AE Swede
$130.00 Original price was: $130.00.$85.00Current price is: $85.00.
It is heavier made and over all much better with improved fitment and looks. Each chassis is 3D resin printed in house and then threads are finished with taps, bead blasted and then painted flat black with oil based enamel paint.
The V3 Chassis has greatly reduced flex and is overall much more solid than the previous versions. This chassis is not too tall like other 3D printed chassis and so the airgun does not turn into a sail or become tippy because of the added height. The side walls have been thickened over 5mm over the V1 chassis and is much more robust. It features improved styling and fitment via extra time spent in development. There is not void in the space behind the trigger group which was a weak spot on the previous V1 chassis.
Sold out!
Additional information
Weight | 5 oz |
---|---|
Dimensions | 5.5 × 3 × 1.25 in |
You must be logged in to post a review.
Related products
-
Air Stripper, Tension Spring and Baffle Stack
HP Strip Stak Pak for Avenger
$47.00Select optionsUPDATE: The newer avengers have a screw-on barrel shroud and an end cap that is a two-piece unscrewable but the STP still fits and works without an issue. unscrew the shroud rather than the little screw shown in the video and simply unscrew the baffle washer array off the end cap and you are good to go.
Strip Stak Pak for the Avenger
A six piece kit that includes an efficient multiport air stripper that strips and channels air away from the pellet to allow for a more stable and less turbulent pellet launch from the muzzle. The kit also provides baffle chambers to help remove both noise and turbulence in the air stream. The end result is a more laminar air stream which reduces projectile instability and as a secondary benefit, reduces the report of the rifle. This kit is 100% compatible with the stock end cap or the DonnyFL A50 adapter.
Air Stripper comes with o-ring and silicone grease for installation. The installation video for the Umarex Origin Strip Stak Pak is exactly the same so you can follow the installation video below.Replacement Air Stripper 0-ring is 14mm x 1.5mm
-
Adjustable Butt Stock
Butt Stock
$28.00Select optionsButt Stock this what is a part of the TacVenger
-
Fits both Avenger and Origin
HP Avenger Exp Mag
$35.00 – $40.00Select optionsNew new redesigned HP 2.0 magnetic lid design is available for the .22 Caliber!
Here is a high-quality, expanded capacity magazine designed to fit the Umarex Origin in .22 & .25 calibers as well as a version for Air Venturi Avenger in .177, .22 and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. Please remember we stock adjustable height scope rings by WestHunter, EagleVision, and FX, be sure to snag a set if you are worried about clearance issues plus adjustable rings allow you to keep your scope optically center leaving all the turret adjustment-free to use when you need it.
New magnetic lid design. means you simply rotate the projectile carousel and drop in each round. There is no need to preload the spring, you are winding the spring during the loading process. This fits under high-scope rings and some medium-scope rings. Your scope may need to be moved forward or back to clear the turret bell
Features
- An easy to load NO LID design.
- New magnetic lid design available for .22.
- No pre-winding is necessary.
- Easy partial fill design.
- .177 (Avenger only) – 21 shots which is an increase of 110% more shots over the stock magazine!
- .22 = 17 shots which is an increase of 70% more shots over the stock magazine!
- .25 = 15 shots which is an increase of 87.5% more shots over the stock magazine!
- The magazine height of all calibers is 50.25MM (1.978″)
WATCH THE VIDEO BELOW ON HOW TO LOAD MAGAZINE
Reviews
There are no reviews yet.