Shogun 1.6 x 8 inches

$185.00

THIS IS AN AIRGUN ONLY PART

This part is designed and manufactured by DonnyFL

Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.

Clear
SKU: HPDFLSHO Categories: , , , Tags: , , , ,

Description

  • If you thought Sumo was quiet wait until you hear Shogun. Shogun is just like Sumo but 1.5 inches longer. We added an additional 1 inch chamber as well as increase the first expansion chamber by .5 inches and the chamber by the exit hole another .5 inches. This design is very effective.
    • Available in .22/.30 calibers with 1/2 x 20 UNF threaded end cap
    • Mono-core design to increase accuracy and limit the chances of pellet clipping
    • No moving parts or epoxy that may become loose after 1000’s of rounds
    • Precision CNC’d by professional machinist
    • Sand blasted and anodized for maximum durability
    • Take apart in less than 10 seconds by unscrewing the rear end cap and pushing back the mono-core. No silly hex key or torch needed when you want to perform maintenance inside the unit.
    • Customizable, you can further dampen the sound by wrapping the interior tube with different sound absorbing materials.
    • Comes pre-wrapped in felt
    • Machined grooves on the outside for easy handling.
    • Weight 7.2 oz

Additional information

Weight 6 oz
Dimensions 8 × 1.6 × 1.6 in
Caliber

,

Reviews

There are no reviews yet.

Be the first to review “Shogun 1.6 x 8 inches”

Related products

  • $20.00
    HP Baffle Stack For Umarex Gauntlet
    $20.00

    Part fits either the original Gauntlet or the Gauntlet 2

    THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.

    Select options
  • Gauntlet Short Shroud Combo
    $130.00 – $215.00

    for .177, .22 and .25 NOT .30

    Gauntlet Short Shroud Combo
    $130.00 – $215.00

    This part is designed and manufactured by DonnyFL for airgun use only

    Part fits Gauntlet .177, 22 or the .25 caliber but does NOT fit the Gauntlet .30 caliber

     

    Stock baffle spring must be used!
    Remember to always order your suppressor one size larger for shrouded barrel PCP’s. DonnyFL Suppressors are sized so the first number is your PCP’s actual caliber and the second number is one size up. So if you owned a .22 caliber Gauntlet, the size you would select is .22/.25. If you had a .25 you would choose the .25/.30.

    If Your Gauntlet is:

    • .177 Get a .177/.22 Supressor
    • .22 Get a .22/.25 Supressor
    • .25 Get a .25/.30 Supressor

    Get it?

    Select options
  • Umarex Gauntlet Tune O-ring Kit
    $17.00

    Gauntlet 1 and Gauntlet 2

    Umarex Gauntlet Tune O-ring Kit
    $17.00

    Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2

    Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.

    I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.

    Some of the NO-Ring seals have the leading edge precision ground.

    These tapered / precision ground types need to be installed as shown below

    (Images are of the .30 caliber NO RING)

    You get:

    • 2  of pellet probe NO-ring seals.
    • 2 sets of barrel o-rings.
    • 2 sets of tank block o-rings.
    • 2  of valve body o-rings.

     

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.