Eaglevision Scope Cam for GP 9,10,11,12 Hero Black

Two Bar or Collet Holder Versions

Two Bar or Collet Holder Versions

$294.00 – $405.00

A very high-quality scope camera unit made to support the GoPro 9, 10, 11. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

Collet Clamp System includes:

  • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
  • 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
  • 1 x GOPRO Housing 9, 10 ,11 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10 and 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
  • 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
  • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

Two Bar System includes:

  • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
  • 1 x 2B-USH which includes:
    Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
    34 mm to 30 mm Ring Adaptor
    34 mm to 25 mm Ring Adaptor
  • 1 x 2B-UCH which includes:
    2 x Aluminium Bars (17 mm long)
    1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
    2 x Ball Screws
    2 x Ball Grab Screws
  • 1 x GOPRO Housing 9,10,11, 12 Black + 3x MUN-1 It allows you to connect GOPRO 9, 10, 11 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
  • 1 x case The new waterproof case will allow you to store your camera mounting system tidy and safe.
  • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

Here is a great video from Eaglevision Cam demonstrating how to replace the lens on your GoPro 9-11 or 12 Camera

Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

Please be sure to visit his awesome YouTube channel for some really great airgunning content.

Clear
SKU: HPEVCSC-2 Categories: , , Tags: , , , ,

Description

Here are some valuable tips to help you record the best quality video:
1. Use a good scope with decent lens clarity and a larger objective to gather maximum light.
2. Use a high-quality camera for recording;
any action camera with a minimum resolution of 1920×1080 and 120 Frames per second. For the best slow-motion capture, 240FPS is preferable.
3. Obtain a good quality fixed camera lens like our 4K 1/1.8” 12MM for the GoPro.
4. Ensure that the scope and camera are set up and aligned correctly.
5. Use lower magnification with the scope, you will notice improved quality by using a fixed magnification, eg. 10×44
(Eaglevision does not recommend over x 10 magnification with the most common scopes on the market).
6. An optical zoom is preferred over digital zoom, which makes a lower image quality.

Additional information

Weight 16 oz
Dimensions 8 × 6 × 2.5 in
Image Split

50% x 50%, 25% x 75%
Attachment Method

USH-46, Two Bar System

Reviews

There are no reviews yet.

Be the first to review “Eaglevision Scope Cam for GP 9,10,11,12 Hero Black”

You may also like…

  • Sale!
    GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
    Original price was: $130.00.Current price is: $120.00.

    EagleVision 1/1.8″ 12MM LENS

    GOPRO 5,6,7 Black, Lens 4K 1/1.8” 12MM, M12 X 0.35
    Original price was: $130.00.Current price is: $120.00.

    Lens fits the GoPro 5, 6 and 7.

    This is a high-quality GoPro customized lens with special coatings and a large wide lens to get maximum light to GoPro camera when using Gopro on the rifle scopes, when using it for scope cam such as air gunning, air soft, paintball, hunting, etc. This lens is not a fisheye lens and because it is 12mm you will not need to do a bunch of post editing to get the image large enough to share.

    You will need to leave the square glass lens protector off because the lens protrudes beyond the housing. This doesn’t matter as the GoPro will be in a case once on the scope camera housing.

    Item includes:

    • Free case.
    • GoPro fitting Lens

    I only stock the 1/1.8 version because it is the better lens as it allows more light to the camera for brighter images.

    Please note:
    The GoPro it’s not included, it is only shown so one can see what the lens looks like installed.

    If you are looking to seal the space between the lens and the camera, there is an excellent product available by Hunters Custom Solutions LLC

    Just click HERE to be redirected to this product on his website.
    Be sure to tell Bob that Hajimoto sent ya ?

    Select options

Related products

  • Sold out!
    Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
    $99.00

    Eaglevision INS Mount

    Infinity INS Elevation Adjustable Scope Mount 30mm Ring Picatinny
    $99.00

    Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

    The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
    The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

    Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

    Item includes:

    • 2 x infinity scope mount.
    • 2 x allen key (different sizes).
    • 4 x spears screws.
    • 1 x large spear screw.
    • Protection ring fabric.
    • Waterproof case.
    Read more
  • Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
    $99.00

    Eaglevision IPS Mount

    Infinity IPS Elevation Adj Scope Mount 30mm Ring Picatinny TopRail
    $99.00

    Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anythingThis mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

    The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
    The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

    Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

    Item includes:

    • 2 x infinity scope mount.
    • 2 x allen key (different sizes).
    • 4 x spare screws.
    • 1 x large spear screw.
    • Protection ring fabric.
    • Waterproof case.
    Select options
  • FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00
    FX No Limit Scope Rings 1″, 30mm and 34mm
    $79.00 – $99.00

    FX shows that they are able to innovate not just within airguns themselves, but in other areas of the shooting sports. The FX No Limit scope rings are perfect for long-range shooting as you can vertically adjust and angle your mounts so you can always find the sweet spot on your scope. These rings are also very useful if you need to have your scope higher off the receiver to allow for oversized magazines or scope camera setups.

    You will want these rings if you are planning on using my Expanded Magazine.

    Select options

Copyright All rights reserved Hajimoto Productions LLC 2024

Proudly powered by WordPress . Theme: multipurpose shop by eDataStyle.