Parts

  • Ronin 2 x 6.25 inchRonin 2 x 6.25 inch
    $185.00
    Ronin 2 x 6.25 inch
    $185.00

    THIS IS AN AIRGUN ONLY PART

    This part is designed and manufactured by DonnyFL out of high-quality 6061 Aluminum.

    The Ronin is made to quiet the big dogs. The Ronin is best on a high power .25 caliber or a Gauntlet .30 Caliber.

    We only stock the .22/.25 , .25/.30 caliber, and .357 in 1/2 x 20 UNF threaded versions.

    If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
    The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
    The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
    The .357 is for shrouded barrel .30 calibers or direct barrel threaded .357 caliber PCPs

    If you are looking to make the Ronin or Emperor really quiet, consider the 6.25″ Ronin extension chamber for extra stealthiness.

    Select options
  • Sale!
    Gauntlet Sidelever Install
    Original price was: $220.00.Current price is: $195.00.

    Installation of our Sidelever on G2 or G1

    Gauntlet Sidelever Install
    Original price was: $220.00.Current price is: $195.00.

    This service is for the installation of our sidelever cocking system installed in your action. The Sidelever is no longer being offered for .30 caliber variants.

    Our side lever system eliminates one of the main gripes folks have with the Umarex Gauntlet and that is COCKING EFFORT!

    There is no comparison in cocking effort when you apply the mechanical advantage a sidelever gives you. The installation is a non-destructive installation and can be reversed without any compromise to the airgun’s action or stock.

    The sidelever system is a CNC milled 6061 Aluminum part which is hard anodized for a great match to the existing Gauntlet finish. The cocking vertical handle is an additive manufactured carbon fiber & ABS part that can be swapped out by you if you wanted to use a custom handle from wood or other material.

    Our sidelever cocking system does require that you hold the handle back to swap mags but there is no need to hold back if you single load using the single shot tray.

    One of the most common questions we get is “Can I just buy the parts and install them myself?” and the short answer is, no you cannot. For the reasons why, please read the ARTICLE we published in our blog in February 2023 on this topic.

    See below for detailed shipping instructions and preparation videos.

     

    Select options
  • Saber Tactical Tank ValveSaber Tactical Tank Valve
    $200.00

    Tank Valve ST0031

    Saber Tactical Tank Valve
    $200.00

    Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze

    Select options
  • 370cc/.37L/22.5ci Carbon Fiber 4500PSI Tank370cc/.37L/22.5ci Carbon Fiber 4500PSI Tank
    $220.00

    370cc/.37L CE 5/8″ Threaded

    370cc/.37L/22.5ci Carbon Fiber 4500PSI Tank
    $220.00

    Introducing a Hajimoto Productions Exclusive offer!

    • Shaves almost a full pound of weight off your G2 or G30.
    • 22.5ci/370cc/.37L CE Certified CF Tank.
    • 5/8”-18UNF Threaded so Stock Gauntlet Regulators will thread directly to this bottle.

      Installs on the Gauntlet 2 with minor tank shroud modifications, and the bottle shroud slides right over the carbon fiber cylinder.  



    The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This is a 22.5ci / 370cc carbon fiber 4500psi max fill cylinder.

    The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

    Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.

     

    Select options
  • Sale!
    0.50L Carbon Fiber Tank 4500PSI (M18)0.50L Carbon Fiber Tank 4500PSI (M18)
    Price range: $230.00 through $240.00

    0.5L/500cc CE Certified CF Tank (M18)

    0.50L Carbon Fiber Tank 4500PSI (M18)
    Price range: $230.00 through $240.00

    Half a liter of air, right here!

    0.5L/500cc CE Certified CF Tank
    Tank weight is 19.4 oz
    Perfect fit for your custom build.

    M18x1.5 Threaded

    This is the same bottle we use on the TacVenger builds we offer.

     

    Select options
  • Sale!
    0.50L Carbon Fiber Tank 4500PSI (5/8")
    Price range: $230.00 through $240.00

    0.5L/500cc CE Certified CF Tank (5/8″)

    0.50L Carbon Fiber Tank 4500PSI (5/8″)
    Price range: $230.00 through $240.00

    Half a liter of air, right here!

    0.5L/500cc CE Certified CF Tank
    Tank weight is 19.4 oz


    5/8″ – 18UNF Threaded

     

    Select options
  • Emperor 2 x 11 inch
    $239.99

    DonnyFL EMPEROR V3 Moderator

    Emperor 2 x 11 inch
    $239.99

    THIS IS AN AIRGUN ONLY PART

     

    Introducing the largest DonnyFL suppressor catered to the big bore guns.

    Overall length 11 inches and weighs in at 1 lb.

    This thing is built like a tank to tame those power hungry shooters.

    Select options
  • Air Marksman Carbon Fiber TanksAir Marksman Carbon Fiber Tanks
    Price range: $249.99 through $309.99

    300cc, 580cc or 700cc Bottles

    Air Marksman Carbon Fiber Tanks
    Price range: $249.99 through $309.99

    • M18x1.5 neck thread.
    • 300cc (.3 Liter), 580cc (.58 Liter), or 700cc (.7 Liter)
    • 300 bar fill pressure (4351 PSI)
    • Bottle only no regulator or adapters included.

    Select options
  • Huben Power on a Carbon Fiber BottleHuben Power on a Carbon Fiber Bottle
    Price range: $255.00 through $405.00

    Black Hawk Pro on a 300, 360, 500 or 700cc CF Tank

    Huben Power on a Carbon Fiber Bottle
    Price range: $255.00 through $405.00

    Extra light Air Capacity for the Umarex Gauntlet 2/G30/G30SL !
    Available in 300cc, 360cc, 500cc or 700cc PSI Carbon Fiber Bottle in two finishes.
    The tanks are 4500PSI pressure vessels and are much lighter than steel or aluminum tanks.

    Hajimoto is bringing sexy back! Doesn’t that carbon fiber look awesome on there!

    FEATURES

    • Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
    • Stream line and slim structural design
    • Thread: Bottle = M18*1.5 and PCP = G1/2-14
    • Max up to 4500psi high pressure gauge input.
    • Regulating output pressure range 500psi~3600psi (End user is responsible for any pressures beyond the PCP’s stated Maximum)
    • Comes with standard 8mm quick disconnect male foster fitting adapter for filling.
    • Dust caps may be green or black randomly.
    • Tank optional finish gloss or matte.
    • The regulator has a high air flow rate, is light weight, easily operational, re-buildable, designed for use with HPA/CO2.

    Includes the Huben Power Black Hawk Pro regulator.
    The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure.  This 4500 PSI carbon fiber bottle is 500 or 700cc and is absolutely gorgeous on the Gauntlet.

    Select options
  • Sale!
    Haji-Notos Power Plant ComboHaji-Notos Power Plant Combo
    Price range: $265.00 through $365.00

    Huben Power Dream-Notos TK with 0.30L, 0.36L, 0.50L CF Tank

    Haji-Notos Power Plant Combo
    Price range: $265.00 through $365.00

     

    Genuine Huben Power Dream-Notos TK mounted on a .30L (300cc) 0.36L (360CC) or .50L (500cc)

    A complete Haji-Notos Power Plant Combo. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

    FEATURES

    • Includes 0.30L, 0.36l, or 0.50L 4500psi Carbon Fiber Bottle in Gloss or Matte Black.
    • Optional Barrel Band support to provide structural support for the Power Plant.
    • Optional Barrel fitment for Stock with OEM suppressor, Hajimoto Notos Modified, or FX Barrel
    • Extremely stable externally adjustable regulator Output 500psi~3600psi
    • Provides over 130 shots.
    • Ultra-stable output pressure
    • Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
    • Standard 8mm quick disconnect male Foster fitting adapter for filling.
    • Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
    • Power increase on the fly, but power decrease requires degassing the plenum.

    See details below

    Select options
  • Sold out!
    Ninja Reg on 18ci Carbon Fiber BottleNinja Reg on 18ci Carbon Fiber Bottle
    $274.00

    4.5K PSI Ninja Reg on a 18ci/295cc/.29L CE Certified CF Tank

    Ninja Reg on 18ci Carbon Fiber Bottle
    $274.00

    Direct replacement with no modifications required for the Umarex Gauntlet 2 & G30/G30SL!
    18ci/295cc/.29L 4500 PSI Carbon Fiber Bottle

    Hajimoto is bringing sexy back! Doesn’t that carbon fiber look awesome on there!

    Includes Ninja’s HP regulator.
    The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure.  This 4500 PSI carbon fiber bottle is 18ci and is absolutely gorgeous on the Gauntlet 1 or Gauntlet 2.

    The Gauntlet 1 will need to increase its tank shroud inside diameter to allow the foregrip/tank cover to side over this carbon fiber tank.

    Operating Pressure Recommendations

    Gauntlet 1:
     .177/.22 Stock operating pressure 1100PSI Max Recommended pressure is 1400PSI.
    .25 Caliber Stock operating pressure 1900PSI Max Recommended pressure is 2100PSI.


    Gauntlet 2:
     .22 Stock operating pressure 1900PSI Max Recommended pressure is 2100PSI.
    .25 Caliber Stock operating pressure 2100PSI Max Recommended pressure is 2300PSI.

    Gauntlet 30/30SL:
      Stock operating pressure 2800PSI Max Recommended pressure is 3100PSI.

    NINJA REGULATORS ARE MADE IN THE USA!

    Select options
  • Sale!
    0.70L Carbon Fiber Tank 4500PSI
    Original price was: $390.00.Current price is: $280.00.

    0.7L/700cc CE Certified CF Tank

    0.70L Carbon Fiber Tank 4500PSI
    Original price was: $390.00.Current price is: $280.00.

    0.7L/700cc CE Certified CF Tank
    Perfect fit for your custom build.

    M18x1.5 Threaded

    If you plan to use this bottle with a Gauntlet, you must remove and leave removed, the tank shroud. This bottle cannot use the flex reg as it is threaded M18.

    Consider our barrel bands for the 500cc and 700cc bottles on the Gauntlet found HERE

     

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2025

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.