Sale!
Price range: $475.00 through $599.00
JTS COMP1 Portable PCP Compressor
- Max. pressure: up to 4,500 PSI.
- Power converter is built inside unit.
- Exclusive heat pipe cooling system.
- Adjustable auto-shutoff.
- Power source: 12V car battery or 110V/220V outlet.
- Moisture filter.
- The compressor includes carrying handle.
- Thermal dissipation system with high-flow fan cooling.
- No oil required.
- Built-in water separator.
- Jumper cables included.
- Includes fill hose.
- Sealed needle-style crankshaft roller bearing.
CONSIDER THE PACKAGE DEAL FOR AWESOME SAVINGS
Package deal includes Compressor, Large Filter with two Cartridges, and Microbore fill whip!
Here are the COMP1 OWNERS MANUAL and schematic for your use and reference.
The oil to use for this compressor is 100% synthetic and can be purchased through AMAZON at the following LINK
This lubrication has high thermal and oxidation stability assuring long fluid life in both operating and storage conditions; Excellent performance in high temperature, high load, and continuous operating conditions.
The JTS COMP1 compressor is exempt from any other published discounts or coupon codes.
All/any warranties are manufacturer provided.
Please follow the CUSTOMER REPAIR REQUEST information found on the JTS website
.
Additional information
| Weight | 384 oz |
|---|---|
| Dimensions | 15 × 14 × 9 in |
| Options | Compressor Only, Compressor with Large Filter and Whip |
You must be logged in to post a review.
You may also like…
-
Sold out!
Price range: $110.00 through $175.00PCP Air Compressor Filter 4500psi Oil Water Separator
Price range: $110.00 through $175.00Select options This product has multiple variants. The options may be chosen on the product pageA quality water, oil and odor filter system designed to protect your PCP’s! Consider selecting the combinations that come with the extra-length fill whip so you can stand your filter up and down and still have plenty of slack to connect to your PCP.
Whether you are using a hand pump or a personal compressor it is vitally important that only clean dry air be introduced in your air reservoir.
Made from high-quality aircraft aluminum and is rated for safe use.
Don’t make the mistake of not drying your air as it will destroy regulators as well as your aluminum pressure vessels.
Available with a 47″ high-quality stainless steel fitting hose to allow for convenient filling of your PCP.
Related products
-
Sale!
Price range: $75.00 through $93.00Gauntlet STK
Super Tune Kit (STK) for Gauntlet 1,2, OR LIMITED
Price range: $75.00 through $93.00Select options This product has multiple variants. The options may be chosen on the product pageTHIS ITEM IS NOT DESIGNED FOR THE GAUNTLET 30
IT HAS ITS OWN HAMMER PRELOAD ADJUSTER STOCKKits available to fit Gauntlet 1, Gauntlet 2, Gauntlet 2 SL, or Gauntlet 2 Limited 22/25, variants.
The single largest performance increase modification item for the Gauntlet. The Super Tune Kit allows complete power adjustment, opening the possibility of higher or lower foot-pounds (FPE) for whatever the user desires. Do you need only 5FPE? No problem back off the adjustment using a 5/64″ allen wrench and you are only delivering 5FPE and will realize over 200 shots on a stock bottle fill of 3000PSI!
Want 27-30FPE for dropping that 20lb trash bandit, no problem, crank up the adjuster using a 5/64″ allen wrench and you instantly have the power necessary for either long range or high energy delivery on target. The use of a chronograph is required to know the rate of travel of the projectile. (Power examples given are the .22 caliber version Gauntlet 1)
For the Gauntlet 1 and Gauntlet 2. Be sure to select the proper generation, as there is a difference, and improperly selected kits are not returnable.
BE SURE TO SELECT THE CORRECT GENERATION GAUNTLETCONTENTS:
- Adjuster Plug Assembly.
- Smaller, Lighter Composite Poppet.
- Hajimoto Hammer Spring (Black Long)
- Lighter Trigger Spring (Bright Small).
- 5/64″ Allen Wrench For Adjusting Power.
Be sure to follow my written instructions in the document below.
Use the video to install but follow these written instructions to adjust and tune the STK:Written Detailed Tuning Instructions for the STK
More details below.
Always read the content below because any revised instructions, video, photos, or other links will be there. -
$20.00HP Baffle Stack For Umarex Gauntlet
$20.00Select options This product has multiple variants. The options may be chosen on the product pagePart fits either the original Gauntlet or the Gauntlet 2
THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.
-
$45.00for .177, .22 and .25 NOT .30
Umarex Gauntlet Strip Stak Pak (Bundle)
$45.00Select options This product has multiple variants. The options may be chosen on the product pageHajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport polymer air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also includes variable baffle chambers to help reduce both noise and turbulence in the airflow. The result is a more laminar air stream, which reduces projectile instability and, as a secondary benefit, reduces the report of the rifle.BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is no room for the baffles in the DonnyFL Short Shroud.
Polymer Air Stripper comes with o-ring and silicone grease for installation.
Reviews
There are no reviews yet.