Description
5/8″-18UNF Thread
Available for 3000PSI or 4500PSI with 5/8″-18UNF thread bottles.
American made Ninja Regulator.
Custom output pressure for your
needs.
We build the regulator to any custom
output pressure in 100 PSI increments.
Ninja X Reg Custom Output Regulator up to 3100psi
$144.95
This is a genuine Ninja Paintball High Pressue X reg in 5/8″-18UNF thread that can be used on 3000PSI or 4500PSI.
We do include the ball/pin and spring should you happen to have a thin pin depression system capable of actually opening the valve. The only function of this pin/ball is to allow the tank to retain air if it is off of the PCP. This is a paintball thing and should not be used in in HPA.
You should never try to unscrew a high-pressure output paintball-style regulator while it is under pressure. You will destroy the threads as they are not designed to be threaded on and off under load. Degas and then remove the regulator and bottle. Read more in the following article https://hajimotoproductions.com/index.php/2024/11/11/regulator-thread-damage/
This is a direct replacement for the regulator found on the Gauntlets G1, G2 and G30 Caliber
Take advantage of a quality regulator for your high pressure application. MADE IN THE USA! Ninja HP regulator output pressures in increments of 100PSI. Simply select your desired output pressure from 1100PSI TO 3100PSI All custom built pressure units will have a +/- 75 psi tolerance.
Additional information
| Weight | 8 oz |
|---|---|
| Dimensions | 5 × 2.5 × 2.5 in |
| Regulator Output | 1100 PSI, 1200 PSI, 1300 PSI, 1400 PSI, 1500 PSI, 1600 PSI, 1700 PSI, 1800 PSI, 1900 PSI, 2000 PSI, 2100 PSI, 2200 PSI, 2300 PSI, 2400 PSI, 2500 PSI, 2600 PSI, 2700 PSI, 2800 PSI, 2900 PSI, 3000 PSI, 3100 PSI |
| Tank Pressure | 3000, 4500 |
You must be logged in to post a review.
You may also like…
-
$1,999.99Hajimoto Gauntlet 2 – Ultimate Package
$1,999.99Select optionsAs the name implies, this is the Ultimate Gauntlet 2 build.
The Gold, Platinum and Ultimate Packages are the only builds where data trends are supplied with your build. You received detailed data sheets with a matrix to show exactly how your rifle performed and what adjustment limits you can perform in easy to follow terms. Different ammo weights are charts as well as actual shot results of your rifle as it was tuned to achieve maximum accuracy.
You get optic, 22.5ci 4500PSI carbon fiber tank, externally adjustable regulator, hammer preload adjustment, Two stage trigger, DonnyFL Sumo suppressor, bipod, 300BAR portable compressor for air independence and so much more!
Important note: Our Sidelever cocking system requires the shooter to hold the Sidelever rearward during magazine changes
We supply you with a Umarex Gauntlet 2 completely tuned and every option available to go out and blasticate!
See way down below for a detailed description and breakdown of what is included.Ordering procedures:
You will add any and all items to your cart including this Turnkey Gauntlet. Please use the notes section to communicate any special requests like trigger preferences or if you’re buying a scope and want a specific zero distance.
Lastly, if an item you want is out of stock and therefore your unable to add it to the cart, you can use the notes section to request the item as part of your build and we will settle up before the airgun ships.
When I receive this order, I will build it based on the information provided, and before the airgun ships, any credits or additional charges need to be settled.
Commonly asked questions once the Tuned Gauntlet is received:
Question: How do I change the power?
Answer: Here is a video that demonstrates how the power adjuster works if you should want to increase or decrease the power output for any given ammunition.
HOW TO ADJUST POWER WITH STKQuestion: How do I tune using the STK?
Answer: For written instructions on how to adjust the Super Tune Kit, click the below link.
WRITTEN STK ADJUSTMENT INSTRUCTIONS
Related products
-
$350.00Hajimoto Flex Reg on 22ci Aluminum 3K for the G1
Gauntlet Flex Reg with 22ci Tank – Hajimoto Configurations
$350.00Select optionsIntroducing a Hajimoto Productions Exclusive offer!
22ci/360cc/.36L Aluminum Tank 3000PSI
Newly redesigned unit
Now has a high pressure and low pressure burst discs!
Flex 22 Configuration For Generation 1 Gauntlet .177/.22 Cal
Stock .177/.22 | 3000/1100PSI Regulator
Flex 22 .177/.22 |3000/700 to 1500PSIFlex 22 Configuration For Generation 1 Gauntlet .25 Cal
Stock .25 | 3000/1900PSI Regulator
Flex 22 .25 | 3000/1500 to 2300PSIIf you are looking to add an externally adjustable reg to your Gauntlet 2, take a look at swapping your current fixed reg to the Flex reg found HERE
Installs on the Gauntlet with minor tank shroud modifications. (The Gauntlet 2 is shown to give an idea of what modification needs to happen and that is simply a hole drilled in the bottom of the plastic tank shroud for the fill nipple.
A 22ci aluminum 3000PSI cylinder with externally adjustable Ninja Flex Reg for your Umarex Gauntlet1! The volume of air in these 22ci tanks over the 13ci is mind-blowing!
The diameter of the tank is 54-55mm across so a modification to the forearm is required on a Gauntlet 1. I do offer a tank shroud modification service for Gauntlet 1 owners that can be added to a build or provided as a mail-in service.
The Gauntlet 2 forearm slide right over without any issue. Only one access hole needs to be drilled so the fill port is accessible at the bottom.
Consider picking up our extended foster fill adapter to make coupling and filling a breeze.
The Power Flex Combo allows the user to externally adjust the regulator output pressure on the fly with an adjustment range of 800PSI!
When installing the Flex 22 on the Umarex Gauntlet. Tighten the degassed tank and regulator assembly fully to the rifle, then back it off until the fill port is on the bottom and the gauges are left and right. Now fill the bottle with air and all will tighten up solid. Proper alignment will be achieved before the 360° maximum rotation limit is realized.
Comes with a dedicated Spanner Wrench for power adjustment. MADE IN THE USA!
Because of practical limitations, regulator output will be +/- 50PSI (3.5bar) within the requested output.
-
$28.00HP Air Stripper 2.0 For Umarex Gauntlet 1 and 2
$28.00Select optionsPart fits either the original Gauntlet or the Gauntlet 2
You must apply a liberal amount of silicone grease or other synthetic lube on the air strippers o-ring. Failure to do so will cause the o-ring to grip the dry interior of the shroud and cause damage to and break the air stripper. Please read the provided instructions.
Air Stripper comes with o-ring and silicone grease for installation.
-
Price range: $79.00 through $99.00FX No Limit Scope Rings 1″, 30mm and 34mm
Price range: $79.00 through $99.00Select options
FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.
You will want these rings if you are planning on using my Expanded Magazine.
Reviews
There are no reviews yet.