DISCLAIMER: This video is meant for educational & documentary purposes only. All work on airguns and airgun accessories should be carried out by a proficient licensed professional. Hajimoto Productions Channel will not be held liable for any injury or damage resulting from attempting to duplicate anything shown in this video. By viewing this video, you are acknowledging the contents of this disclaimer.
####At minute marker 6:25 the SPACER ####
#### part#25 does NOT get reinstalled. I don’t ####
#### mention this but I don’t install it either ####
#### do not install the spacer. ####
I install a modification kit that takes the Gauntlet from 60 shots per fill to over 105 shots per fill using the stock 13 cu. inch removable tank.
The 37-minute installation video details the complete disassembly of the Gauntlet and step-by-step installations of the Valve modification, Hammer Spring, Power Adjuster, and Trigger spring.
I refer to the owner’s manual and the schematic drawing throughout the process so you will be able to refer to it at any point during the installation. If you need to see a parts schematic I have one here for your use: https://drive.google.com/open?id=1GUs…
***UPDATE***
1) If you are having the air leak out of the barrel as fast as you put air in, here are some steps to correct the issue.
2) Please note that I say and show the adjustment hole to be 5/16" which you can reduce to 1/8" if you measure correctly.
When I tune rifles for customers that hole is only 3/32". SANDPAPER BURNISHING TECHNIQUE
1) Make sure the gun is safe.
2) Cock the rifle so there is nothing pushing the poppet open.
3) If it still leaks you may have to do perform a more aggressive poppet valve burnishing technique as detailed in Travis’s video here: https://youtu.be/WS9v3-QUSX0?t=146
Here is a Shot string of a stock Gauntlet .22 Caliber with the Super Tune Kit Installed https://i.imgur.com/5ZcWtNd.jpgÂ
