This category is for noise suppression, lead collection devices, and moderators.
-
Sold out!
$35.00Artemis PP750 1/2 x 20 #A68
$35.00Read moreFits the Artemis PP750 PCP
This part is designed and manufactured by DonnyFL
-
Sale!
Original price was: $39.99.$35.00Current price is: $35.00.HP Stak Pak for Hatsan QE
Original price was: $39.99.$35.00Current price is: $35.00.Select optionsStak Pak for Hatsan QE shrouds (.357 & .457 Not Included)
Simply unscrew your shroud end cap, remove the two felt-covered stock baffle assemblies, remove the two aluminum stand-off chambers, and install the Hajimoto Stak Pak. No tools, no modifications, just a simple one-for-one swap! Some model Hatsans will use all the baffles others will need one less full-sized baffle, be sure to use both shorter baffles and leave out the full-sized one. If you need to leave one out, leave out the very first full-sized baffle and then arrange the stack as shown in the packaging.
A ten-piece kit that directly replaces the two hair curler style baffles that come inside any Hatsan that has a QE shroud system, excluding .357 & .457 models. The bundle has nine baffle chambers to help remove both noise and turbulence in the air stream. The baffle stack rides on a high tension compression spring allowing for a perfect fit for any Hatsan QE PCP, excluding .357 & .457 models.
The end result is a more laminar air stream which reduces projectile instability and substantially changes the sound of the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A24 adapter.
Installation video is listed in the DESCRIPTION section below
-
$35.00RTI Priest 2 Shroud Extender #A66
RTI Priest 2 Shroud Extender #A66
$35.00Select optionsIf your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so.
Features:
- 6061 T6 aluminum
- Knurled cap
- Matte black anodize
-
Sale!
$35.00 – $40.00Buck Rail Suppressor
BUCK-RAIL 1/2 X 20 SUPPRESSOR
$35.00 – $40.00Select options
Genuine Buck-Rail Product
- Designed to be compatible with 1/2-20 UNF male threads
- Stocked in 177/22 caliber
- 3d printed in Polycarbonate plastic in the US by a veteran-owned business
- Utilizes high quality EZ Lok steel inserts for extra durable threads
- 7 cone-shaped interior baffle design with large muzzle exit expansion chamber
- Dramatically reduces the report without diminishing accuracy or muzzle velocity
-
$40.00Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
$40.00Select optionsFits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s
This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.
If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.
This part is designed and manufactured by DonnyFL
-
$40.00Hatsan Bullmaster/Galatian with 1/2 x 20 UNF and thread adapter #A35
$40.00Select optionsPlease note that when you add a suppressor to this gun, it does not properly index the magazine. If you plan to single load and use a suppressor that’ll be fine. I would also recommend using a suppressor one caliber size up to reduce the chance of pellet clipping.
-
$40.00Hatsan Blitz M18X1 Adapter A117
$40.00Select optionsThis part is designed and manufactured by DonnyFL
This adapter allows you to screw on an airgun suppressor with M18x1 threads.
-
$40.001/2 x 20 UNF Adapter for Akela/Kratos
Benjamin Akela/Kratos 1/2 x 20 Adapter A8
$40.00Select optionsFits the Benjamin Akela and Kratos PCP’s
This part is designed and manufactured by DonnyFL
-
Sold out!
$40.00Akela/Kratos Strip Stak Pak
HP Strip Stak Pak for Akela/Kratos
$40.00Read moreINCLUDES NEW ENHANCED AIR STRIPPER DESIGN
Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.
Replacement Air Stripper 0-ring is 14mm x 1.5mm
-
$40.00Marauder, Armada and Fortitude
Benjamin 1/2 x 20 adapter #A7
$40.00Select optionsThis part is designed and manufactured by DonnyFL
-
$40.00Hammer Adapter
Umarex Hammer M18x1 Shroud Adapter A60
$40.00Select optionsThis adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector
This adapter does not fit on the Umarex Hammer Carbine.
-
$45.00Air Venturi Avenger Extender 1/2 x 20 Adapter #A70
$45.00Select optionsSpecifically for the AV Avenger
Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.
This part is designed and manufactured by DonnyFL
-
$45.00HP Strip Stak Pak for PP750
$45.00Select optionsStrip Stak Pak for the Artemis PP750
A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
Air Stripper comes with o-ring and silicone grease for installation. Not available for Canada
-
$45.00Umarex Origin 1/2 x 20 Adapter #A70
$45.00Select optionsSpecifically for the Umarex Origin
Not to be used with the Hajimoto Productions Strip Stak Pak (SSP) which is an Air stipper. Spring and Baffle Stack.
This version allows you to use a larger suppressor than the Tanto or KOI. Designed to slide over the barrel to keep the barrel centered with the adapter. This reduces the chance of pellet clipping and improves accuracy.
This part is designed and manufactured by DonnyFL
-
$45.00Beeman Underlever 1357 | 1358 Adapter #A86
$45.00Select optionsSpecifically for the Beeman 1357 / 1358
This adapter replaces the factory baffle allowing you to screw on a 1/2 x 20 airgun suppressor. You will need to remove the factory o’ring and put it on the new adapter.
This part is designed and manufactured by DonnyFL
-
$45.00Hatsan QE Big Bore .357/.457 M18x1 Adapter A54 #A54
$45.00Select optionsThis part is designed and manufactured by DonnyFL
-
$47.00Air Stripper, Tension Spring and Baffle Stack
HP Strip Stak Pak for Avenger
$47.00Select optionsUPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.
Strip Stak Pak for the Avenger
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.Replacement Air Stripper 0-ring is 14mm x 1.5mm
-
$47.00Origin .22/.25
HP Strip Stak Pak for Origin
$47.00Select optionsNEW ENHANCED DESIGN
UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.
Strip Stak Pak for the Umarex Origin
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.Replacement Air Stripper 0-ring is 14mm x 1.5mm
-
$50.00DonnyFL A115 JTS Adapter
JTS Airacuda Adapter #A115
$50.00Select optionsSpecifically for the Airacuda Standard or the Max in any Caliber (.22, .25, or .30)
Because this adapter was made to fit both the Standard and Max versions of the AiraCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not affect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design with this flexibility to overcome the challenges of this airgun’s shroud design so that moderators could be used.
Key Features:
- Compatibility: Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants.
- Premium Material: Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel.
This part is designed and manufactured by DonnyFL
-
$99.00Tanto 1.22 x 5 inches
Tanto 1.22 x 5 inches
$99.00Select optionsTHIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
-
$120.00DonnyFL FX Suppressor
FX/DonnyFL 1.36 x 5 inches
$120.00Select optionsTHIS IS AN AIRGUN ONLY PART
This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
