Parts

Sale!
Original price was: $175.00.Current price is: $160.00.
The Haji-Notos Power Plant
Huben Power – Dream-Notos TK
Original price was: $175.00.Current price is: $160.00.
Genuine Huben Power Regulator with Power Plenum

This is the Power Plant that we use for our Haji-Notos build. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

FEATURES
- Externally adjustable Regulator Output 500psi~3600psi
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Tank Threads : M18*1.5
- Power Increase on the fly but decrease requires degassing the plenum.
** BE SURE TO READ DETAILS BELOW **
Select options
$173.00 – $175.00
NEW MODEL
PRO V3 ON 22ci 3K Cylinder
Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
$173.00 – $175.00

Includes Ninja’s Pro V3 regulator with Stainless Steel Threaded 36o° rotational Cap.
Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

This is an aluminum 22ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.

PRESSURE – STOCK AND RECOMMENDED
Stock .177/.22 | 22ci/3000/1100PSI Regulator
Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI Regulator

Stock .25 | 22ci/3000/1900PSI Regulator
Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 Regulator

This setup is for the original Umarex Gauntlet 1 with the Black stock.
A complete regulator rebuild kit is included!

NINJA REGULATORS ARE MADE IN THE USA!

Select options
Sold out!
$175.00
2 x 4.25 inches Fatboy 2.0
Fat Boy 2 x 4.25 inches
$175.00
THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

2 x 4.25 inches Fatboy 2.0

Take the width of the Ronan or Emperor and the length of the Tatsu then mix in some super cool modularity components and you end up with the Fat Boy. In the 2.0 version, we gave this Campbell soup can a face lift. New outer shell design along with interchangeable calibers from .177 up to .30. Shooters who wanted something short yet effective, the Fatboy will surprise you.

Features:
Compatible with .177 to .30 calibers

Includes 3 interchangeable air strippers

Redesigned 1/2 x 20 rear cap for easy gripping

Can be used with the 6.25 inch extender for more hush power

Measure 4.25 inches long by 2 inches in diameter

Weighs only 6.7 oz
Read more
$179.00
Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
$179.00

Introducing a Hajimoto Productions Exclusive offer!

13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSI

Installs on the Gauntlet with minor tank shroud modifications.

A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
$185.00
Shogun 1.6 x 8 inches
$185.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

Select options
$185.00
Ronin 2 x 6.25 inch
Rated 5.00 out of 5
$185.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL out of high-quality 6061 Aluminum.

The Ronin is made to quiet the big dogs. The Ronin is best on a high power .25 caliber or a Gauntlet .30 Caliber.

We only stock the .22/.25 , .25/.30 caliber, and .357 in 1/2 x 20 UNF threaded versions.

If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The .357 is for shrouded barrel .30 calibers or direct barrel threaded .357 caliber PCPs

If you are looking to make the Ronin or Emperor really quiet, consider the 6.25″ Ronin extension chamber for extra stealthiness.

Select options
Sale!
Original price was: $220.00.Current price is: $195.00.
Installation of our Sidelever on G2 or G1
Gauntlet Sidelever Install
Original price was: $220.00.Current price is: $195.00.

This service is for the installation of our sidelever cocking system installed in your action. The Sidelever is no longer being offered for .30 caliber variants.

Our side lever system eliminates one of the main gripes folks have with the Umarex Gauntlet and that is COCKING EFFORT!

There is no comparison in cocking effort when you apply the mechanical advantage a sidelever gives you. The installation is a non-destructive installation and can be reversed without any compromise to the airgun’s action or stock.

The sidelever system is a CNC milled 6061 Aluminum part which is hard anodized for a great match to the existing Gauntlet finish. The cocking vertical handle is an additive manufactured carbon fiber & ABS part that can be swapped out by you if you wanted to use a custom handle from wood or other material.

Our sidelever cocking system does require that you hold the handle back to swap mags but there is no need to hold back if you single load using the single shot tray.

One of the most common questions we get is “Can I just buy the parts and install them myself?” and the short answer is, no you cannot. For the reasons why, please read the ARTICLE we published in our blog in February 2023 on this topic.

See below for detailed shipping instructions and preparation videos.

Select options
$200.00
Tank Valve ST0031
Saber Tactical Tank Valve
$200.00

Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze

Select options
$200.00
370cc/.37L CE 5/8″ Threaded
22.5ci Carbon Fiber 4500PSI Tank
$200.00
Introducing a Hajimoto Productions Exclusive offer!
- Shaves a pound of weight off your G2 or G30.
- 22.5ci/370cc/.37L CE Certified CF Tank.
- 5/8”-18UNF Threaded so Stock Gauntlet Regulators will thread directly to this bottle.
  
  Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder.
The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This is a 22.5ci / 370cc carbon fiber 4500psi max fill cylinder.

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.
Select options
$205.00
Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
$205.00

Introducing a Hajimoto Productions Exclusive offer!

22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSI

If you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE

Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.

A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
Sale!
Original price was: $260.00.Current price is: $220.00.
0.5L/500cc CE Certified CF Tank
0.50L Carbon Fiber Tank 4500PSI
Original price was: $260.00.Current price is: $220.00.

Half a liter of air, right here!

0.5L/500cc CE Certified CF Tank
Perfect fit for your custom build.

M18x1.5 Threaded

This is the same bottle we use on the TacVenger builds we offer.

Select options
$239.99
DonnyFL EMPEROR V3 Moderator
Emperor 2 x 11 inch
$239.99

THIS IS AN AIRGUN ONLY PART

Introducing the largest DonnyFL suppressor catered to the big bore guns.

Overall length 11 inches and weighs in at 1 lb.

This thing is built like a tank to tame those power hungry shooters.

Select options

2 x 4.25 inches Fatboy 2.0