Compressors & Accessories - Hajimoto Productions LLC

Compressors, filters, hoses, fill adapters, gauges and other high pressure items.

$9.95
Burst Disk Two Pack
Regulator Burst Disks 1.8k, 3k, 5k & 7.5k
$9.95
- 1.8k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
- 3k burst disk is used as the low-pressure burst disk on 3k and 4,5k tanks
- 5k burst disk is used as the high-pressure burst disk on 3k tanks
- 7.5k burst disk is used as the high-pressure burst disk on 4.5k tanks
Actual burst disk finish may be Black, or Bright depending on availability. The Flex Reg Above is an example of 5K and 7.4K Burst Disks.

The Flex Reg Above is an example of 5K and 7.5K Burst Disks.
Select options
$21.95
Mini 5000PSI face
Ninja Black Mini Gauge
$21.95

Ninja Paintballs mini pressure gauge.

Face is black and the dial reads to 5000PSI

Select options
Sale!
Original price was: $25.00.Current price is: $21.95.
Inline high pressure filter
Mini Oil-Water Filter
Original price was: $25.00.Current price is: $21.95.

Mini high pressure inline oil and water separator.

While it is not the largest and most effective oil-water separator, it offers some protection from moisture, oil, and dirt that would otherwise be pushed right into your PCP.

Due to the small capacity of the filter be sure to open the unit up, remove all the filters, and allow them to dry between uses else you run the risk of etching the cylinder or saturating the filters and forcing the trapped water, oil and debris into your PCP

Select options
$21.95
UX 6000PSI GAUGE
Umarex 6K Gauge
$21.95

This is a Replacement 6K Pressure Gauge for the made in Taiwan Gauntlet Regulator.

This gauge will not fit the Ninja Paintball Version

Select options
$22.00
30mm Long Quick Connecter
Extended Fill Coupler
$22.00
- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
Select options
$30.00
Oil Water Separator Cartiridge
$30.00

Replacement / Additional Filter element. This cartridge is for the PCP Air Compressor Filter 4500psi Oil Water Separator we offer. The cartridge has molecular sieve, activated carbon, felt absorbing pads, and dividers installed and ready to go.

Select options
Sale!
Original price was: $80.00.Current price is: $49.00.
Custom length 47″ fill whip
Huben Power – High Fill Whip
Original price was: $80.00.Current price is: $49.00.
This is a high quality heavy duty high pressure fill whip that Hajimoto Productions had made to 47″, which provides a more reasonable amount of slack and distance when using a portable compressor or fill tanks than other whips on the market.
- Heavy Duty 4500 PSI Assembly.
- Rugged and durable material wrapping.
- Replaceable/Serviceable Stainless Steel threaded high pressure fittings.
- Fits the typical 8mm fill nipple on PCPs and Paintball equipment.
Select options
$59.95 – $69.95
Microbore 4500PSI Extension
Ninja Microbore Fill Whip
$59.95 – $69.95
- 30% Lighter and Smaller than standard HPA hoses
- Extremely flexible 30 or 46 inch hose
- 4500 PSI working pressure
- Works with any HPA or CO2 system
- Made in USA
Select options
$110.00 – $175.00
PCP Air Compressor Filter 4500psi Oil Water Separator
$110.00 – $175.00

A quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.

Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.

Made from high-quality aircraft aluminum and is rated for safe use.

Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.

Select options
Sale!
$115.00 – $424.00
With or Without Cylinder
Doux Avenger Bottle Adapter
$115.00 – $424.00
Convert your Air Venturi Avenger into a bottle PCP!
- Adapter Threaded for M18 x 1.5 Air Cylinder.
- Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
- All Stainless Steel Construction.
Made in South Africa

Installation video below:
Select options
$499.00 – $650.00
NEW MODEL
JTS COMP1 Portable HPA Compressor
$499.00 – $650.00
JTS COMP1 Portable PCP Compressor
- Max. pressure: up to 4,500 PSI.
- Power converter is built inside unit.
- Exclusive heat pipe cooling system.
- Adjustable auto-shutoff.
- Power source: 12V car battery or 110V/220V outlet.
- Moisture filter.
- The compressor includes carrying handle.
- Thermal dissipation system with high-flow fan cooling.
- No oil required.
- Built-in water separator.
- Jumper cables included.
- Includes fill hose.
- Sealed needle-style crankshaft roller bearing.
CONSIDER THE PACKAGE DEAL FOR AWESOME SAVINGS
Package deal includes Compressor, Large Filter with two Cartridges, and Microbore fill whip!

Here are the COMP1 OWNERS MANUAL and schematic for your use and reference.

The oil to use for this compressor is 100% synthetic and can be purchased through AMAZON at the following LINK
This lubrication has high thermal and oxidation stability assuring long fluid life in both operating and storage conditions; Excellent performance in high temperature, high load, and continuous operating conditions.

The JTS COMP1 compressor is exempt from any other published discounts or coupon codes.
All/any warranties are manufacturer provided.

Please follow the CUSTOMER REPAIR REQUEST information found on the JTS website
.
Select options
Sale!
Original price was: $850.00.Current price is: $550.00.
NEW MODEL
Lil Foot 2.0 By PCP KONG
Lil Foot 2.0 110V/12V Compressor
Original price was: $850.00.Current price is: $550.00.
Features:
- LED DIGITAL DISPLAY
- 4500 PSI/310 BAR
- Adjustable pressure setting
- Comes with an extended fill probe
- Comes with a carry bag
- Compatible with 110v wall outlet
- 12v car battery or standalone 12v supply
- Auto shutoff
- Fan cooled
- 18 lbs
- 11”L x 9”H x 8.5”W
- Uses 100% silicone oil only (please see manual)
- 1 year limited warranty
- Will not fill a scuba tank
*Comes with silicone oil
Select options