$24.95 – $30.00
Ninja Paintball Tank Regulator Replacement Part #X_REG_RBLDKT – This Rebuild Kit for Ninja X Regulators ONLY.
Like the one below:
Other variants are for the Gauntlet 2 in .22 caliber, .25 caliber, and .30 caliber. Be sure to select the proper kit type. User selectable included burst disc rating (1.8K, 3K, 5K or 7.5K)
There is a Flex Reg option but it requires photos so we can be sure what variant you have.
Contains all the parts needed to rebuild the NINJA X Reg or Gauntlet 2 Regulators
| Weight | 2 oz |
|---|---|
| Dimensions | 1.5 × 2 × 1 in |
| Regulator Variant | Standard X Reg, Gauntlet 2 .22, Gauntlet 2 .25, Gauntlet 2 .30, Flex Reg |
| Burst Disc Rating | 1.8K, 3K, 5K, 7.5 |
You must be logged in to post a review.
THIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
for .177, .22 and .25 NOT .30
Part fits Umarex Gauntlet 177, .22 or .25. Not compatible with the Gauntlet .30 Caliber.
This part is designed and manufactured by DonnyFL
Gauntlet 1 and Gauntlet 2
Hajimoto Productions Tuning O-ring kit for the Gauntlet and Gauntlet 2
Now includes my “NO RING” pellet probe seals as HP-1 rather than the typical high wear donut orings.
I have put together the most common o-rings that fail during a tuning session. Most of the stock o-rings for the internals will gouge when the airgun is disassembled, this kit will allow you multiple attempts should any of the o-rings fail. Please note that the .30 caliber uses completely different internal o-rings than all previous Gauntlet Models including the .30 cal exclusive transfer port orings Which will be bagged as TP.
Some of the NO-Ring seals have the leading edge precision ground.
These tapered / precision ground types need to be installed as shown below
(Images are of the .30 caliber NO RING)
You get:
Reviews
There are no reviews yet.