RTI Priest 2 Shroud Extender #A66
$35.00
If your Priest shroud sits behind the air bottle and you would like to use a larger suppressor, this extender will allow you to do so.
Features:
- 6061 T6 aluminum
- Knurled cap
- Matte black anodize
Additional information
Weight | 5 oz |
---|---|
Dimensions | 3 × 1.5 × 1.5 in |
You must be logged in to post a review.
Related products
-
HP Baffle Stack For Umarex Gauntlet
Rated 5.00 out of 5$20.00Select optionsPart fits either the original Gauntlet or the Gauntlet 2
THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.
-
Air Stripper, Tension Spring and Baffle Stack
HP Strip Stak Pak for Avenger
$47.00Select optionsUPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.
Strip Stak Pak for the Avenger
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.Replacement Air Stripper 0-ring is 14mm x 1.5mm
-
Hatsan Bullmaster/Galatian with 1/2 x 20 UNF and thread adapter #A35
$40.00Select optionsPlease note that when you add a suppressor to this gun, it does not properly index the magazine. If you plan to single load and use a suppressor that’ll be fine. I would also recommend using a suppressor one caliber size up to reduce the chance of pellet clipping.
Reviews
There are no reviews yet.