-
Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail
$99.00Select optionsEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anything This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 34mm Ring Picatinny
$99.00Select optionsEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
Fits the G1, G2 or G30
Real 2 Stage Trigger for the Gauntlet
Rated 5.00 out of 5$110.00Select optionsFull-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
- The Trigger Is Stainless Steel 17-4 Through Hardened
- The Trigger Shoe Is Aluminum 6061-T6
Please see the installation video below for more details.
Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger. -
For G30 and G30SL
G30 Barrel Shorten and Recrown
$110.00Select optionsService to reduce barrel length removing the barrel choke making the barrel better for slugs.
-
PCP Air Compressor Filter 4500psi Oil Water Separator
$110.00 – $175.00Select optionsA quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.
Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.
Made from high-quality aircraft aluminum and is rated for safe use.
Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.
-
Sold out!
EagleVision 1/1.8″ 12MM LENS GoPro 2, 3 AND 4
GOPRO 2, 3 and 4 lens 4K 1/1.8” 12MM, M12 X 0.50
$112.00Read moreLens fits the GoPro 2, 3 and 4.
This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.
You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.
Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/2.3″ version but this 1/1.8″ version (this one) is better because the lens allows more light to the camera for brighter images.
Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed. -
This Builder Starts With the Tactical Adapter
TacVenger DIY KIT CUSTOM
From $125.00Select optionsThis is where you can build your own TacVenger Kit to install on your existing Avenger.
Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.
The Kit Starts with the Buck Rail Tactical. We are no longer using the AE Swede Chassis.
then you simply add the items you want in your kit and you are all set!
The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.
-
for .177, .22 and .25 NOT .30
Gauntlet Short Shroud Combo
$130.00 – $215.00Select optionsThis part is designed and manufactured by DonnyFL for airgun use only
Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber
Stock baffle spring must be used!
Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.If Your Gauntlet is:
- .177 Get a .177/.22 Supressor
- .22 Get a .22/.25 Supressor
- .25 Get a .25/.30 Supressor
Get it?
-
EagleVision 1/1.8″ 12MM LENS
GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
$130.00Select optionsLens fits the GoPro 5, 6 and 7.
This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.
You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.
Item includes:
- Free case.
- GoPro fitting Lens
I only stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.
Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC
Just click HERE to be redirected to this product on his website.
Be sure to tell Bob that Hajimoto sent ya ? -
Sold out!
SC-40 ONLY not a full kit
Eaglevision Side-Cam SPLITTER ONLY
$134.00Select optionsPlease note:
This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)
-
For G1, G2/22, G2/25, G30, SL22, SL25 or SL30
Gauntlet Tactical Conversion Kit
$139.99Select optionsIntroducing a Buck Rail and Hajimoto Collaboration! A super strong tactical conversion kit for the Umarex Gauntlet!
- Laser Sintered Nylon construction. LIFETIME WARRANTY
- Made in the USA by a veteran-owned business
- Add an AR Pistol Grip and Adjustable Buttstock to your Gauntlet
- Compatible with Gauntlet G1, G2, and SL30
- Accepts Milspec or Commercial AR15/AR308 Extension Tubes
- Handguard accepts M Lok accessories
- Over 1 pound of weight savings over OEM stock
Installation video is listed below