A video that captures my continuing struggle to have a stable scope camera mount platform that will be to capture through the scope so I can share my shooting experiences.
As it relates to hammer bounce, you are absolutely correct that there is hammer bounce, but the shot chip chosen to demonstrate the old config (chipmunk shot) was prior to an HDD and then WAR SSG install. If you listen to the new configuration you will notice you do not hear the bounce anymore. At some point in my videos, I say and list that I installed a hammer debounce device, in those videos there were some shots with and some without the device installed. The issue is if you have an iPhone 6 on edge in its Z axis and the hammer traveling on the Y axis introduces those forces on the iPhone which in turn vibrates on the Y axis on the phone causing the phone to flex and in turn a blurry image. Because the phone is so thin, it essentially turns into a diving board BOING!. A better complete phone length plate to better support the phone might help eliminate the boing effect.
On my adventure through the scope mount trail, there are many other crafty people whom have shared their creations so we all can benefit from their ideas. The only credit that I am worthy to receive is the lighting of the dark road that others have made. I did not design the 3D component used it is the brainchild of CellusNZ.
My scope has an eye relief of 71mm-83mm , after this build the eye relief is 15mm-20mm.
The following two links are to images that capture the completed assembly. One with the camera by closed and the other with it open:
http://i.imgur.com/xcZP3Ys.jpg
http://i.imgur.com/eGJtwT1.jpg
Below are some useful links to some of the things that I speak to in this video.
Hajimotos scope cam on a Gamo rifle
https://www.youtube.com/watch?v=p2JrJ7xPnrw
Dead Eye Scope Cam Test video
Fieldsports Channel
https://www.youtube.com/watch?v=kcX47pdU3po
GoPro Hero4 Black
https://www.bhphotovideo.com/c/product/1078001-REG/gopro_chdhx_401_hero4_black_edition_adventure.html
GoPro Waterproof Camera Case
https://www.amazon.com/Vicdozia-Underwater-Blackout-Waterproof-Housing/dp/B016MUV1G8
Orion Steady PIX Deluxe Camera Mount
https://www.amazon.com/Orion-5338-SteadyPix-Deluxe-Camera/dp/B0069VXY7K
Accutact AngleSight
http://www.365airsoftshop.com/element-utact-angle-sight-ex251bk-p-2535.html
CellusNZ Creations
http://www.shapeways.com/product/SSS7BN4SY/gopro-scopecam-mount
CellusNZ YouTube Page describing mount
https://www.youtube.com/watch?v=Qa1fiWjppFs
Angle Sight Scope Cam Forum Post
http://www.airsoftsniperforum.com/33-lounge/12698-gopro-scopecam-project-angle-sight.html
Homedepot supplied 2" x 2′ ABS pipe
http://www.homedepot.com/p/VPC-2-in-x-2-ft-Plastic-ABS-Pipe-1202/202300519
Home Depot Supplied Feld Blanket
http://www.homedepot.com/p/Everbilt-4-1-2-in-x-6-in-Heavy-Duty-Self-Adhesive-Felt-Blankets-2-per-Pack-49950/203661133
Teds Hold Over
https://www.youtube.com/user/EdgunUSA
