Accessories

$150.00
EagleVision 1/1.8″ 12MM LENS
GOPRO 9,10,11,12 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
$150.00

Lens fits the GoPro 9, 10, 11 and 12.

GoPro 9, 10, 11, and 12 cannot be used on the scope cam without changing the lens.
In order to use this product as intended, you MUST watch the below video on how to change the lens.
Once the lens has been removed, it can’t be reused again, and your camera can be used only with our lens.

Your camera will be out of warranty if you remove the lens.

DO NOT order the Eaglevision scope cam kit or this lens if you are not confident you can execute the installation.

The Gopro retention plate and the Eaglevision finish plate use Torx T4 star head screws. You will need a T4 screwdriver or T4 screwdriver bit to do the installation.

This is a high-quality GoPro customized low sensor lens with a special coating and a large wide lens to get maximum light to GoPro camera when using Gopro on rifle scopes, when using it for scope cam such as air gunning, airsoft, paintball, hunting, etc.

We are not responsible for any damage you may cause to your camera when doing the lens swap.

Lens swap video

Select options
Sold out!
$150.00
Umarex Zelos Regulator by HubenPower
HubenPower Zelos Regulator
$150.00
COMING SOON!!!
- For Umarex Zelos
- Can be installed in 300bar/4500psi tank，Provides pressure reduction function for Umarex Zelos’ 300bar tank, reducing the 300bar/4500psi tank pressure to below 250bar/3625psi
- Installs directly without modification
- Rotary joint design, easy to adjust the position of the pressure gauge and fill nipple.
- Stainless steel material, strong and durable
- The factory set output pressure is approximately 22~24Mpa (3190~3480psi). This is not the final shooting pressure, Do not adjust!. （Do not turn the bottom adjustment knob if you are not sure what you are doing.）
- Umarex Zelos has an internal regulator. When you need to adjust the pressure for actual shooting, adjust the internal Zelos original regulator.
- Please do not adjust the output pressure of this product to more than 250bar (3625 psi)
- Comes equipped with a standard 8mm quick disconnect male foster fitting adapter for filling.
- The regulator has a high air flow rate, lightweight, easy operation, and re-buildable.
- Compatible with Air/CO2.
Read more
Sold out!
$154.95 – $155.00
Ninja High Pressure Metric M18 Custom Output
$154.95 – $155.00
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

The ball and spring are provided but removed from the regulator.
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE
```
Select options

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

NEW MODEL

PRO V3 REG WITH 13CI TANK

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. 
Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight.
A complete regulator rebuild kit is included!

This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI.
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator

Select options

$159.00 – $169.00
5/8″-18UNF Threaded Unit
Flex Reg Hajimoto Configurations
Rated 4.00 out of 5
$159.00 – $169.00

Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
Say goodbye to only one fixed output pressure!
The user has an 800 – 900 psi adjustment swing!
Requires minor forestock modification.
The regulator thread is 5/8-18UNF (Bottle Thread) and Typical Paintball Threads of .825-14 NGO (PCP Thread).

Please note the Flex regulator can be used with any Air, Co2, or Nitrogen driven air gun not just the Gauntlet, providing it has the correct threading.

The Ninja Flex regulator is available in any 900 psi spread to a maximum of 3100 psi output but for the Gauntlet select from the proper configuration.
If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

How to read the below configurations
Example: Flex Reg .22 | 4500/1600 to 2400 psi
Flex Reg .22 = Regulator Type for .22 caliber
4500/ = The bottle’s maximum fill pressure
1600 to 2400 psi = The output range of the Flex Reg

Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex Reg .177/.22 |3000/600 to 1500PSI

Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex Reg .25 | 3000/1500 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
Stock .22 | 4500/1900PSI Regulator
Flex Reg .22 | 4500/1500 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
Stock .25 | 4500/2100PSI Regulator
Flex Reg .25 | 4500/1500 to 2400PSI

Flex Reg Configuration For G30 Cal
Stock .30 | 4500/2800PSI Regulator
Flex Reg .30 | 4500/2100 to 3100PSI

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Select options
Sale!
Original price was: $210.00.Current price is: $159.00.
G1 Regulator, 22ci Tank and Barrel Band
Gauntlet 1 Power Bundle
Original price was: $210.00.Current price is: $159.00.
Our Gauntlet 1 Power Bundle! For the Umarex Gauntlet 1 in .177, .22 or .25 Calibers (Bundle is not for the Gauntlet 2)

The Bundle Consists of the following:
- Brand New Ninja Regulator (1100psi, 1300psi, 1900psi, or 2100psi)
- Brand New 22ci 3000psi Aluminum Tank for 40% more volume.
- Our HP Barrel Band with Picatinny Rail for Flashlight or Bipod.
All for the cost of a regulator alone!

PCP/CALIBER STOCK PRESSURE BOOSTED PRESSURE

G1 .177 1100PSI 1300PSI

G1 .22 1100PSI 1300PSI

G1 .25 1900PSI 2100PSI
Select options
Sold out!
Original price was: $175.00.Current price is: $160.00.
Used as the Haji-Notos Power Plant
Huben Power – Dream-Notos TK
Original price was: $175.00.Current price is: $160.00.
THE TK VALVE ONLY IS CURRENTLY OUT OF STOCK
IF YOU WANT THE POWER PLANT COMBO, WE DO HAVE STOCK
CLICK HERE

Genuine Huben Power Regulator with Power Plenum

This is the Power Plant that we use for our Haji-Notos build. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

FEATURES
- Externally adjustable Regulator Output 500psi~3600psi
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Tank Threads : M18*1.5
- Power Increase on the fly but decrease requires degassing the plenum.
** BE SURE TO READ DETAILS BELOW **
Read more
$173.00 – $175.00
NEW MODEL
PRO V3 ON 22ci 3K Cylinder
Ninja 22ci 3000PSI Air Tank with Pro V3 Regulator
$173.00 – $175.00

Includes Ninja’s Pro V3 regulator with Stainless Steel Threaded 36o° rotational Cap.
Say goodbye to gauges and foster nipples not lining up with the openings in the stock.

This is an aluminum 22ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI. Simply select the desired pressure in the dropdown.

PRESSURE – STOCK AND RECOMMENDED
Stock .177/.22 | 22ci/3000/1100PSI Regulator
Super Tuned .177/.22 (IF STK IS INSTALLED) | 22ci/3000/1400PSI Regulator

Stock .25 | 22ci/3000/1900PSI Regulator
Super Tuned .25 (IF STK IS INSTALLED) | 22ci/3000/2100 Regulator

This setup is for the original Umarex Gauntlet 1 with the Black stock.
A complete regulator rebuild kit is included!

NINJA REGULATORS ARE MADE IN THE USA!

Select options
$179.00
Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
$179.00

Introducing a Hajimoto Productions Exclusive offer!

13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSI

Flex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSI

Installs on the Gauntlet with minor tank shroud modifications.

A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.

Select options
Sold out!
Original price was: $245.00.Current price is: $185.00.
Hawkeye Firefly 8SE 4K 90 Degree Distortionless version
Original price was: $245.00.Current price is: $185.00.
Orders are normally shipped the same day and typically are delivered within 4 days anywhere in the US*

Keep in mind folks, a GoPro 11 will set you back $300-$350 USD plus you need to swap out the lens for another $150USD!

Description:
Brand Name: Hawkeye Series
Name: Firefly Item Name: 8SE
Version: 90 degrees Distortionless version
Chipset: Ambarella A12S75
Type: Sports Camera
Type of Camera: 4K
Kind of Micro SD card Supported: U3 (Note:Low speed SD card will cause unstable operation)
Maximum Size of Micro SD card Supported: 128G (not included)
Wi-Fi +BT 3.0 Remote Control: Yes
LCD Screen Size: 2 inch IPS 320*240 with TP Lens Diameter: 12mm
Camera Size: 59×41×21mm
Weight: 70g
Battery Capacity(Battery is detachable): 1200mAh, 3.85V Battery Life: About 1.33 hours (25℃ environment)
Time to Complete Charging: About 3 hours (5V 1A power supply, and power off while charging)
Compressed Format: H.264
Video/photo Format: *.MP4 / *.JPG
Distortionless Version Diaphrag: F/2.8, 11 glass
Working Voltage: 5V
Power Supply: 1A
Photo Resolution: 16M/14M/12M/8.3M/5M/3M
AV Output Format USB Port: PAL/NTSC
HD Output: Yes
WIFI: Yes
Features:
– Ambarella A12S75 and with SONY IMX117 12 Mega WDR CMOS Sensor.
– 2 inch IPS touch screen, 4K 30fps maximum video resolution, 12MP camera pixels.
– 1200mAh 3.85V high-voltage high-capacity battery, more durable.
– Gyro 2.0 image stabilization,
– Supports WiFi
– Support for Bluetooth connection remote control (not included).

Package Includes:

1 x Camera

1 x Waterproof Case

1 x Waterproof Case Front Cover Case

1 x Bicycle Stand 1 x J Base 4 x Strap

1 x Plastic Tie

1 x Long Connector with Screws

1 x Short Connector with Screws

1 x 1/4 inch Adapters Set

2 x Mounting Base

2 x Adhesive Tape

1 x Metal Cable Tie

1 x Cleaning Cloth

1 x Lens Protection Frame

1 x Lens Protective Cover

1 x Microphone

1x English User Manual

All/any warranties are manufacturer-provided.

English Manual,
Click Here

*Typical delivery times are based on the shipping company. Hajimoto Productions is not qualifying the logistics firm’s ability to hit their delivery dates. Just know that we 100% guarantee that the item will ship within 30 hours.
Read more
Sale!
Original price was: $220.00.Current price is: $195.00.
Installation of our Sidelever on G2 or G1
Gauntlet Sidelever Install
Original price was: $220.00.Current price is: $195.00.

This service is for the installation of our sidelever cocking system installed in your action. The Sidelever is no longer being offered for .30 caliber variants.

Our side lever system eliminates one of the main gripes folks have with the Umarex Gauntlet and that is COCKING EFFORT!

There is no comparison in cocking effort when you apply the mechanical advantage a sidelever gives you. The installation is a non-destructive installation and can be reversed without any compromise to the airgun’s action or stock.

The sidelever system is a CNC milled 6061 Aluminum part which is hard anodized for a great match to the existing Gauntlet finish. The cocking vertical handle is an additive manufactured carbon fiber & ABS part that can be swapped out by you if you wanted to use a custom handle from wood or other material.

Our sidelever cocking system does require that you hold the handle back to swap mags but there is no need to hold back if you single load using the single shot tray.

One of the most common questions we get is “Can I just buy the parts and install them myself?” and the short answer is, no you cannot. For the reasons why, please read the ARTICLE we published in our blog in February 2023 on this topic.

See below for detailed shipping instructions and preparation videos.

Select options
$200.00
Tank Valve ST0031
Saber Tactical Tank Valve
$200.00

Replace your factory tank valve with our larger valve. The large knobs and handle make filling and releasing air a breeze

Select options

PCP/CALIBER	STOCK PRESSURE	BOOSTED PRESSURE
G1 .177	1100PSI	1300PSI
G1 .22	1100PSI	1300PSI
G1 .25	1900PSI	2100PSI

Lens fits the GoPro 9, 10, 11 and 12.

Lens swap video

COMING SOON!!!