Description
Filter element: molecular sieve, activated carbon and felt absorbing pads and dividers.
Element lifetime: about 40*6.8L (415CI of air)
$30.00
Replacement / Additional Filter element. This cartridge is for the PCP Air Compressor Filter 4500psi Oil Water Separator we offer. The cartridge has molecular sieve, activated carbon, felt absorbing pads, and dividers installed and ready to go.
Sold out!
Additional information
| Weight | 4 oz |
|---|---|
| Dimensions | 9 × 1.5 × 1.5 in |
You must be logged in to post a review.
You may also like…
-
Sold out!
Price range: $59.95 through $69.95Microbore 4500PSI Extension
Ninja Microbore Fill Whip
Price range: $59.95 through $69.95Select options This product has multiple variants. The options may be chosen on the product page- 30% Lighter and Smaller than standard HPA hoses
- Extremely flexible 30 or 46 inch hose
- 4500 PSI working pressure
- Works with any HPA or CO2 system
- Made in USA
Related products
-
Sold out!
Original price was: $339.00.$295.00Current price is: $295.00.Flex Reg on 18ci/295cc/.29L CE Certified CF Tank
Power Flex Combo 18.3ci Carbon Fiber 4500PSI
Original price was: $339.00.$295.00Current price is: $295.00.Select options This product has multiple variants. The options may be chosen on the product pageIntroducing a Hajimoto Productions Exclusive offering!
18ci/295cc/.29L CE Certified CF TankFits the Gauntlet 2 without any modifications.
The CF Tank is CE Certified made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. An 18.3ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet! The massive volume of air afforded you is mind-blowing.
The diameter of the tank is 54-55mm across so a modification to the forearm is required if you desire to continue to use the Gauntlets tank shroud. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
Gauntlet Bottle Shroud Mod
Please see the examples provided in the accompanying photos.
The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. Please be careful if you have accessories on any of the MLok openings as the screws or MLok fasteners may scratch the tank when the shroud is slid forward or back.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!.
The cylinder’s outside dimension is slightly larger than the stock aluminum tank so my standard HP Barrel Band does not fit. You will need to use the HP Barrel Band CFT version
Regulator is Made in the USA! The Power Flex Combo is set to either of the two Gauntlet configurations. Simply select the proper configuration. Power Flex Combo Configuration For .177/.22 Cal Flex Reg set to 700 to 1500PSI
Power Flex Combo Configuration For .25 Cal Flex Reg set to 1600 to 2400PSI
DO NOT USE Power Flex Combo Configuration For .25 CONFIG on .177 or .22 they are not capable of handling the pressures. Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
-
$22.0030mm Long Quick Connecter
Extended Fill Coupler
$22.00Select options- Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
- This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
- If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
- Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
- A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
-
Price range: $310.00 through $325.00Flex Reg on 13ci Aluminum 3K
Gauntlet Flex Reg with 13ci Tank – Hajimoto Configurations
Price range: $310.00 through $325.00Select options This product has multiple variants. The options may be chosen on the product pageIntroducing a Hajimoto Productions Exclusive offer!
13ci/213cc/.21L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 13 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSIFlex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1600 to 2400PSIInstalls on the Gauntlet with minor tank shroud modifications.
A 13ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg with typical G1/2-14 threads connects to your Umarex Gauntlet 1 or Gauntlet 2 without any modifications!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 13 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
Reviews
There are no reviews yet.