Parts

  • $95.00
    Gauntlet O-ring service
    $95.00

    This service tears the entire air rifle down, cleans and inspects for part wear, and replaces all the o-rings in your Gauntlet. Whether the o-rings are leaking from age or wear, whether the rifle is actually leaking or not, all o-rings are replaced. The rifle undergoes an incoming inspection which captures the functional and physical condition of the air rifle. This information is presented in a report which must be reviewed and approved prior to any work can begin.
    The o- rings that are replaced are:

      • (2) Regulator to gun o-rings.
      • (1) Stock end cap o-ring.
      • (1) Stock air stripper o-ring.
      • (1) Barrel to shroud support collar at breach block o-ring.
      • (2) Bottle block to pressure tube o-rings.
      • (1) Valve body o-ring.
      • (2) Pellet probe o-rings.
      • (3) Barrel to breach block o-rings.

    The action is verified and lubricated prior to returning the rifle. The rifle undergoes a pressure test for 24 hours to guarantee there are no pressure losses.

     

    Select options
  • $99.00

    Tanto 1.22 x 5 inches

    Tanto 1.22 x 5 inches
    $99.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • Sale!
    Original price was: $130.00.Current price is: $100.00.

    Buck Rail

    Avenger Grip Adapter V3
    Original price was: $130.00.Current price is: $100.00.
    Select options
  • Real 2 Stage Trigger for the Gauntlet
    $110.00

    Fits the G1, G2 or G30

    Real 2 Stage Trigger for the Gauntlet
    $110.00

    Full-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.

    • The Trigger Is Stainless Steel 17-4 Through Hardened
    • The Trigger Shoe Is Aluminum 6061-T6

    Please see the installation video below for more details.

    Super Tune Kit Users
    You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger.

    Select options
  • G30 Barrel Shorten and Recrown
    $110.00

    For G30 and G30SL

    G30 Barrel Shorten and Recrown
    $110.00

    Service to reduce barrel length removing the barrel choke making the barrel better for slugs. Service

    The service executes the following:

    • Reduce barrel length by 2.5″ to remove the choke.
    • Recrown barrel.
    • We provide a new shorter replacement barrel shroud.

    This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.

    Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
    This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.

    The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.

    Any outstanding balance must be paid before we ship out the service order.

    Select options
  • PCP Air Compressor Filter 4500psi Oil Water Separator
    $110.00 – $175.00
    PCP Air Compressor Filter 4500psi Oil Water Separator
    $110.00 – $175.00

    A quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.

    Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.

    Made from high-quality aircraft aluminum and is rated for safe use.

    Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.

     

    Select options
  • Axeon Optics
    $110.00

    MDSR1 Micro Dot Sight with Riser

    Axeon Optics
    $110.00

    Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

    Features:

    • 1X Magnification
    • 20mm Objective
    • Red Dot LED Reticle
    • .50 MOA Adjustment Size
    • Adjustable Windage and Elevation

    Select options
  • Notos Barrel Service
    $110.00

    Barrel Service Notos

    Notos Barrel Service
    $110.00

    Notos Barrel Service

    This is what we do to our Haji-Notos Custom Builds. but you can have the same service performed on your Notos barrel as well. The Transfer port work increases the port and polishes the opening to allow greater airflow to produce more power more efficiently.

    You ship us your Notos Barrel and we execute the following:

    • Remove the fixed molded plastic suppressor (the suppressor is destroyed in the process).
    • Increase and polish the barrel transfer port.
    • Two new barrel o-rings are provided.
    • Clean up and polish the barrel crown.
    • 1/2 x 20 UNF Threaded Adapter Included.
    • Barrel Shroud End Cap and Barrel Guide Included.
    • Thoroughly clean and silicone barrel bore.

    Notos Barrel Removal

    Your Barrel is very easily removed by removing the 2.5mm button head screw on top of the Picatinny rail near the magazine opening. Once the 2.5mm screw is removed, there is a 2mm set screw below it that holds the barrel into the receiver block. Loosen the 2mm screw four revolutions and slide out the barrel.

    Shipping

    When you place the order for the above-described service, we will send you an order processing notification with a copy of your invoice. Shortly after that, you will receive a detailed notification with the shipping information for you to ship us your barrel for modification.

     

    Select options
  • Sale!
    Doux Avenger Bottle Adapter
    $115.00 – $424.00

    With or Without Cylinder

    Doux Avenger Bottle Adapter
    $115.00 – $424.00

    Convert your Air Venturi Avenger into a bottle PCP!

    • Adapter Threaded for M18 x 1.5 Air Cylinder.
    • Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
    • All Stainless Steel Construction.

    Made in South Africa

     

    Installation video below:

    Select options
  • FX/DonnyFL 1.36 x 5 inches
    $120.00

    DonnyFL FX Suppressor

    FX/DonnyFL 1.36 x 5 inches
    $120.00

    THIS IS AN AIRGUN ONLY PART

    This is a custom size that comes with FX airguns if you decide to upgrade the suppressor or if you are looking to add a suppressor that is right in between the Tanto and Tatsu. The FX/DonnyFL is the same length as the Tanto but slightly larger in diameter, comparable to the FX factory suppressor. This weighs around 4.7 ounces. Comes with a protective red tube for easy transport and storage.

    Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options
  • TacVenger DIY KIT CUSTOM
    From $125.00

    This Builder Starts With the Tactical Adapter

    TacVenger DIY KIT CUSTOM
    From $125.00

    This is where you can build your own TacVenger Kit to install on your existing Avenger.

    Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.

    The Kit Starts with the Buck Rail Tactical. We are no longer using the AE Swede Chassis.

    then you simply add the items you want in your kit and you are all set!

    The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.

    Select options
  • Tatsu 1.6 x 4.25 inches
    $130.00

    Tatsu 1.6 x 4.25 inches

    Tatsu 1.6 x 4.25 inches
    $130.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL

    Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

    The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.