Accessories

Sold out!
$130.00
EagleVision 1/1.8″ 12MM LENS
GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
$130.00
Lens fits the GoPro 5, 6 and 7.

This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

Item includes:
- Free case.
- GoPro fitting Lens
I only stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.

Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC

Just click HERE to be redirected to this product on his website.
Be sure to tell Bob that Hajimoto sent ya ?
Read more
Sale!
Original price was: $150.00.Current price is: $130.00.
User adjustable M18 regulator
Huben Power Black Hawk Pro
Original price was: $150.00.Current price is: $130.00.
The Huben Power Black Hawk Pro is a very stable, high flow M18 threaded adjustable regulator that allows the user to adjust the output pressure to whatever is required for the application. The quality of materials and craftsmanship is top tier. We tested these regulators here at Hajimoto Productions and the standard deviation was so low it was incredible.

FEATURES
- Rotational bonnet allows for exact thread indexing/clocking of the regulator to the PCP.
- Stream line and slim structural design
- Thread: Bottle = M18*1.5 and PCP = G1/2-14
- Max up to 4500psi high pressure gauge input.
- Regulating output pressure range 500psi~3600psi
- Comes with standard 8mm quick disconnect male foster fitting adapter for filling.
- Dust caps may be green or black randomly.
- The regulator has a high air flow rate, is light weight, easily operational, re-buildable, designed for use with HPA/CO2.
Select options
Sold out!
$134.00
SC-40 ONLY not a full kit
Eaglevision Side-Cam SPLITTER ONLY
$134.00

Please note:

This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)

Select options
Sale!
$135.00 – $140.00
360CC 4.5K PSI M18 Threaded CF Tank
0.36L M18 Thread Carbon Fiber Tank
$135.00 – $140.00
Features
- Lightweight High Pressure Carbon fiber Cylinder
- 360cc/0.36L capacity
- Available in Gloss Or Matte
- 9″ x 2.4″ (228mm x 61.5mm)
- M18 Threaded
Shown Below On the HajiNotos
Select options
$139.99
For G1, G2/22, G2/25, G30, SL22, SL25 or SL30
Gauntlet Tactical Conversion Kit
Rated 5.00 out of 5
$139.99
Introducing a Buck Rail and Hajimoto Collaboration! A super strong tactical conversion kit for the Umarex Gauntlet!
- Laser Sintered Nylon construction. LIFETIME WARRANTY
- Made in the USA by a veteran-owned business
- Add an AR Pistol Grip and Adjustable Buttstock to your Gauntlet
- Compatible with Gauntlet G1, G2, and SL30
- Accepts Milspec or Commercial AR15/AR308 Extension Tubes
- Handguard accepts M Lok accessories
- Over 1 pound of weight savings over OEM stock
Accessory options include a Grip, Buffertube, and Collapsable Butt Stock

Installation video is listed below
Select options
$144.95
Ninja X Reg Custom Output Regulator up to 3100psi
Ninja High Pressure 5/8″-18UNF Custom Output Regulator
$144.95
5/8″-18UNF thread can be used on 3000PSI bottle as well. This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP regulator output pressures in increments of 100PSI.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 50 psi tolerance.
```
Select options

$146.00

NEW MODEL

Pro V3 for 3K and 4.5K Cylinders

Ninja Pro V3 Regulator 5/8″ Thread

$146.00

The Hajimoto Ninja Paintball Pro V3 SHP in 5/8”-18UNF Thread with Stainless Steel Cap Threads

Ninja's Pro V3 SHP with rotional bonnet.
A perfect replacement for the regulator found on the on the Gauntlet 2.
A complete regulator rebuild kit is included!

MADE IN THE USA!
Ninja regulator output pressures in increments of 100PSI.
Simply select your desired output pressure.
Output ranges from 1100PSI to 2400PSI.
All custom built pressure units will have a +/- 50 psi tolerance.
Dont confuse the this regulator with the lower pressure SLP versions out there, there is a difference.

Select options

Sold out!
$149.00 – $159.00
5/8″-18UNF Threaded Unit
Flex Reg Hajimoto Configurations
Rated 4.00 out of 5
$149.00 – $159.00

Were expect to have these back in stock by 11/20/2024

Ninja Paintballs’ Flex Reg with Custom Gauntlet Configuration.
Say goodbye to only one fixed output pressure!
The user has an 800PSI adjustment swing!
Requires minor forestock modification.
The regulator thread is 5/8-18UNF

The Ninja Flex regulator is available in any 900PSI spread to a maximum of 3100PSI output but for the Gauntlet select from the proper configuration.
If you select the Custom Configuration, you will need to use the NOTES above to communicate what you want the maximum output to be.

How to read the below configurations
Example: Flex Reg .22 | 4500/1600 to 2400 psi
Flex Reg .22 = Regulator Type for .22 caliber
4500/ = The bottle’s maximum fill pressure
1600 to 2400 psi = The output range of the Flex Reg

Flex Reg Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex Reg .177/.22 |3000/700 to 1500PSI

Flex Reg Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex Reg .25 | 3000/1600 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .22 Cal
Stock .22 | 4500/1900PSI Regulator
Flex Reg .22 | 4500/1600 to 2400PSI

Flex Reg Configuration For Generation 2 Gauntlet .25 Cal
Stock .25 | 4500/2100PSI Regulator
Flex Reg .25 | 4500/1600 to 2400PSI

Flex Reg Configuration For G30 Cal
Stock .30 | 4500/2800PSI Regulator
Flex Reg .30 | 4500/2100 to 3100PSI

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Select options
$150.00
EagleVision 1/1.8″ 12MM LENS
GOPRO 9,10,11,12 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
$150.00

Lens fits the GoPro 9, 10, 11 and 12.

GoPro 9, 10, 11, and 12 cannot be used on the scope cam without changing the lens.
In order to use this product as intended, you MUST watch the below video on how to change the lens.
Once the lens has been removed, it can’t be reused again, and your camera can be used only with our lens.

Your camera will be out of warranty if you remove the lens.

DO NOT order the Eaglevision scope cam kit or this lens if you are not confident you can execute the installation.

The Gopro retention plate and the Eaglevision finish plate use Torx T4 star head screws. You will need a T4 screwdriver or T4 screwdriver bit to do the installation.

This is a high-quality GoPro customized low sensor lens with a special coating and a large wide lens to get maximum light to GoPro camera when using Gopro on rifle scopes, when using it for scope cam such as air gunning, airsoft, paintball, hunting, etc.

We are not responsible for any damage you may cause to your camera when doing the lens swap.

Lens swap video

Select options
$154.95 – $155.00
Ninja High Pressure Metric M18 Custom Output
$154.95 – $155.00
Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to only offer the polished brass version once all the black steel bonnets are gone.

We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.

You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/

The ball and spring are provided but removed from the regulator.
```
Take advantage of a quality regulator for your high pressure application.

MADE IN THE USA!
Ninja HP Metric regulator output pressures in increments of 100PSI.
This is a M18 threaded regulator made for M18 threaded bottles.
This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded.
Simply select your desired output pressure from 1100PSI TO 3100PSI
All custom built pressure units will have a +/- 75 psi tolerance.

If you need a low output build with a fixed out of of something between 
300 psi and 1100 psi, the CUSTOM pessure option and provide the output
desired in the notes.

If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30
You will want the 5/8"-18 Version that is found HERE
```
Select options

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

NEW MODEL

PRO V3 REG WITH 13CI TANK

Ninja 13ci 3000PSI Air Tank with Pro V3 Regulator

$155.00

Includes Hajimotos Pro V3 regulator with Stainless Steel Threaded rotional Cap. 
Say goodbye to gauges and foster nipples not lining up with the stock openings when the is installed tight.
A complete regulator rebuild kit is included!

This is an aluminum 13ci bottle that holds 3000PSI including a Pro V3 regulator with custom output pressures in increments of 100PSI.
Simply select the desired pressure in the dropdown.

Pressure Recommendations For Umarex Gauntlet Generation 1 .177, .22 and .25
Stock Gauntlet Gen1 .177/.22 | 13ci/3000/1100PSI Regulator
Gauntlet with STK Installed .177/.22 | 13ci/3000/1400PSI Regulator
Stock Gauntlet Gen1 .25 | 13ci/3000/1900PSI Regulator
Gauntlet with STK Installed .25 | 13ci/3000/2100 Regulator

Select options

Sale!
Original price was: $175.00.Current price is: $160.00.
The Haji-Notos Power Plant
Huben Power – Dream-Notos TK
Original price was: $175.00.Current price is: $160.00.
Genuine Huben Power Regulator with Power Plenum

This is the Power Plant that we use for our Haji-Notos build. It allows for precise power adjustment allowing the Notos to deliver only the power required for the situation. If you want to shoot pest birds in a barn or feed house, you can dial it back to fly pellets as low as 400 ft/s, or if you are hunting grey squirrels and want to deliver a JSB Hades 15.89 gr at over 750 ft/s you can do that too.

FEATURES
- Externally adjustable Regulator Output 500psi~3600psi
- Ultra-stable output pressure
- Power Plenum with rotatable joint for perfect clocking, locked in place with set screws.
- Standard 8mm quick disconnect male foster fitting adapter for filling.
- Built-in Picatinny Rail Section for Bipod or Tripod Shooting.
- Tank Threads : M18*1.5
- Power Increase on the fly but decrease requires degassing the plenum.
** BE SURE TO READ DETAILS BELOW **
Select options

Please note:

This is the main body only, you cannot use this part alone without a scope connection method like the USH-46 (Collet system) or the 2B-USH/2B-UCH (Two Bar and Clamp System)

Installation video is listed below

Lens fits the GoPro 9, 10, 11 and 12.

Lens swap video