All stock or custom magazines we carry or produce
-
Sale!
Dead Center Pellets
JTS Dead Center Pellets
$10.99 – $99.99Select optionsJTS Dead Center Pellets are the result of 2 years of development resulting in a premium airgun pellet line that utilizes the latest manufacturing equipment and processes to ensure quality and consistency. JTS engineers used aerodynamic principles when designing these pellets to ensure that every shot you make is accurate.
Even the screw-off lid on the tin is designed with air gunners in mind. The pellets are packed in each tin with foam on top and on the bottom to help keep these old boys pristine when you are ready to load them.
Best shipping value is realized when you buy in four sleeve quantities.
Available in:
- .22 caliber 18.1 gr 250 pcs per tin
- .25 caliber 25.3 gr 150 pcs per tin.
View the video below to see these pellets in action from our TacVenger Bullpup bottle gun at 50 yards!
-
Sale!
Stock Umarex Magazine
Umarex Gauntlet Rotary Magazine
$17.95Original price was: $17.95.$14.00Current price is: $14.00.The Gauntlet Rotary Magazine advances each pellet with the operation of the bolt on the Umarex Gauntlet PCP air rifle.
Features
- .177 = 12 shots
- .22 = 10 shots
- .25 = 8 shots
- .30 = 7 shots
-
Haji-Notos Mag 11 rounds
Notos Expanded Magazine
$30.00Select optionsIntroducing the Haji-Notos 11 Shot Expanded Magazine!
This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.
Please note that our design loads from the right.
Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.
The Haji-Notos magazine works with a red-dot or optic but does not work with Umarex fixed fiber optic sights.
LOADING THE NOTOS MAGAZINE
-
Gauntlet 1 or Gauntlet 2 Mini Magazine
HP Gauntlet, Mini Mag
$33.00Select optionsIntroducing the HP Mini Magazine.
The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.
The HP Mini magazine is designed to fit the Umarex Gauntlet 1 or 2 in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.
The stands only 40.90mm (1.610″)
The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe
Features
- An easy to load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 13 shots
- .25 = 11 shots
- The magazine height is 40.90mm (1.610″ )
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
-
Benjamin Marauder Mini Magazine
HP MROD Mini Mag
$33.00Select optionsIntroducing the HP Mini Magazine.
The same reliable design as our expanded magazine but is slightly shorter to allow the magazine to fit under your optic without the need to adjust or swap out your scope rings.
The HP Mini magazine is designed to fit the Benjamin Marauder in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots between reloads. The magazine’s operation is smoother and offers a more reliable chambering of rounds.
WILL NOT FIT THE BENJAMIN MARAUDER PISTOL
The stands only 40.90mm (1.610″ a little less than 5/8″)
The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe
Features
- Easy-to-load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = Holds 13 shots (Stock Mag Holds 10 Shots)
- .25 = Holds 11 shots (Stock Mag Holds 8 Shots)
- The magazine height is 40.90mm (1.610″ a little less than 1-5/8″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
-
Avenger/Origin Mini Magazine
HP Avenger Mini Mag
$33.00Select optionsIntroducing the HP Mini Magazine.
The same reliable design as our expanded magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.
The HP Mini magazine is designed to fit the Avenger and Origin in .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.
The stands only 40.90mm (1.610″ a little less than 5/8″)
The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe
Features
- An easy to load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 13 shots
- .25 = 11 shots
- The magazine height is 40.90mm (1.610″ a little less than 5/8″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
-
Beeman 1358 Mini Magazine
Hajimoto’s Beeman 1358 Mini Magazine
$33.00 – $35.00Select optionsIntroducing the HP Mini Magazine.
New magnetic lid design! This magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.
The HP Mini magazine is designed to fit the Beeman 1358 in .22 caliber. This magazine extends your capabilities by increasing the number of shots before requiring a reload.
The stands only 40.90mm (1.610″ a little less than 5/8″)
Removeable magnetic lid allows you to drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe
Features
- An easy to load design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 13 shots
- .177 = 18 shots
- The magazine height is 40.90mm (1.610″ a little less than 5/8″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
-
For Gauntlet .177, .22, .25 and .30 Calibers
Hajimoto’s Gauntlet Expanded Magazine
Rated 4.00 out of 5$35.00 – $40.00Select optionsNow offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.
Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.
The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell
Features
- An easy to load NO LID design or the new magnetic lidded version.
- No pre-winding is necessary.
- Easy partial fill design.
- .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
- .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
- The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
- The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
-
Fits both Avenger and Origin
HP Avenger Exp Mag
$35.00 – $40.00Select optionsNew redesigned HP 2.0 magnetic lid design is available for the .22 and .25 Caliber!
Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177, .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.
New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell
Features
- An easy to load NO LID design.
- New magnetic lid design available for .22.
- No pre-winding is necessary.
- Easy partial fill design.
- .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
- The magazine height of all calibers is 50.25MM (1.978″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
-
The MROD, Expanded Magazine
HP MROD Exp Mag
$35.00Select optionsHere is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.
WILL NOT FIT THE BENJAMIN MARAUDER PISTOL
New magnetic lid. This magazine fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.
Remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it.
Features
- Redesigned magnetic lid design available for .177, .22, and in .25 calibers now.
- Drop in loading.
- Easy partial fill design.
- .177 – 21 shots, an increase of 110% over the stock mag. The magazine’s height is 50.25MM (1.978″)
- .22 = 17 shots, an increase of 70% more shots over the stock mag. The magazine’s height is 50.25MM (1.978″)
- .25 = 14 shots which is an increase of almost 60% more shots over the stock mag The magazine height is 48.02MM (1.890″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
-
Airacuda & Airacuda Max .22/.25
Hajimoto’s Airacuda, Expanded Magazine
$35.00 – $40.00Select optionsHere is a high-quality, expanded capacity magazine specifically designed to fit the Airacuda line of PCP’s .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it for distance shooting.
The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell
Features
- An easy to load NO LID design.
- No pre-winding is necessary.
- Easy partial fill design.
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
- The magazine height of the Expanded mag for .22/.25 is 50.25MM (1.978″)
- The magazine height of the Mini mag for .22/.25 is 46.00MM (1.811″)
- Available in right-side loading for the .22 caliber soon to come for the .25 cal.
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE