Eagle Vision Cam products like lenses and scope cam.
-
Sold out!
$14.00Replacement eye cup for SC-40
Eaglevision Rubber Eye Piece
$14.00Read moreZero Coil Rubber Eye-Relief Tube comes with ring size M42 X 0.6 threads.
-
$20.00 – $27.00Eaglevision
Eaglevision Tube Adapter Rings
$20.00 – $27.00Select optionsThis is high quality 30mm to 1″ or 34mm to 30mm scope tube adaptors, made of aluminium.
Designed To Works With All Eaglevision Scope Mounts.
-
Sold out!
$25.00One Pair Dovetail to Picatinny Adapters
Eaglevision Picatinny to Dovetail
$25.00Read moreThese are 26mm long by 11mm Dovetail to Picatinny Adaptors
Made from aluminumPackage includes:
- 2x 26mm adapter
- 2x allen key
- 4x top grab screws (2 different lengths)
- 4x spare ending grab screws
-
$46.00EagleVision 1/2.3″ 12MM LENS GoPro 2, 3 and 4
GOPRO 2, 3 and 4 lens 4K 1/2.3” 12MM, M12 X 0.50
$46.00Select options
This Lens fits the GoPro 2, 3 and 4
This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.
You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.
Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/1.8″ version which is a much better lens that allows more light to the camera for brighter images.
Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed. -
$48.00 – $96.00Two Bar System or Extra Clamps
Eaglevision Twobar or Clamps (Scope Cam)
$48.00 – $96.00Select optionsThese parts are for you if:
- You already have an Eaglevision Scope Camera System and want to convert it to the new Two Bar Configuration
- You need additional clamps to eliminate the need to constantly swap a clamp to another scope.
This is high quality 30mm to 25mm (1″) or 34mm to 30mm scope tube adaptors, made of aluminum.
Here is a top-quality installation video from AirBuks.
Be sure to go by his YouTube channel and watch some of his awesome air gunning content.
Designed To Work With All Eaglevision Scope Mounts.
-
$50.00Eaglevison Firefly Camera Carrier
Firefly 8SE to Eaglevision Scope Cam
$50.00Select optionsFor the user that has an Eaglevision Scope Cam Setup and would like to use a FireFly with it. Some images show the camera case with the optional open door installed. This is not an included option.
-
$60.00GOPRO Camera Housing
Eaglevision GOPRO Camera Housing
$60.00Select optionsEV GoPro Camera Housings.
- Camera Case model for GoPro 5-6-7
- Camera Case for 9-10-11-12
-
Sale!
Original price was: $82.00.$68.00Current price is: $68.00.Collet system goes over diopter
Eaglevision USH-46 Collet
Original price was: $82.00.$68.00Current price is: $68.00.Select optionsThe USH-46 is designed to hold all the scopes with or without threads on eye relief and will connect to the Eaglevision scope camera mounting system.
This unit can be connected to 99% of the scopes with a dimension of 40mm to 46.5mm and it will find the center automatically while you are tightening it.
-
Sold out!
$99.00Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
$99.00Read moreEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
$99.00Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
$99.00Select optionsEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anythingThis mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
$99.00Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail
$99.00Select optionsEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anything This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
$99.00Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 34mm Ring Picatinny
$99.00Select optionsEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.