Gauntlet 2

  • G30/G30SL STOCK PELLET PROBE O-RINGSG30/G30SL STOCK PELLET PROBE O-RINGS
    $7.50

    PELLET PROBE ORINGS FOR G30

    G30/G30SL STOCK PELLET PROBE O-RINGS
    $7.50

    Stock style replacement o-rings for the Umarex Gauntlet G30 and G30SL.

    Kit contains six (6) replacement o-rings

    Select options
  • Sale!
    QD PORT SLING SWIVEL AND BASEQD PORT SLING SWIVEL AND BASE
    Original price was: $14.99.Current price is: $9.99.
    QD PORT SLING SWIVEL AND BASE
    Original price was: $14.99.Current price is: $9.99.

    QD Sling Mount Sling Swivel Quick Detach Release Push Button QD Sling Swivels for MLOK SLOTS.

    Quick Disconnect 

    Select options
  • HP Baffle Stack For Umarex Gauntlet
    $20.00
    HP Baffle Stack For Umarex Gauntlet
    $20.00

    Part fits either the original Gauntlet or the Gauntlet 2

    THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

    Select options
  • Umarex 6K GaugeUmarex 6K Gauge
    $21.95

    UX 6000PSI GAUGE

    Umarex 6K Gauge
    $21.95

    This is a Replacement 6K Pressure Gauge for the made in Taiwan Gauntlet Regulator.

    This gauge will not fit the Ninja Paintball Version

    Select options
  • Magpul Beaver Tail Grip
    $23.00

    AR Pistol Grip

    Magpul Beaver Tail Grip
    $23.00

    A2 Pistol Grip – Features a textured surface for a secure and non-slip grip, even in wet or slippery conditions. Provides a comfortable hold, reducing fatigue and ensuring a more accurate shot placement.

    Material: Dupont Zytel 30% glass filled nylon

    Made in the USA

    Select options
  • HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00
    HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
    $28.00

    Part fits either the original Gauntlet or the Gauntlet 2

    You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.

    Air Stripper comes with o-ring and silicone grease for installation.

    Select options
  • High Travel Valve Stop For Umarex Gauntlet 1 or 2High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options
  • Hajimoto's Gauntlet Expanded MagazineHajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    For Gauntlet .177, .22, .25 and .30 Calibers

    Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

    Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design or the new magnetic lidded version.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
    • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
    • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
    • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Saber Tactical 55mm ClampSaber Tactical 55mm Clamp
    $59.99

    Clamp with Pic rail

    Saber Tactical 55mm Clamp
    $59.99

    If you’re uneasy about drilling into your factory gun stock, this 52mm bottle clamp will easily attach to your 52mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.

    Fits perfectly for Umarex Gauntlets Stock tanks.

    This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.

    Select options
  • Sale!
    MAGPUL CTR® Carbine Stock – Mil-SpecMAGPUL CTR® Carbine Stock – Mil-Spec
    Original price was: $70.00.Current price is: $64.00.

    MAGPUL CTR® Carbine Stock – Mil-Spec

    MAGPUL CTR® Carbine Stock – Mil-Spec
    Original price was: $70.00.Current price is: $64.00.

    The Magpul CTR (Compact/Type Restricted) – Mil-Spec model is a drop-in replacement buttstock for AR15 / M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

    The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec model includes a standard 0.3″ thick rubber butt-pad, which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

    Select options
  • Gauntlet Short Shroud ComboGauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options
  • Gauntlet Tactical Combo BuilderGauntlet Tactical Combo Builder
    138 to 338

    Build your own Tactical Gauntlet Kit

    Gauntlet Tactical Combo Builder
    138 to 338

    Gauntlet Tactical Builder!

    If you just want the Tactical Grip Adapter Product Page Click HERE

    PLEASE USE THE NOTES SECTION BELOW TO TELL US YOUR GAUNTLET VERSION AND CALIBER.
    ALSO IF YOU WANT A LOGO VERSION OR NO LOGO VERSION OF THE CHASSIS

    You select the parts you want to addon to your existing Gauntlet 1, Gauntlet 2, or Gauntlet 30 to convert it to a lightweight Tactical tack driver.

    The builder starts with the Grip Adapter, fore grip and included pistol grip.

    Installation video is listed below

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2025

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.