Umarex Parts/Mods

[wcas-search-form]
  • Sale!
    HP Barrel Band For Umarex Gauntlet
    $25.00 – $35.00

    Includes G1, G2, G30, G2SL, & G30SL variants

    HP Barrel Band For Umarex Gauntlet
    $25.00 – $35.00

    Available in the classic Picatinny rail version or the 15mm thick rail less version.

    Versions for Gauntlet 1, Gauntlet 2, Gauntlet 30 as well as the SL Versions!

    Select options
  • HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00
    HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00

    Part fits either the original Gauntlet or the Gauntlet 2

    You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

    Air Stripper comes with o-ring and silicone grease for installation.

    Select options
  • High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options
  • Notos Expanded Magazine
    $30.00

    Haji-Notos Mag 11 rounds

    Notos Expanded Magazine
    $30.00
    Introducing the Haji-Notos 11 Shot Expanded Magazine!

    This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.

    Please note that our design loads from the right.

    Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.

    The Haji-Notos magazine works with a red-dot or optic but does not work with Umarex fixed fiber optic sights.

    LOADING THE NOTOS MAGAZINE

    Select options
  • HP Gauntlet, Mini Mag
    $33.00

    Gauntlet 1 or Gauntlet 2 Mini Magazine

    HP Gauntlet, Mini Mag
    $33.00
    Introducing the HP Mini Magazine.

    The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Umarex Gauntlet 1 or 2 in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″)

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .25 = 11 shots
    • The magazine height is 40.90mm (1.610″ )

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    For Gauntlet .177, .22, .25 and .30 Calibers

    Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

    Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design or the new magnetic lidded version.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
    • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
    • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
    • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • HP Avenger Exp Mag
    $35.00 – $40.00

    Fits both Avenger and Origin

    HP Avenger Exp Mag
    $35.00 – $40.00

    New redesigned HP 2.0 magnetic lid design is available for the .22 and .25 Caliber!

    Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177,  .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • New magnetic lid design available for .22.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of all calibers is 50.25MM (1.978″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • $35.00

    Replacement end caps

    Emperor/Ronin End Caps
    $35.00

    THIS IS AN AIRGUN ONLY PART

    Interchangeable rear endcaps for the latest model of Ronin and Emperor. Works with models with the grooves in the front cap.

    Select options
  • Umarex Gauntlet 1/2 x 20 adapter #A23
    $40.00

    For the Gauntlet 1 or 2

    Umarex Gauntlet 1/2 x 20 adapter #A23
    $40.00

    This part is designed and manufactured by DonnyFL

    Select options
  • Sold out!
    Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00
    Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00

    Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

    This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

    If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

    This part is designed and manufactured by DonnyFL

    Read more
  • Sold out!
    HP Strip Stak Pak for Akela/Kratos
    $40.00

    Akela/Kratos Strip Stak Pak

    HP Strip Stak Pak for Akela/Kratos
    $40.00

    INCLUDES NEW ENHANCED AIR STRIPPER DESIGN

    Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
    A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
    The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.     

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Read more
  • $40.00

    Hammer Adapter

    Umarex Hammer M18x1 Shroud Adapter A60
    $40.00

    This adapter replaces the factory shroud baffle and has M18x1 threads. Comes with thread protector

    This adapter does not fit on the Umarex Hammer Carbine.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.