Parts - Hajimoto Productions LLC

$47.00
Origin .22/.25
HP Strip Stak Pak for Origin
Rated 4.33 out of 5
$47.00

NEW ENHANCED DESIGN

UPDATE: The newer Origins have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.

Strip Stak Pak for the Umarex Origin
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. I strongly recommend that you watch my installation video below.

Replacement Air Stripper 0-ring is 14mm x 1.5mm

Select options
$49.00
Needed to install a bottle
Avenger Bull Pup Primary Adapter
$49.00

Here is our primary adapter that allows the installation of the Doux Tech on the Avenger Bull Pup PCP.
The primary adapter replaces the lower pressure tube adapter allowing the bottle adapter to be installed on the airgun.

You will transfer the o-ring from the Avengers pressure tube to the Primary Adapter.

Select options
Sale!
Original price was: $65.00.Current price is: $49.00.
AR Stock Folder
Side Folding Stock Adapter
Original price was: $65.00.Current price is: $49.00.
A basic affordable stock folding adapter that allows your PCP to take up 30% less space in your bag or back pak. This basic folder is an excellent choice for anyone looking to improve the versatility and portability of their tactical style PCP.

FEATURES
- Aerospace grade aluminum. Matte Black Anodized finish.
- Modifiable for pass-through for hammer adjusters.
- Designed to fold to the left but can be made to fold right as well.
- Locks in the open and closed positions*.
- Compatible with AR15 and AR308 extension tubes.
- Works perfectly for the HajiNotos and Tactical Gauntlet Kits.
(* The hinge does have a certain amount of play when locked in either position.)
Select options
Sale!
Original price was: $60.00.Current price is: $49.00.
M8, M10, and 1/8″ Threaded Digital Gauge
28mm Digital Pressure Gauge
Original price was: $60.00.Current price is: $49.00.
- 28MM Diameter
- M8, M10, or 1/8″ Threaded versions available
- Display in PSI
- Auto Shut off in 30 secs
- Digital Display 1% Accuracy
- Black Rubber Protective Sleeve
- Working pressure 0-4500psi
- Weight 32g
- Gauge body is made from high-grade brass
Select options
$50.00 – $60.00
Gauntlet Bottle Shroud Mod
$50.00 – $60.00

This service is to modify the bottle shroud to allow the proper fit for the Power Flex Combo carbon fiber tank and flex regulator:

The service can be added to an existing tune/build or a stand-alone ship in service. If you are shipping me your forestock or bottle shroud be sure to keep the screws, star washers, and sling stud as I will not need those. If you have any type of rail installed for a bipod it needs to be removed prior to shipping me the bottle shroud.

If you select the stand-alone ship service, shipping instructions will follow which detail the packaging and address to ship to.

Cerakote or color change is not included photo is from the 2021 Hajimoto Edition for illustration purposes.

Select options
$50.00
DonnyFL A115 JTS Adapter
JTS Airacuda Adapter #A115
$50.00
Specifically for the Airacuda Standard or the Max in any Caliber (.22, .25, or .30)

Because this adapter was made to fit both the Standard and Max versions of the AiraCuda, and because of the variations between individual rifles, you may find that one or two threads remain exposed when you snug the adapter in place. This is normal, and will not affect the performance of the rifle. In fact, our testing has revealed that a longer or heavier moderator can be used with less risk of clipping as compared to the endcap-only style adapter. It was necessary to design with this flexibility to overcome the challenges of this airgun’s shroud design so that moderators could be used.

Key Features:
- Compatibility: Perfect fit for JTS Aircuda and Aircuda MAX rifles. Suitable for .22, .25, .30 caliber variants.
- Premium Material: Made with high-grade 6061 aluminum, ensuring durability and a lightweight feel.
This part is designed and manufactured by DonnyFL
Select options
$50.00
For G30, G30SL or Any Gen Gauntlet
Gauntlet Barrel Chambering Correction
$50.00

Service to correct the Gauntlet series of PCP’s. Calibers include .177, .22, 25, 30, or the 30SL, hard chambering of slugs issues.

Select options
$50.00
For all G barrels in all calibers
G Barrel Transfer Port Work
$50.00

Service to improve the barrels transfer port by enlarging and polishing the inlet. All calibers benefit from this service when trying to achieve maximum power and efficiency from your build.

Select options
$55.00
Trigger work
$55.00

The service can be added to an existing tune/build or a stand-alone ship in service. If you are shipping me your trigger group, you simply decock and degas the Gauntlet, remove it from the stock, and remove the two fasteners that hold the group to the bottom of the pressure tube.

If you elect the stand-alone ship service, shipping instructions will follow which detail the packaging and address to ship to.

Select options
$55.00
11.4cc plenum expansion for Avenger
Doux – Avenger Power Plenum
$55.00
AVENGER/LEVIATHAN POWER PLENUM:
- SIZE: 11.4cc
- STACKABLE
- BLACK ANODIZED WITH MATT BLACK GUN COATING
- TYPICAL PERFORMANCE INCREASE IS AROUND 20FT/S WITH NO OTHER MODIFICATIONS.
THIS PLENUM IS NOT DESIGNED TO NOT FIT THE BULL PUP VERSION

INSTALLATION CAN BE MADE USING TYPICAL SNAP RING PLIERS

MADE IN SOUTH AFRICA

Installation video below
Select options
$59.95 – $69.95
Microbore 4500PSI Extension
Ninja Microbore Fill Whip
$59.95 – $69.95
- 30% Lighter and Smaller than standard HPA hoses
- Extremely flexible 30 or 46 inch hose
- 4500 PSI working pressure
- Works with any HPA or CO2 system
- Made in USA
Select options
$59.99
Clamp with Pic rail
Saber Tactical 55mm Clamp
$59.99

If you’re uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.

Fits perfectly for Umarex Gauntlets Stock tanks.

This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.

Select options