$154.95 – $155.00
The Hajimoto M18*1.5 Thread can be used on 3000PSI bottles as well. Ninja Paintball is beginning to produce these with a polished brass bonnet. We will be forced to switch over to these polished brass version once all the black steel bonnets are gone.
This regulator is built with the ball/pin and spring removed so hot swapping will not be able to happen.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve.
You should never try and unscrew a high-pressure output paintball-style regulator (anything over 1000psi output) while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle.
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP Metric regulator output pressures in increments of 100PSI. This is a M18 threaded regulator made for M18 threaded bottles. This will not fit Umarex Gauntlet Bottles which are 5/8"-18 Threaded. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance. If you need a low output build with a fixed out of of something between 300 psi and 1100 psi, the CUSTOM pessure option and provide the output desired in the notes. If you are looking for a direct replacement for you Gauntlet2 .22, .25 & .30 You will want the 5/8"-18 Version that is found HERE
Ninja M18*1.5 Threaded High Pressure Regulator
Made for 3000PSI or 4500PSI Metric M18*1.5 threaded bottles.
American made Ninja Regulator.
Custom output pressure for your
needs.
We build the regulator to any custom
output pressure in 100 PSI increments.
| Weight | 9 oz |
|---|---|
| Dimensions | 5 × 2.5 × 2.5 in |
| Regulator Output | 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100, CUSTOM |
| Tank Pressure | 3000, 4500 |
You must be logged in to post a review.
As the name implies, this is the Ultimate Gauntlet 2 build.
The Gold, Platinum and Ultimate Packages are the only builds where data trends are supplied with your build. You received detailed data sheets with a matrix to show exactly how your rifle performed and what adjustment limits you can perform in easy to follow terms. Different ammo weights are charts as well as actual shot results of your rifle as it was tuned to achieve maximum accuracy.
You get optic, 22.5ci 4500PSI carbon fiber tank, externally adjustable regulator, hammer preload adjustment, Two stage trigger, DonnyFL Sumo suppressor, bipod, 300BAR portable compressor for air independence and so much more!
Important note: Our Sidelever cocking system requires the shooter to hold the Sidelever rearward during magazine changes
We supply you with a Umarex Gauntlet 2 completely tuned and every option available to go out and blasticate!
See way down below for a detailed description and breakdown of what is included.
Ordering procedures:
You will add any and all items to your cart including this Turnkey Gauntlet. Please use the notes section to communicate any special requests like trigger preferences or if you’re buying a scope and want a specific zero distance.
Lastly, if an item you want is out of stock and therefore your unable to add it to the cart, you can use the notes section to request the item as part of your build and we will settle up before the airgun ships.
When I receive this order, I will build it based on the information provided, and before the airgun ships, any credits or additional charges need to be settled.
Commonly asked questions once the Tuned Gauntlet is received:
Question: How do I change the power?
Answer: Here is a video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition.
HOW TO ADJUST POWER WITH STK
Question: How do I tune using the STK?
Answer: For written instructions on how to adjust the Super Tune Kit, click the below link.
WRITTEN STK ADJUSTMENT INSTRUCTIONS
Tatsu 1.6 x 4.25 inches
THIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember to always order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
The Tanto, Tatsu, FX, or Sumo are not recommended for the Gauntlet .30 caliber because of the relatively small internal volume of these suppressors and the elevated operating pressures of the G30. We recommend the Ronin be used on all of our G30 Builds.
for .177, .22 and .25 NOT .30
Hajimoto Productions Strip Stak Pak for the Gauntlet 1 or 2. Not compatible with the Gauntlet .30 Caliber.
An efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The HP Air stripper 2.0 comes with an o-ring. The kit also provides variable baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle.
BAFFLES CAN NOT BE USED WITH DONNYFL SHORT SHROUD
Because the Short Shroud is cut at a length that is a perfect fit for the air stripper and the spring. There is not any room for the baffles in the DonnyFL Short Shroud.
Air Stripper comes with o-ring and silicone grease for installation.
Air Stripper, Tension Spring and Baffle Stack
UPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.
Strip Stak Pak for the Avenger
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.
Replacement Air Stripper 0-ring is 14mm x 1.5mm
Reviews
There are no reviews yet.