Caliber: .177

For .177 Caliber rifle

For .177 Caliber rifle

  • Umarex Gauntlet Tune O-ring KitUmarex Gauntlet Tune O-ring Kit
    Price range: $11.00 through $20.00

    For G1 G2 & G30 Variants

    Umarex Gauntlet Tune O-ring Kit
    Price range: $11.00 through $20.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes two of my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options
  • Sale!
    Umarex Gauntlet Rotary Magazine
    Original price was: $17.95.Current price is: $14.00.

    Stock Umarex Magazine

    Umarex Gauntlet Rotary Magazine
    Original price was: $17.95.Current price is: $14.00.

    The Gauntlet Rotary Magazine advances each pellet with the operation of the bolt on the Umarex Gauntlet PCP air rifle.

    Features

    • .22 = 10 shots
    • .25 = 8 shots
    • .30 = 7 shots
    Select options
  • Umarex Gauntlet Regulator Shim PakUmarex Gauntlet Regulator Shim Pak
    $18.50
    Umarex Gauntlet Regulator Shim Pak
    $18.50

    Hajimoto Productions Regulator Shim Kit For Umarex Gauntlet

    I have put together a very easy and complete stainless steel shim kit so you can adjust your Gauntlets Regulator output. The shims that I have included give you a wide range of adjustability to mix and match different thicknesses to get the regulator to output exactly what you want. The shim kit comes with easy to follow instructions which guide you through the process as to what shims you need to add to typically achieve my recommendations for each Gauntlet Caliber.

    The shim kit contains:

    • 2 – #5 Shims.
    • 1 – #3 Shim.
    • 2 – #2 Shims.
      (Two #2’s = One #4 | Two #5’s = One #10 | One #5 + One #3 = One #8, and so on)

    To take a stock G1 .177/.22 from the stock 1100-1050PSI to my recommended 1350-1400PSI you would add two (2) #5 shims (10).
    To take a stock G1 .25 from the stock 1900-1950PSI to my recommended 2100-2200PSI you would add one (1) #3 shim (3).
    The included two #2 shims are for minor adjustments if you have a finicky regulator.

    DETAILED LESSON/EXAMPLE:
    Let’s say your .22 Gauntlets regulator only puts out 1300PSI after installing the two #5’s when it should be 1350 to 1400PSI, you would add one #2 for a total of 12 to help get it there. If after the addition of the one #2, you’re still 50psi short so you would pull out the #2 and use the #3 for a total of 13.

    Always use a regulator output tester to confirm the output pressure of your regulator. It is the only safe and sure way to properly adjust the pressure of your regulator.

    You have to fill and purge so the Belleville washers settle into the new preload. Be sure to slow fill your bottle the first time only to 500PSI and then purge it, fill slowly a second time to 1000, and then purge fill the final time slowly and watch to be sure the reg has settled and does not exceed your target pressure. If it does exceed your target pressure, stop filling, purge and shim less.

    If you rapid fill, there is a good chance you will pop your burst disc.

     

    Select options
  • High Travel Valve Stop For Umarex Gauntlet 1 or 2High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    Intended for higher power builds

    High Travel Valve Stop For Umarex Gauntlet 1 or 2
    $30.00

    This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.

    The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22.  Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same

     

    Select options
  • Notos Expanded MagazineNotos Expanded Magazine
    $30.00

    Haji-Notos Mag 11 rounds

    Notos Expanded Magazine
    $30.00
    Introducing the Haji-Notos 11 Shot Expanded Magazine!

    This is an expanded magazine for the Umarex Notos PCP. The magazine is a brand-new design that loads from the right and employs a removable magnetic lid for easy loading. Allow for a smooth and consistent chambering of rounds without issue.

    Please note that our design loads from the right.

    Be sure to install and remove the mag at least 10 times before using it so that it breaks into your mag well.

    The Haji-Notos magazine is compatible with a red-dot or optic, but it does not work with Umarex fixed fiber optic sights. Please note that the actual finish may differ from that shown in the photos.

    LOADING THE NOTOS MAGAZINE

    Select options
  • Hajimoto's Beeman 1358 Mini MagazineHajimoto’s Beeman 1358 Mini Magazine
    Price range: $33.00 through $35.00

    Beeman 1358 Mini Magazine

    Hajimoto’s Beeman 1358 Mini Magazine
    Price range: $33.00 through $35.00
    Introducing the HP Mini Magazine.

    New magnetic lid design! This magazine but shorter to allow the mag to fit under your optic without the need to adjust or swap out your scope rings.

    The HP Mini magazine is designed to fit the Beeman 1358 in .22 caliber. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    The stands only 40.90mm (1.610″ a little less than 5/8″)

    Removeable magnetic lid allows you to drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell, maybe

    Features

    • An easy to load design.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .22 = 13 shots
    • .177 = 18 shots
    • The magazine height is 40.90mm (1.610″ a little less than 5/8″)

    Please note that the actual finish may differ from that shown in the photos.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • Hajimoto's Gauntlet Expanded MagazineHajimoto’s Gauntlet Expanded Magazine
    Price range: $35.00 through $40.00

    For Gauntlet .177, .22, .25 and .30 Calibers

    Hajimoto’s Gauntlet Expanded Magazine
    Price range: $35.00 through $40.00

    Now offering two designs. The original NO LOD and the new magnetic removable HP 2.0 design allows for much faster loading.

    Here is a high-quality, high-capacity magazine designed to fit the Umarex Gauntlet 1 or 2 in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    The NO LID design means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design or the new magnetic lidded version.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 37.5% more shots over the stock magazine!
    • .30 = 11 shots which is an increase of 57.5% more shots over the stock magazine!
    • The magazine height for the .177, .22 and .25 is 50.25MM (1.978″)
    • The magazine height for the .30 is 46.20MM (1.820″) Max Slug/Pellet length supported 11.20mm (0.441″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • HP Avenger Exp MagHP Avenger Exp Mag
    Price range: $35.00 through $40.00

    Fits both Avenger and Origin

    HP Avenger Exp Mag
    Price range: $35.00 through $40.00

    New redesigned HP 2.0 magnetic lid design is available for the .22 and .25 Caliber!

    Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177,  .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.

    New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell

    Features

    • An easy to load NO LID design.
    • New magnetic lid design available for .22.
    • No pre-winding is necessary.
    • Easy partial fill design.
    • .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
    • .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
    • .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
    • The magazine height of all calibers is 50.25MM (1.978″)

    For the Avenger, Avenger Bullpup and not for the Avengex or Bullpup II variants.

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • HP MROD Exp MagHP MROD Exp Mag
    $35.00

    The MROD, Expanded Magazine

    HP MROD Exp Mag
    $35.00

    Here is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload.

    WILL NOT FIT THE BENJAMIN MARAUDER PISTOL

    New magnetic lid. This magazine fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell.

    Remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjust rings allow you to keep your scope optically centered leaving all the turret adjustment-free to use when you need it.

    Features

    • Redesigned magnetic lid design available for .177, .22, and in .25 calibers now.
    • Drop in loading.
    • Easy partial fill design.
    • .177 – 21 shots, an increase of 110% over the stock mag. The magazine’s height is 50.25MM (1.978″)
    • .22 = 17 shots, an increase of 70% more shots over the stock mag. The magazine’s height is 50.25MM (1.978″)
    • .25 = 14 shots which is an increase of  almost 60% more shots over the stock mag The magazine height is 48.02MM (1.890″)

    WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE

    Select options
  • HP Strip Stak Pak for Akela/KratosHP Strip Stak Pak for Akela/Kratos
    $40.00

    Akela/Kratos Strip Stak Pak

    HP Strip Stak Pak for Akela/Kratos
    $40.00

    INCLUDES NEW ENHANCED AIR STRIPPER DESIGN
    For .177 and .22 Caliber Only

    Strip Stak Pak for the Benjamin Akela and Kratos PCP’s
    A nine-piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle.

    The kit also provides variable-sized baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A8 adapter.
    The Air Stripper is threaded and comes with an o-ring and silicone grease for installation. The stock barrel shroud spring must be reused.     

    Replacement Air Stripper 0-ring is 14mm x 1.5mm

     

    Select options
  • Umarex Gauntlet Strip Stak Pak (Bundle)Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    for .177, .22 and .25 NOT .30

    Umarex Gauntlet Strip Stak Pak (Bundle)
    $45.00

    Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
    An efficient multiport polymer air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also includes variable baffle chambers to help reduce both noise and turbulence in the airflow. The result is a more laminar air stream, which reduces projectile instability and, as a secondary benefit, reduces the report of the rifle.

    BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
    Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is no room for the baffles in the DonnyFL Short Shroud.

    Polymer Air Stripper comes with o-ring and silicone grease for installation.

     

     

    Select options
  • HP Strip Stak Pak for PP750HP Strip Stak Pak for PP750
    $45.00
    HP Strip Stak Pak for PP750
    $45.00

    Strip Stak Pak for the Artemis PP750
    A five (5) piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
    Air Stripper comes with o-ring and silicone grease for installation.  Not available for Canada

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2026

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.