Umarex Parts/Mods

[wcas-search-form]
  • Tanto 1.22 x 5 inches
    $99.00

    Tanto 1.22 x 5 inches

    Tanto 1.22 x 5 inches
    $99.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Real 2 Stage Trigger for the GauntletReal 2 Stage Trigger for the Gauntlet
    $110.00

    Fits the G1, G2/G2SL or G30/G30SL

    Real 2 Stage Trigger for the Gauntlet
    $110.00

    Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2, G30, bolt or sidelever variants. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.

    • The Trigger Is Stainless Steel 17-4 Through Hardened
    • The Trigger Shoe Is Aluminum 6061-T6

    Please see the installation video below for more details.

    Super Tune Kit Users
    You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.

    Select options
  • G30 Barrel Shorten and RecrownG30 Barrel Shorten and Recrown
    $110.00

    For G30 and G30SL

    G30 Barrel Shorten and Recrown
    $110.00

    Service to reduce barrel length removing the barrel choke making the barrel better for slugs. Service

    The service executes the following:

    • Reduce barrel length by 2.5″ to remove the choke.
    • Recrown barrel.
    • We provide a new shorter replacement barrel shroud.

    This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

    Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
    This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.

    The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.

    Any outstanding balance must be paid before we ship out the service order.

    Select options
  • Axeon OpticsAxeon Optics
    $110.00

    MDSR1 Micro Dot Sight with Riser

    Axeon Optics
    $110.00

    Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

    Features:

    • 1X Magnification
    • 20mm Objective
    • Red Dot LED Reticle
    • .50 MOA Adjustment Size
    • Adjustable Windage and Elevation

    Select options
  • Notos Barrel ServiceNotos Barrel Service
    $110.00

    Barrel Service Notos

    Notos Barrel Service
    $110.00

    Notos Barrel Service

    This is what we do to our Haji-Notos Custom Builds. but you can have the same service performed on your Notos barrel as well. The Transfer port work increases the port and polishes the opening to allow greater airflow to produce more power more efficiently.

    You ship us your Notos Barrel and we execute the following:

    • Remove the fixed molded plastic suppressor (the suppressor is destroyed in the process).
    • Increase and polish the barrel transfer port.
    • Two new barrel o-rings are provided.
    • Clean up and polish the barrel crown.
    • 1/2 x 20 UNF Threaded Adapter Included.
    • Barrel Shroud End Cap and Barrel Guide Included.
    • Thoroughly clean and silicone barrel bore.

    Notos Barrel Removal

    Your Barrel is very easily removed by removing the 2.5mm button head screw on top of the Picatinny rail near the magazine opening. Once the 2.5mm screw is removed, there is a 2mm set screw below it that holds the barrel into the receiver block. Loosen the 2mm screw four revolutions and slide out the barrel.

    Shipping

    When you place the order for the above-described service, we will send you an order processing notification with a copy of your invoice. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your barrel for modification.

     

    Select options
  • FX/DonnyFL 1.36 x 5 inchesFX/DonnyFL 1.36 x 5 inches
    $120.00

    DonnyFL FX Suppressor

    FX/DonnyFL 1.36 x 5 inches
    $120.00

    THIS IS AN AIRGUN ONLY PART

    This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Tatsu 1.6 x 4.25 inchesTatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Gauntlet Short Shroud ComboGauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options
  • Gauntlet Tactical Combo BuilderGauntlet Tactical Combo Builder
    138 to 338

    Build your own Tactical Gauntlet Kit

    Gauntlet Tactical Combo Builder
    138 to 338

    Gauntlet Tactical Builder!

    If you just want the Tactical Grip Adapter Product Page, Click HERE

    You select the parts you wish to add to your existing Gauntlet 1, Gauntlet 2, or Gauntlet 30 to convert it to a lightweight Tactical tack driver.

    The builder starts with the Grip Adapter, fore grip, and included pistol grip.

    Installation video is listed below

    Select options
  • Sold out!
    Ninja Pro V3 Regulator 5/8" ThreadNinja Pro V3 Regulator 5/8″ Thread
    $146.00
    NEW MODEL

    Pro V3 for 3K and 4.5K Cylinders

    Ninja Pro V3 Regulator 5/8″ Thread
    $146.00

    The Hajimoto Ninja Paintball Pro V3 SHP in 5/8”-18UNF Thread with Stainless Steel Cap Threads

    Ninja's Pro V3 SHP with rotional bonnet.
A perfect replacement for the regulator found on the on the Gauntlet 2.
A complete regulator rebuild kit is included!

MADE IN THE USA!
Ninja regulator output pressures in increments of 100PSI.
Simply select your desired output pressure.
Output ranges from 1100PSI to 2400PSI.
All custom built pressure units will have a +/- 50 psi tolerance.
Dont confuse the this regulator with the lower pressure SLP versions out there, there is a difference.
    Select options
  • Sumo 1.6 x 6.25 inches
    $150.00
    Sumo 1.6 x 6.25 inches
    $150.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • HubenPower Zelos RegulatorHubenPower Zelos Regulator
    $150.00 – $400.00

    Umarex Zelos Regulator by HubenPower

    HubenPower Zelos Regulator
    $150.00 – $400.00

    • For Umarex Zelos
    • Can be installed in 300bar/4500psi tank，Provides pressure reduction function for Umarex Zelos’ 300bar tank, reducing the 300bar/4500psi tank pressure to below 250bar/3625psi
    • Installs directly without modification
    • Rotary joint design, easy to adjust the position of the pressure gauge and fill nipple.
    • Stainless steel material, strong and durable
    • The factory set output pressure is approximately 22~24Mpa (3190~3480psi). This is not the final shooting pressure, Do not adjust!. （Do not turn the bottom adjustment knob if you are not sure what you are doing.）
    • Umarex Zelos has an internal regulator. When you need to adjust the pressure for actual shooting, adjust the internal Zelos original regulator.
    • Please do not adjust the output pressure of this product to more than 250bar (3625 psi)
    • Comes equipped with a standard 8mm quick disconnect male foster fitting adapter for filling.
    • The regulator has a high air flow rate, lightweight, easy operation, and re-buildable.
    • Compatible with Air/CO2.
    Select options

Copyright All rights reserved Hajimoto Productions LLC 2025

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.