-
$99.00Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
$99.00Select options
Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anythingThis mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
$99.00Eaglevision IPS Mount
Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail
$99.00Select optionsEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anything This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spare screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
$99.00Eaglevision INS Mount
Infinity INS Elevation Adjustable Scope Mount 34mm Ring Picatinny
$99.00Select optionsEaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.
The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.
Item includes:
- 2 x infinity scope mount.
- 2 x allen key (different sizes).
- 4 x spears screws.
- 1 x large spear screw.
- Protection ring fabric.
- Waterproof case.
-
Sale!
Original price was: $130.00.$100.00Current price is: $100.00.Buck Rail
Avenger Grip Adapter V3
Original price was: $130.00.$100.00Current price is: $100.00.Select options -
$110.00Fits the G1, G2 or G30
Real 2 Stage Trigger for the Gauntlet
$110.00Select optionsFull-fledged 2-stage trigger for the Umarex Gauntlet 1, 2 or G30. This trigger is a direct replacement for the single-stage trigger that ships with the Umarex Gauntlet. This trigger is a straightforward install that will increase the accuracy of your shooting due to a more predictable and consistent breakpoint.
- The Trigger Is Stainless Steel 17-4 Through Hardened
- The Trigger Shoe Is Aluminum 6061-T6
Please see the installation video below for more details.
Super Tune Kit Users
You must use the stock trigger return spring with the two-stage trigger as the trigger spring that comes with the Super Tune Kit is too light to be effective with the two-stage trigger. -
$110.00For G30 and G30SL
G30 Barrel Shorten and Recrown
$110.00Select optionsService to reduce barrel length removing the barrel choke making the barrel better for slugs. Service
The service executes the following:
- Reduce barrel length by 2.5″ to remove the choke.
- Recrown barrel.
- We provide a new shorter replacement barrel shroud.
This can be added to a custom build order or a send-in modification request. Customers who wish to send in their barrel for service can ship either the entire rifle or just the barrel, barrel shroud, and end cap. The barrel will be heavily cleaned and coated with silicone oil to protect the surfaces for the trip home.
Once the order is received, a follow-up email will be provided. Depending on the service request, the response will contain detailed shipping instructions, including the shipping address and other pertinent information required on the label for the service request being shipped to us.
This service price does not include shipping or parts. Shipping costs to return your PCP or PCP parts will need to be calculated and communicated to you before the order ships back.The reduction of an airgun barrel typically results in a decreased rate of travel of 15-20 ft/s per inch.
Any outstanding balance must be paid before we ship out the service order.
-
$110.00 – $175.00PCP Air Compressor Filter 4500psi Oil Water Separator
$110.00 – $175.00Select optionsA quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.
Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.
Made from high-quality aircraft aluminum and is rated for safe use.
Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.
-
$110.00MDSR1 Micro Dot Sight with Riser
Axeon Optics
$110.00Select optionsFeaturing a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.
Features:
- 1X Magnification
- 20mm Objective
- Red Dot LED Reticle
- .50 MOA Adjustment Size
- Adjustable Windage and Elevation
-
Sold out!
$112.00EagleVision 1/1.8″ 12MM LENS GoPro 2, 3 AND 4
GOPRO 2, 3 and 4 lens 4K 1/1.8” 12MM, M12 X 0.50
$112.00Read moreLens fits the GoPro 2, 3 and 4.
This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.
You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.
Item includes:
- Free case.
- GoPro fitting Lens
I also stock the 1/2.3″ version but this 1/1.8″ version (this one) is better because the lens allows more light to the camera for brighter images.
Please note:
The GoPro it’s not included, it is only shown so one can see what the lens looks like installed. -
Sale!
$115.00 – $424.00With or Without Cylinder
Doux Avenger Bottle Adapter
$115.00 – $424.00Select options
Convert your Air Venturi Avenger into a bottle PCP!
- Adapter Threaded for M18 x 1.5 Air Cylinder.
- Option to add a 500cc or 700cc 4.5K Carbon Fiber Bottle.
- All Stainless Steel Construction.
Made in South Africa
Installation video below:
-
From $125.00This Builder Starts With the Tactical Adapter
TacVenger DIY KIT CUSTOM
From $125.00Select optionsThis is where you can build your own TacVenger Kit to install on your existing Avenger.
Only use this builder if you are including a carbon fiber bottle in the builder because the shipping fees are based on that item as a start. If you only want a couple of items, add them to your cart separately using the parts finder method and not this builder.
The Kit Starts with the Buck Rail Tactical. We are no longer using the AE Swede Chassis.
then you simply add the items you want in your kit and you are all set!
The WHT 4-16x16FFP scope comes with, a set of Picatinny scope rings and a Large Focus Wheel.
-
Sale!
$125.00 – $130.00Chronograph by Nate
NateChrony V2
$125.00 – $130.00Select options
The NateChrony is a barrel mounted ballistic chronograph for all Air Rifles. It is accurate, affordable, super easy to use, and best of all – no more missed readings! The NateChrony mounts onto your barrel with one of the adapters for perfect alignment every time.
Using your mobile phone as the screen and battery, means you get the best display on the market and never get surprised by a flat battery in your Chronograph.The NateChrony is fully featured and will provide all the data even the most demanding tuner requires. It displays a current shot string, and has four additional save slots – all of which retain the data when power is lost. You can configure pellet weight, display hold time, and adjust the NateChrony readings to match another Chronograph.
Specifications
Accuracy: calibrated to be within 1fps of actual pellet speed at 1,000fps from a certified set of master chronographs
Resolution: <0.1fps shot to shot at 1,000fps
Air powered guns only
CO2 power can cause vapour, not recommended
Maximum caliber: ~45-50 cal (depending on power)
Maximum power: 150 fpe
