$20.00
Part fits either the original Gauntlet or the Gauntlet 2
THESE BAFFLES CANNOT BE USED INSIDE THE DONNYFL SHORT SHROUD.
A direct replacement multi-chamber cone baffle stack that strips away turbulent air and sound from the shot signature of the Umarex Gauntlet. The baffles trap sound and air in each cavity and force it to stay in the moderator chamber away from the pellet path. The use of the stock spring places tension on the barrel to help stabilize it during firing and also keeps the baffle stack concentric.
| Weight | 1 oz |
|---|---|
| Dimensions | 1 × 1 × 3.5 in |
| Caliber | .177, .22, .25, .177/.22 |
You must be logged in to post a review.
THIS IS AN AIRGUN ONLY PART
This part is designed and manufactured by DonnyFL
Remember it is recommended that you order your suppressor one size larger for shrouded barrel PCP’s.
If you have a .22 caliber shrouded barrel PCP, you’ll want to order a .25 caliber suppressor.
The .177/.22 is for shrouded barrel .177 or direct barrel threaded PCP’s in .22.
The .22/.25 is for shrouded barrel .22 or direct barrel threaded PCP’s in .25.
The .25/.30 is for shrouded barrel .25 or direct barrel threaded PCP’s in .30. The exception to this rule is the Gauntlet .30 which is shrouded but because of the unique end cap, marries the barrel and shroud at the end.
Intended for higher power builds
This part replaces part #19 and allows for greater valve dwell producing more power to be produced at higher regulator pressure settings.
The .22 caliber HTVS for the Generation 1 Gauntlet fits both the .177 and .22. Do not order Generation 1 HTVS for the Generation 2 Gauntlet, they are not the same
Includes G1, G2, G30, G2SL, & G30SL variants
Available in the classic Picatinny rail version or the 15mm thick rail less version.
Versions for Gauntlet 1, Gauntlet 2, Gauntlet 30 as well as the SL Versions!
rodney hayes (verified owner) –
Thanks for effort you put into the products you supply. I was concerned about my 25 gauntlet noise level after my first magizine of pellets. I live on a public access lake and the echo off the rear of my house projected out across the water when the gun fired. After the baffle install and barrel shroud vent mods the gun is now the quietest pcp in my collection. The pellet impact is louder than the barrel blast when fired. Thanks again.
chris basnett (verified owner) –
Like he says a 4 point drop in db. I had stock cone and a froggy239 (ebay) suppressor its db was 76.8 with the change to the stack pack DOWN to 72.7 happy camper and just ordered the air stripper. will leave comment next week