Power Flex Combo 22.5ci Carbon Fiber 4500PSI

Flex reg and 22.5ci/370cc/.37L CE Certified CF Tank
Sale!

Flex reg and 22.5ci/370cc/.37L CE Certified CF Tank

Original price was: $375.00.Current price is: $330.00.

Introducing a Hajimoto Productions Exclusive offer!

22.5ci/370cc/.37L CE Certified CF Tank
Newly redesigned unit
Now has a high pressure and low pressure burst discs!

Installs on the Gauntlet 2 with minor tank shroud modifications, forearm slides right over the carbon fiber cylinder.  Installation video at the bottom of the page.

The CF Tank is CE Certified and made to ISO 11119-3 standard. They have seamless aluminum alloy 6061 liner wound with high strength Japan-imported carbon fiber and glass fiber reinforced plastic full composite layers and subjected to an autofrettage pressure. This included a 22.5ci carbon fiber 4500PSI cylinder with externally adjustable Ninja Flex Reg for your custom build including the Umarex Gauntlet 1 or Gauntlet 2! The massive volume of air in these 22.5ci tanks is mind-blowing!

The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.

Please be careful if you have accessories on any of the M-Lok openings as the screws or MLok fasteners may protrude into the tank area and scratch the tank when the shroud is slid forward or back. We recommend that if you have any MLok accessories installed, you remove them when sliding the shroud on or off. We also recommend covering the brass inserts in the tank shroud with cloth tape to protect your carbon fiber finish.

The Gauntlet 2 forearm slides right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom. See photo below

Consider picking up our extended foster fill adapter to make coupling and filling a breeze.

The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!

When installing the Flex regulator on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.

Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!

Because of practical limitations, regulator output will be +/- 75PSI to the requested output.

Clear

Description

When installing the Flex regulator on the Umarex Gauntlet 1 or 2 (G1/G2). Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized

The Power Flex Combo is a 4500PSI Flex reg installed on a 22.5ci Carbon Fiber 4500PSI Cylinder.

The Flex reg allows for the user to adjust regulator output on the fly while the 22.5ci 4500PSI cylinder means shots galore!

CONFIGURATIONS:
1) – 500~1500 PSI  works well with the .177/.22 Caliber G1
2) – 1400~2400 PSI works well with the G1 .25 Caliber, G2 in .22 or .25 Caliber.
3) – 2100~3100 PSI works well with the Gauntlet .30 Caliber

If the Power Flex is going to be installed on a Gauntlet 1 and the tank shroud is going to be used, the shroud will need to be widened to allow the larger diameter carbon fiber tank to pass through.

The Gauntlet 1 tank shroud modification is offered as a service if you don't want to mess with it yourself.

Comes with a dedicated spanner wrench for adjusting the output of the Flex Reg.

WARNING!  Do not install any Power Flex Combo that exceeds the PCP's operating pressure limit. Damage to the PCP or bodily injury can result.

Please note, that you need to understand what you are buying and if you are not sure, you need to contact us and we will help you make the right selection for your airgun.

Flex Reg is Manufactured by Ninja Paintball.

Additional information

Weight 25 oz
Dimensions 11 × 2 × 3 in
PRESSURE SETTING

G1 .17/.22 – 500~1500PSI Output, G1 .25/G2 .22, .25 – 1500~2400PSI Output, G30 CAL 2100-3100PSI Output

Reviews

There are no reviews yet.

Be the first to review “Power Flex Combo 22.5ci Carbon Fiber 4500PSI”

You may also like…

  • Sale!
    HP Barrel Band For Umarex Gauntlet
    $25.00$35.00

    Includes G1, G2, G30, G2SL, & G30SL variants

    HP Barrel Band For Umarex Gauntlet
    $25.00$35.00

    Available in the classic Picatinny rail version or the 15mm thick rail less version.

    Versions for Gauntlet 1, Gauntlet 2, Gauntlet 30 as well as the SL Versions!

    Select options
  • Extended Fill Coupler
    $22.00

    30mm Long Quick Connecter

    Extended Fill Coupler
    $22.00
    •  Safe for use on all pre-charged equipment with a max working pressure of 340BAR, 5000psi. Do not exceed maximum working pressure.
    •  This extended socket is designed to allow connection to “Foster Type” fill nipples that are recessed deeply within the stock.
    •  If you need a coupler release tool, then this socket should overcome that problem as the release collar is a full 30mm long, as opposed to the 10.5mm long on a standard quick release foster coupler.
    •  Suitable for FX deep recess stocks, Daystate and Brocock deep recess stocks.
    •  A great answer for the Hajimoto Productions Flex Regulator install on the Umarex Gauntlet as shown in the photos below.
    Select options
  • Sale!
    Original price was: $60.00.Current price is: $49.00.
    28mm Digital Pressure Gauge – 1/8″ NPT
    Original price was: $60.00.Current price is: $49.00.

    THREAD: 1/8″ NPT

    Add to cart