volume that gets captured inside the suppressor. Works with the latest version of the Ronin as well. If it has the grooves in the front cap, it’s the latest model.
-
$99.00Tanto 1.22 x 5 inches
Tanto 1.22 x 5 inches
$99.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
-
$120.00DonnyFL FX Suppressor
FX/DonnyFL 1.36 x 5 inches
$120.00Select optionsTHIS IS AN AIRGUN ONLY PART
This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
-
$130.00Tatsu 1.6 x 4.25 inches
Tatsu 1.6 x 4.25 inches
$130.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
-
$150.00Sumo 1.6 x 6.25 inches
$150.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
-
Sold out!
$175.002 x 4.25 inches Fatboy 2.0
Fat Boy 2 x 4.25 inches
$175.00Read moreTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
2 x 4.25 inches Fatboy 2.0
Take the width of the Ronan or Emperor and the length of the Tatsu then mix in some super cool modularity components and you end up with the Fat Boy. In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 up to .30. Shooters who wanted something short yet effective, the Fatboy will surprise you.
Features:
- Compatible with .177 to .30 calibers
- Includes 3 interchangeable air strippers
- Redesigned 1/2 x 20 rear cap for easy gripping
- Can be used with the 6.25 inch extender for more hush power
- Measure 4.25 inches long by 2 inches in diameter
- Weighs only 6.7 oz
-
$185.00Shogun 1.6 x 8 inches
$185.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end. -
$185.00Ronin 2 x 6.25 inch
$185.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL out of high-quality 6061 Aluminum.
The Ronin is made to quiet the big dogs. The Ronin is best on a high power .25 caliber or a Gauntlet .30 Caliber.
We only stock the .22/.25 , .25/.30 caliber, and .357 in 1/2 x 20 UNF threaded versions.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The .357 is for shrouded barrel .30 calibers or direct barrel threaded .357 caliber PCPs
If you are looking to make the Ronin or Emperor really quiet, consider the 6.25″ Ronin extension chamber for extra stealthiness.
-
$239.99DonnyFL EMPEROR V3 Moderator
Emperor 2 x 11 inch
$239.99Select optionsTHIS IS AN AIRGUN ONLY PART
Introducing the largest DonnyFL suppressor catered to the big bore guns.
Overall length 11 inches and weighs in at 1 lb.
This thing is built like a tank to tame those power hungry shooters.
