Eaglevision Picatinny to Dovetail

Related products

• 

  $110.00

  MDSR1 Micro Dot Sight with Riser

  Axeon Optics

  $110.00

  Featuring a one-power magnification, the MDSR1 Red Dot Sight from Axeon is a compact, ruggedly durable optical solution for your MSR platform that delivers high performance in a low or no maintenance package. The MDSR1 features a 20mm objective lens and a remarkable single CR2032 battery life of thirty thousand hours using the auto shut-off feature. The MDSR1 comes ready to mount with an included co-witness riser base, and the windage and elevation adjustments are one-half MOA increments. Small but highly efficient, this Axeon Optics MDSR1 Red Dot offered by Axeon Optical Solutions is an affordable solution that will give you an ultimate sight advantage at a price that won’t trouble your pocketbook.

  Features:

  • 1X Magnification
  • 20mm Objective
  • Red Dot LED Reticle
  • .50 MOA Adjustment Size
  • Adjustable Windage and Elevation

  Select options

• 

  $99.00

  Eaglevision IPS Mount

  Infinity IPS Elevation Adj Scope Mount 34mm Ring Picatinny TopRail

  $99.00

  

  Eaglevision has designed and developed an amazing scope mount that allows the scope to move vertically along a guided path. The mount is lockable in different positions using two screws. This mount version has a section of rail on top for the mounting of a flashlight or camera or anything This mount can be used as a low profile or be adjusted to the high profile too if your scope objective is too close to your rifle barrel or shroud. These mounts resolve a lot of problems for shooters who like to shoot long range and often run out of adjustment clicks on their turrets.

  The mount can also come in handy if you have not been able to use your favorite scope due to lack of space between the rings or the odd position of your dovetail or Picatinny rail on your gun. We are very proud of this product as it became a “must-have” for people who love their bullpups.
  The best application of this mount however is for people who want to reach out further than their ordinary mounts allow them to. By keeping the front mount at its lowest and elevating the rear mount to the highest point you can zero in your gun far beyond your normal mounts allows you to, without using the clicks on your turrets hence keeping the optical center of your scope intact (the ideal situation for long-range shooting).

  Another great feature is these mounts allow the scope to be lifted to allow for large or expanded magazines.

  Item includes:

  • 2 x infinity scope mount.
  • 2 x allen key (different sizes).
  • 4 x spare screws.
  • 1 x large spear screw.
  • Protection ring fabric.
  • Waterproof case.

  Select options

• 

  $289.00 – $390.00Price range: $289.00 through $390.00

  Two Bar or Collet Holder Versions

  Eaglevision Scope Cam for GP 5,6,7 Hero Black

  $289.00 – $390.00Price range: $289.00 through $390.00

  

  A very high-quality scope camera unit made to support the GoPro 5,6 or 7. This unit can be ordered in two different image split versions, one that sends 50% to the camera and 50% to the shooter’s eyes to allow for a brighter image to the shooters eye the other version sends 25% to the shooter’s eye and 75% of the image to the camera for the best image capture available. Couple the 25/75 split with the 1/1.8″ 4K lens and you have the best low light scope camera capture that can be had.

  Collet Clamp System includes:

  • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
  • 1 x USH-46 the universal scope holder will allow you to connect any of our camera mounting systems to almost any scopes from an outer scope diameter between 40mm-46.5mm.
  • 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
  • 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
  • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

  Two Bar System includes:

  • 1 x Side-Cam system including a rubber ring and a 0 coil eye rubber cap. There are two split degree choices, 75% to the camera, (reflection), and 25% passed to your eye, (transmission) Ideal for a professional who aims for a better quality recording, or a 50/50 version.
  • 1 x 2B-USH which includes:
    Scope Tube Holder (34 mm ring ) + 1 x Allen Key and 2 x Thumb Screws
    34 mm to 30 mm Ring Adaptor
    34 mm to 25 mm Ring Adaptor
  • 1 x 2B-UCH which includes:
    2 x Aluminium Bars (17 mm long)
    1 x Camera/Sidecam Ring + 4 x Grab Screws and 1 x Allen Key
    2 x Ball Screws
    2 x Ball Grab Screws
  • 1 x GOPRO Housing 5,6,7 Black + 3x MUN-1 It allows you to connect GOPRO 5, 6 and 7 to your side cam. Scope camera setups such as this one require the stock fisheye lens on the GoPro to be changed to a 12-14mm non distortion lens. Do not use with stock lens.
  • 1 x case the new waterproof case will allow you to store your camera mounting system tidy and safe.
  • 1 x Lens Air Pump Dust Blower For maintenance of the Side-Cam.

  Here is a high quality installation video from AirBuks that details the installation process of the Two Bar system.

  Here is another video that shows the Eaglevision Scope Cam USH system being installed.

  Please be sure to visit his awesome YouTube channel for some really great airgunning content.

  Select options