Accessories

  • Sold out!
    Avenger Shroud Adapter
    $33.95
    Avenger Shroud Adapter
    $33.95

    The Newer Avengers use a threaded plastic shroud adapter which the shroud screws onto. The stock plastic mount is weak and prone to breaking if over tightened which means you cannot tighten it down adequately. This can lead to the shroud being able to move around a bit which will affect accuracy. This high-quality adapter will fix those issues and create a more consistent shooting airgun. Or just replace a broken or damaged shroud mount.

    The AE Swede adapter is CNC machined from 7075 high-strength aluminum part and utilizes two set screws. You can clock the piece however you want and do not need the stock barrel detents to lock in place. This helps when holes have been drilled in the shroud at the rear for extra sound deadening ability.

    Read more
  • Sold out!
    $35.00
    Evanix Rainstorm II Baffle Stack
    $35.00

    Evanix Rainstorm II Baffle Stack

    Here is an 8 piece multi-sized baffle stack for the Evanix Rainstorm/Rainstorm II. The HP Baffle Stack strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path.
    The Rainstorm HP Baffle Stack requires the non cone STAND OFF to be sized by the user. You will need to sand the STAND OFF down to the required height for your rifle.
    The HP Baffle Stack should be installed as follows, from the front, further-est from the barrel, Short/Full/Full/Short/Short/Full/Full/Standoff at the muzzle.

    Baffles should be pointing towards the breech

    <= Towards the breech —— Towards the Muzzle of shroud =>

    [â–‘â–‘] <â–‘] <â–‘â–‘] <â–‘â–‘] <â–‘] <â–‘] <â–‘â–‘] <â–‘â–‘] CAP
    SO    SC     NC     NC    SC   SC    NC     NC

    SO = STAND OFF
    NC = NORMAL CONE
    SC = SHORT CONE

    Select options
  • Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    For Gauntlet .177, .22, .25 and .30 Calibers

    Hajimoto’s Gauntlet Expanded Magazine
    $35.00 – $40.00

    Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

    Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design or the new magnetic lidded version.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
    • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
    • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
    • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Sale!
    HP Stak Pak for Hatsan QE
    Original price was: $39.99.Current price is: $35.00.
    HP Stak Pak for Hatsan QE
    Original price was: $39.99.Current price is: $35.00.

    Stak Pak for Hatsan QE shrouds (.357 & .457 Not Included)

    Simply unscrew your shroud end cap, remove the two felt-covered stock baffle assemblies, remove the two aluminum stand-off chambers, and install the Hajimoto Stak Pak. No tools, no modifications, just a simple one-for-one swap! Some model Hatsans will use all the baffles others will need one less full-sized baffle, be sure to use both shorter baffles and leave out the full-sized one. If you need to leave one out, leave out the very first full-sized baffle and then arrange the stack as shown in the packaging.

    A ten-piece kit that directly replaces the two hair curler style baffles that come inside any Hatsan that has a QE shroud system, excluding .357 & .457 models. The bundle has nine baffle chambers to help remove both noise and turbulence in the air stream. The baffle stack rides on a high tension compression spring allowing for a perfect fit for any Hatsan QE PCP, excluding .357 & .457 models.

    The end result is a more laminar air stream which reduces projectile instability and substantially changes the sound of the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A24 adapter.

    Installation video is listed in the DESCRIPTION section below

     

    Select options
  • RTI Priest 2 Shroud Extender #A66
    $35.00

    RTI Priest 2 Shroud Extender #A66

    RTI Priest 2 Shroud Extender #A66
    $35.00

    If your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so.

    Features:

    • 6061 T6 aluminum
    • Knurled cap
    • Matte black anodize
    Select options
  • Sold out!
    $35.00
    DonnyFL KOI/Tanto Endcaps
    $35.00

    KOI and Tanto End caps in 1/2 x 20 threads

    Select options
  • HP Avenger Exp Mag
    $35.00 – $40.00

    Fits both Avenger and Origin

    HP Avenger Exp Mag
    $35.00 – $40.00

    New new redesigned HP 2.0 magnetic lid design is available for the .22 Caliber!

    Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177,  .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • New magnetic lid design available for .22.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of all calibers is 50.25MM (1.978″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Avenger Bottle Conversion – Barrel Band
    $35.00

    Air Venturi Avenger Bottle Conversion Barrel Band

    Avenger Bottle Conversion – Barrel Band
    $35.00
    Available in two sizes:
    • Small 59-61mm Diameter CF Tank (Typically fits 0.35L (350cc), 0.36L (360cc), 0.42L (420cc), 0.45L (450cc), 0.50L (500cc), & 0.70L (700cc) cylinders)
    • Large 62-63mm Diameter CF Tank (Typically fits: 0.38L (380cc), 0.48L (480cc) & 0.58L (580cc) Cylinders)

     ** YOU MUST MEASURE YOUR CYLINDER TO BE SURE. THE ABOVE ARE TYPICAL SIZES YOURS MAY VARY **

    The barrel band is designed by Hajimoto Productions and made from ABS and Carbon Fiber for a strong and lightweight design. The barrel band is designed to live at the end of the cylinder as shown and has a section of Picatinny rail on the bottom to allow for the attacking of a bipod, flashlight, camera, or laser pointer. The Picatinny rail is not designed to support the entire air rifle in a clamp or tripod used in standing rests.

    This Barrel band is specifically designed for an Avenger that has the Doux bottle conversation kit installed and a 60.5mm to 63mm diameter cylinder.

    Select options
  • HP MROD Exp Mag
    $35.00

    The MROD, Expanded Magazine

    HP MROD Exp Mag
    $35.00

    Here is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

    Remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    Features

    • Redesigned magnetic lid design available in .22 only for now.
    • Drop in loading.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock mag. The magazine height is 50.25MM (1.978″)
    • .22 = 17 shots which is an increase of 70% more shots over the stock mag. The magazine height is 50.25MM (1.978″)
    • .25 = 14 shots which is an increase of  almost 60% more shots over the stock mag The magazine height is 48.02MM (1.890″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Hajimoto’s Airacuda, Expanded Magazine
    $35.00 – $40.00

    Airacuda & Airacuda Max .22/.25

    Hajimoto’s Airacuda, Expanded Magazine
    $35.00 – $40.00

    Here is a high-quality, expanded capacity magazine specifically designed to fit the Airacuda line of PCP’s .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it for distance shooting.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of the Expanded mag for .22/.25 is 50.25MM (1.978″)
    • The magazine height of the Mini mag for .22/.25 is 46.00MM (1.811″)
    • Available in right-side loading for the .22 caliber soon to come for the .25 cal.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Umarex Gauntlet 1/2 x 20 adapter #A23
    $40.00

    For the Gauntlet 1 or 2

    Umarex Gauntlet 1/2 x 20 adapter #A23
    $40.00

    This part is designed and manufactured by DonnyFL

    Select options
  • Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00
    Liberty/Aspen/Avenger/Origin 1/2 x 20 #A50
    $40.00

    Fits the Nova Liberty, Aspen, AV Avenger, and Origin PCP’s

    This is a direct replacement end cap that when installed provides 1/2 x 20 UNF threads to allow the installation of your favorite moderator or suppressor. If you are looking for a better and stiffer barrel to barrel shroud connection that helps eliminate point-of-impact changes or projectile clipping issues, consider going with the A70 Adapter which essentially marries the barrel to the shroud.

    If you are a Hajimoto Productions Strip Stak Pak (SSP) user, then stick with the A50 because the A70 will not work with the SSP.

    This part is designed and manufactured by DonnyFL

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.